• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.819-825
• /
• 2016

In this paper, a phase locked loop structure with parallel dual loop which have a different bandwidth has been proposed. The bandwidths depending on transfer functions are obtained through dual loops. Two different bandwidths of each loop are used to suppress noise on the operating frequency range. The proposed phase locked loop has two different voltage controlled oscillator gains to control two different wide and narrow loop filters. Furthermore, it has the locking status indicator to achieve an accurate locking condition. The phase margin of $58.2^{\circ}$ for wide loop and $49.4^{\circ}$ for narrow loop is designed for stable operation and the phase margin of $45^{\circ}$ is maintained during both loops work together. It has been designed with a 1.8V 0.18um complementary metal oxide semiconductor (CMOS) process. The simulation results show that the proposed phase locked loop works stably and generates a target frequency.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.1
• /
• pp.50-56
• /
• 2010

The multi-wall carbon nano-tube composite mixed with carbon paste electrode presented more sensitive and selective amperometric signals in the oxidation of glucose than general screen-printed carbon electrodes(SPCEs). Redox mediators to transport electrodes from enzyme to electrodes are very important part in the biosensor. A novel osmium redox complex was synthesized by the coordinating pyridine group containing primary amines which were electrochemically immobilized onto the MWCNT-SPCEs surface. Electrochemical studies of osmium complexes were investigated by cyclic voltammetry, chronoamperometry. The surface coverage of osmium complexes on the modified carbon nano-tube electrodes were significantly increased at 100 time (${\tau}_0=2.0\;{\times}\;10^{-9}\;mole/cm^2$) compared to that of the unmodified carbon electrodes. It's practical application of the glucose biosensor demonstrated that it shows good linear response to the glucose concentration in the range of 0-10 mM.

• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.11-17
• /
• 2019

In this paper, the performance of a small fixed wing unmanned aerial vehicle is predicted theoretically with the minimum specifications and a low Reynolds number. Based on the results, it was compared with the results of an actual flight test and simple electric motor wind tunnel test. As a result of the validity of the analysis, a 3.5 kilograms class fixed wing small UAV can predict aerodynamic performance by general theory analysis. However, the required thrust was analyzed as a possible design error. Based on the results of this study, this paper proposed a method to minimize the design error when developing small fixed wing UAV flying in a low Reynolds number.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.350-354
• /
• 2008

Magnetically separable immobilized trypsin was developed and their biocatalytic activity was evaluated for the different immobilization media. The activity, recyclability, pH effect, and stability of immobilized enzymes were evaluated for the different supporting media. The biocatalytic activity of immobilized trypsin was highest with magnetically separable polyaniline (PAMP), and Vm and Km of PAMP were 0.169 mM/min and 0.263 mM respectively. With increasedpH, the biocatalytic activity increased for all supporting materials used. Immobilized enzymes were recycled and recycle activities were over 90% of their original activity after ten times reuse. The operational stabilities of enzymes were greatly improved with enzyme immobilization.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.392.2-392.2
• /
• 2016

본 연구에서는 인버티드 유기 태양전지에 적용하기 위한 버퍼 하이브리드 투명 캐소드를 RF/DC magnetron 스퍼터를 이용하여 제작하고 그에 대한 특성평가와 적용 가능성에 대해 연구하였다. 버퍼-캐소드 하이브리드 투명 전극은 ZnO, Ag, ITO를 이용하였고, Ag와 ITO의 두께는 고정한 상태에서 버퍼 역할을 하는 ZnO의 두께를 변수(25 nm ~ 45 nm)로 하여 ZnO두께에 따른 광학적, 전기적, 구조적, 표면 특성을 분석하였다. ZnO/Ag/ITO 하이브리드 투명전극의 최적의 조건에서 92%의 높은 투과도와 7.6 Ohm/square의 낮은 면저항을 갖는 버퍼-캐소드 하이브리드 투명전극을 구현하였다. 제작한 ZnO/Ag/ITO 버퍼 하이브리드 투명전극을 인버티드 유기 태양전지에 적용한 결과 버퍼 ZnO층을 스핀 코팅으로 제작한 인버티트 유기 태양전지에 비해 현저하게 낮은 효율을 나타내는 것을 확인 하였다. 이러한 이유를 규명하기 위해 스핀 코팅한 ZnO박막과 스퍼터 한 ZnO박막의 구조적, 표면적 특성을 비교 분석 하였고, UPS 분석 결과 스핀 코팅한 ZnO 박막의 일함수(3.3 eV)에 비해 스퍼터 한 ZnO박막의 일함수(4.4 eV)가 더 큰 것을 확인 할 수 있었다. 이를 통해 인버티드 유기 태양전지 소자의 효율을 높이기 위해서는 광학적 전기적 특성뿐 아니라 적절한 일함수와 공정방법의 중요성을 확인 하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.89-93
• /
• 2009

In this paper, we investigated effect of sensing time on the performance of enhanced spectrum sensing method, which is the energy detector with multiples of verification using time delay, under Suzuki channel. We assumed that SNR is 1dB, $P_{FA}=0.1$ and various mobile speed such as 3, 60, 110 km/h. The performance is investigated by simulation and compared to that of conventional energy detector.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.108-118
• /
• 2014

On the optimization design problem using surrogate model, it requires considerable number of sampling points to construct a surrogate model which retains the accuracy. As an alternative to reduce construction cost of the surrogate model, Variable-Fidelity Modeling(VFM) technique, where correct high fidelity model based on the low fidelity surrogate model is introduced. In this study, hierarchical kriging model for variable-fidelity surrogate modeling is used and an optimization framework with multi-objective genetic algorithm(MOGA) is presented. To prove the feasibility of this framework, airfoil design optimization process is performed for the transonic region. The parameters of PARSEC are used to design variables and the optimization process is performed in case of varying number of grid and varying fidelity. The results showed that pareto front of all variable-fidelity models are similar with its single-level of fidelity model and calculation time is considerably reduced. Based on computational results, it is shown that VFM is a more efficient way and has an accuracy as high as that single-level of fidelity model optimization.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.77-80
• /
• 2001

최근에 cdma2000-lx 시스템의 역방향에 파일럿 채널이 추가되면서 적은 계산량으로 구현이 가능한 LMS 빔 형성 기법이 연구되고 있다. 그러나 기존의 LMS 빔 형성 방식의 경우 무선 페이딩 채널에 적응하기 위하여 고정된 step-sire parameter를 이용하였다. 하지만 이러한 고정된 step-size parameter를 사용할 경우 MSE가 증가하여 좋은 성능을 얻을 수 없다. 따라서 본 논문에서는 LMS 순 방향 빔 형성 기법에서 채널을 추정하여 추정된 채널과 LMS 가중치의 오차에 적응하는 step-size parameter를 결정함으로써 적은 MSE만으로 가중치 값을 추정하는 CA-LMS(Channel Adaptive Least Mean Square) 방식을 이용한 순방향 빔 형성 기법을 제안한다. 제안한 방식에 대하여 cdma2000-lx 환경에서 다양한 페이딩 환경에 적용하여 제안한 방식이 우수함을 확인 할 수 있다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2008

Purpose: For head and neck cancer patients treated with radiation therapy, proper immobilization of intra-oral structures is crucial in reproducing treatment positions and optimizing dose distribution. We produced a man-made tongue immobilization device for each patient subjected to this study. Reproducibility of treatment positions and dose distributions at air-and-tissue interface were compared using man-made tongue immobilization devices and conventional tongue-bites. Materials and Methods: Dental alginate and putty were used in producing man-made tongue immobilization devices. In order to evaluate reproducibility of treatment positions, all patients were CT-simulated, and linac-gram was repeated 5 times with each patient in the treatment position. An acrylic phantom was devised in order to evaluate safety of man-made tongue immobilization devices. Air, water, alginate and putty were placed in the phantom and dose distributions at air-and-tissue interface were calculated using Pinnacle (version 7.6c, Phillips, USA) and measured with EBT film. Two different field sizes (3$\times$3 cm and 5$\times$5 cm) were used for comparison. Results: Evaluation of linac grams showed reproducibility of a treatment position was 4 times more accurate with man-made tongue immobilization devices compared with conventional tongue bites. Patients felt more comfortable using customized tongue immobilization devices during radiation treatment. Air-and-tissue interface dose distributions calculated using Pinnacle were 7.78% and 0.56% for 3$\times$3 cm field and 5$\times$5 cm field respectively. Dose distributions measured with EBT (international specialty products, USA) film were 36.5% and 11.8% for 3$\times$3 cm field and 5$\times$5 cm field respectively. Values from EBT film were higher. Conclusion: Using man-made tongue immobilization devices made of dental alginate and putty in treatment of head and neck cancer patients showed higher reproducibility of treatment position compared with using conventional mouth pieces. Man-made immobilization devices can help optimizing air-and-tissue interface dose distributions and compensating limited accuracy of radiotherapy planning systems in calculating air-tissue interface dose distributions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.285-286
• /
• 2015

반도체 패키지 솔더범프용 주석계 도금액에 적용 가능한, 친환경 산화방지제 몇 종에 대하여 연구하였다. 주석계 전기도금액에 포함된 산화방지제는 주석의 산화방지 외에도, 전류효율, 도금액의 안정성, 그리고 형성된 솔더범프의 특성 등에 영향이 있음을 확인 하였다.