• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.570-593
• /
• 1996

This study was intended to perform the influence of condyle positional change after surgical correction of skeletal Class III malocclusion after BSSRO in 20 patients(males 9, females 11) using computed tomogram that were taken in centric occlusion before, immediate, and long term after surgery and lateral cephalogram that were taken in centric occlusion before, 7 days within the period intermaxillary fixation, 24hour after removing intermaxillary fixation and long term after surgery. 1. Mean intercondylar distance was $84.45{\pm}4.01mm$ and horizontal long axis of condylar angle was $11.89{\pm}5.19^{\circ}$on right, $11.65{\pm}2.09^{\circ}$on left side and condylar lateral poles were located about 12mm and medial poles about 7mm from reference line(AA') on the axial tomograph. Mean intercondylar distance was $84.43{\pm}3.96mm$ and vertical axis angle of condylar angle was $78.72{\pm}3.43^{\circ}$on right, $78.09{\pm}6.12^{\circ}$on left. 2. No statistical significance was found on the condylar change(T2C-T1C) but it had definitive increasing tendency. There was significant decreasing of the distance between both condylar pole and the AA'(p<0.05) during the long term(TLC-T2C). 3. On the lateral cephalogram, no statistical significance was found between immediate after surgery and 24 hours after the removing of intermaxillary fixation but only the lower incisor tip moved forward about 0.33mm(p<0.05). Considering individual relapse rate, mean relapse rate was 1.2% on L1, 5.0% on B, 2.0% on Pog, 9.1% on Gn, 10.3% on Me(p<0.05). 4. There was statistical significance on the influence of the mandibular set-back to the total mandibular relapse(p<0.05). 5. There was no statistical significance on the influence of the mandibular set-back(T2-T1) to the condylar change(T2C-T1C), the condylar change(T2C-T1C, TLC-T2C) to the mandibular total relapse, the pre-operative condylar position to the condylar change(T2C-T1C, TLC-T2C), the pre-operative mandibular posture to the condylar change(T2C-T1C, TLC-T2C)(p>0.05). 6. The result of multiple regression analysis on the influence of the pre-operative condylar position to the total mandibular relapse revealed that the more increasing of intercondylar distance and condylar vertical axis angle and decreasing of condyalr head long axis angle, the more increasing of mandibular horizontal relapse(L1,B,Pog,Gn,Me) on the right side condyle. The same result was founded in the case of horizontal relapse(L1,Me) on the left side condyle.(p<0.05). 7. The result of multiple regression analysis on the influence of the pre-operative condylar position to the pre-operative mandibular posture revealed that the more increasing of intercondylar distance and condylar vertical axis angle and decreasing of condylar head long axis angle, the more increasing of mandibular vertical length on the right side condyle. and increasing of vertical lengh & prognathism on the left side condyle(p<0.05). 8. The result of simple regression analysis on the influence of the pre-operative mandibular posture to the mandibular total relapse revealed that the more increasing of prognathism, the more increasing of mandibular total relapse in B and the more increasing of over-jet the more increasing of mandibular total relapse(p<0.05). Consequently, surgical mandibular repositioning was not significantly influenced to the change of condylar position with condylar reposition method.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.627-635
• /
• 1999

Soft tissue changes that occurred between presurgery to 5-years post-surgery in 49 orthognathic surgery patients whose maxillae were moved upward by Le Fort I osteotomy were examined by lateral cephalometric film. The objective of this paper was to document soft tissue changes at long-term follow-up after superior repositioning of the maxilla and to relate soft tissue and hard tissue changes in this group. The results were as follows. 1. On average, soft tissue landmarks in the nose and the upper lip were not changed statistically significantly except superior movement of superior labial sulcus and forward movement of pronasale between presurgery and 5 years postsurgery. 2. Upward and forward movement of the lower lip were found at 5 years postsurgery in comparison with presurgery and genioplasty added this effects. 3. Upper lip length and vertical dimension of upper vermilion didn't show any significant changes, but increase of lower lip length and decrease of vertical dimension of lower vermilion were statistically significant between presurgery and 5 years post-surgery. 4. The decrease of upper incisor exposure and interlabial distance from presurgery to 1 year were continued from 1 year to 5 years and the amount of the decrease was more than that of vertical movement of the maxilla by surgery. 5. Long term changes in soft tissue landmarks from 1 to 5 years postsurgery exceeded hard tissue changes, meaning soft tissue moved down more than skeletal changes.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.299-310
• /
• 1995

The purpose of this study is to know about the positional change of second molar when orthodontic treatment is performed. To know about it, we andlysed cephalogram pre. and post treatment for 54 adult patients who werefinished orthodontic treatment by banding to the first molar and classify them into 4 groups Class I extraction group 15, Class I nonextraction group 12, Class II group 13, class Class III group 14. The following conclusions were obtained : 1. In the extraction group of Class I , mandibular second molar showed less extrusion and mon distal inclination than first moarl. But maxillary second molar showed more or less extrusive and mesial inclination to much the same degree of first molar. 2. Inthe non-extractio group of Class I, mandibular second molar in intrusive to first molar, it showed smilar distal inclination to first molar. But maxillary second molar is extrusive similarly to first molar. 3. In the group of Class II , mandibular second molar is less extrusive than first molar and maxillary second molar is more extrusive than first molar. 4. In the group of Class III, mandibular second molar showed similar extrusion to first molar and more distal inclination than first molar. But maxillary second molar showed less extrusion than first molar. 5. A comparision of the positional change of second molar among groups : The change of distance from FH plane to funcation point of maxillary second molar is the difference between Class I extraction group and Class II group, Class I extraction group and Class III group. The change of maxillary second molar to palatal plane and occlusal plane is the difference between Class I extraction group and Class III group. And the change of distance from mandibular plan to furcation point of mandibular second molar is difference between Class I extraction group and non-extraction group, Class I non-extraction group and Class II group, Class I non-extraction group and Class III group. But the change of angle of mandibular second molar to mandibular plane and occlusal plane is make no difference in among groups.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.94-100
• /
• 2010

Purpose: We can evaluate function of kidney by Glomerular Filtration Rate (GFR) test using $^{99m}Tc$-DTPA which is simple. This test is influenced by several parameter such as net syringe count, kidney depth, corrected kidney count, acquisition time and characters of gamma camera. In this study, we evaluated predose count according to matrix size in the GFR test using $^{99m}Tc$-DTPA. Materials and Methods: Gamma camera of Infinia in GE was used, and LEGP collimator, three types of matrix size ($64{\times}64$, $128{\times}128$, $256{\times}256$) and 1.0 of zoom factor were applied. We increased radioactivity concentration from 222 (6), 296 (8), 370 (10), 444 (12) up to 518 MBq (14 mCi) respectively and acquired images according to matrix size at 30 cm distance from detector. Lastly, we evaluated these values and then substituted them for GFR formula. Results: In $64{\times}64$, $128{\times}128$ and $256{\times}256$ of matrix size, counts per second was 26.8, 34.5, 41.5, 49.1 and 55.3 kcps, 25.3, 33.4, 41.0, 48.4 and 54.3 kcps and 25.5, 33.7, 40.8, 48.1 and 54.7 kcps respectively. Total counts for 5 second were 134, 172, 208, 245 and 276 kcounts from $64{\times}64$, 127, 172, 205, 242, 271 kcounts from $128{\times}128$, and 137, 168, 204, 240 and 273 kcounts from $256{\times}256$, and total counts for 60 seconds were 1,503, 1,866, 2,093, 2,280, 2,321 kcounts, 1,511, 1,994, 2,453, 2,890 and 3,244 kcounts, and 1,524, 2,011, 2,439, 2,869 and 3,268 kcounts respectively. It is different from 0 to 30.02 % of percentage difference in $64{\times}64$ of matrix size. But in $128{\times}128$ and $256{\times}256$, it is showed 0.60 and 0.69 % of maximum value each. GFR of percentage difference in $64{\times}64$ represented 6.77% of 222 MBq (6 mCi), 42.89 % of 518 MBq (14 mCi) at 60 seconds respectively. However it is represented 0.60 and 0.63 % each in $128{\times}128$ and $256{\times}256$. Conclusion: There was no big difference in total counts of percentage difference and GFR values acquiring from $128{\times}128$ and $256{\times}256$ of matrix size. But in $64{\times}64$ of matrix size when the total count exceeded 1,500 kcounts, the overflow phenomenon was appeared differently according to predose radioactivity of concentration and acquisition time. Therefore, we must optimize matrix size and net syringe count considering the total count of predose to get accurate GFR results.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.1
• /
• pp.101-142
• /
• 1998

1. Objects The base of classification of Sasang Constitution was the different congenital formation of organs such as lungs, spleen, liver, kidneys, and it was expanded from the viscera region of lungs, spleen, liver, kidneys to the body shape of trunk. The researched about body shape of Sasang Constitution have had points of issues which derived by measurement with hands. But this study was measured the characteristics of body shape putting in importance of anatomical position with the computerized 3-Dimension scanner, which minimized the errors of measurement, and it was abled the cubic measurement such as volume, area of cross section as well as round length. 2. Materials & Method The examinee was healthy male 40 persons and female 20 persons from 20's to 40's, who was diagnosed by the specialist of Sasang Constitutional Medicine. The body shape was measured round length, area of cross section, and volume of 31 anatomical points and the 25 hypothesis with the Rapid 3D Color Scanner Model 3030 RGB/PS. And the characteristics of each constitution's body shape was derived. 3. Results & Concousion In female, Taeumin had the largest trunk and Soeumin had the smallest trunk compared to other constitution, but Soyangin had only the smallest neck. Soeumin has the smallest round length of nipple and the $CV_{12}$, and Soyangin has the smallest breadth of ASIS. Soyangin had the smallest volume from thyroid bone to the highest points of armpits and from sternum to nipple. Taeumin had the largest volume from sternum to the $CV_{12}$ and from sternum to xiphoid process. In male, Taeumin had the largest trunk and Soeumin had the smallest trunk from the level of thyroid bone to ASIS. Soyangin has the longest distance and Soeumin has the shortest distance from nipple to the lowest of breast. Taeumin had the largest volume of trunk and Soeumin had the smallest volume of trunk. In the ration of four-Cho, Taeumin had the longest distance from the highest points of armpits to nipple and Soyangin had the shortest distance of that. Soyangin had the smallest ratio of the height of upper middle cho. Soeumin had the smallest ratio from the $CV_{12}$ to navel among trunk. In the correlation among the four Cho, Taeumin had the negative correlation between the Upper-Cho and the Lower-Middle-Cho significantly.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.33-41
• /
• 2000

Although it is well known that the chincup, used to correct a skeletal class III malocclusion in growing children, reduce the mandibular prognathism by arresting the growth of the mandibular length and rotating the mandible posteroinferiorly, the majority of the studies about chincup is focused on condylar head that plays an Important role in mandibular growth. The aim of this study was to evaluate the morphologic change of the mandibular symphysis where extraoral force is applied directly during chincup treatment. The data lot this study were obtained from lateral cephalometric radiographs of 62 growing children(chincup group:32, control group:30) with mixed dentition who had been accepted lot the orthodontic treatment at Chonbuk National University Dental Hospital. The results were as follows : 1. Symphysis height was increased both in chincup therapy group and control group during treatment. Symphysis depth was decreased or maintained the initial values in chin cup therapy group, whereas increased in control group. Posterior symphysis depth was decreased both in chin cup therapy group and control group, but anterior svmphysis detph was increased in control group, whereas decreased in chincup therapy group. 2. Chin depth and chin curvature were increased in control group, whereas maintained or decreased in chincup therapy group during treatment. Chin angle, menton ang1e and symphysis angle were decreased in control group, whereas increased in chincup therapy group. It suggested that bone deposition in pogonion area that occur normally with mandibular growth was supressed by direct contact of chincup. 3. When growing children wear chincup, symphysis morphology was maintained due to inhibition of forward growth at mandibular symphysis. It may be due to the suppression of bone deposition in anterior part of symphysis.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.55-62
• /
• 2006

Orthodontic mini-implants, despite its usefulness as anchorage, have some limits such as loosening. Therefore, various shapes and lengths have been studied. The aim of this study is to analyze the shape and length of mini-implants mechanically. The shapes of mini-implants (1.6 mm, Dual Top, Jeil Medical Co., Seoul, Korea) were cylindrical and taper. The lengths of mini-implants were 6 mm and 8 mm. The tested groups were 5 groups (cylindrical 6 mm, cylindrical 8 mm, taper 6 mm, taper 8 mm and taper 8 mm modified whose thread is reduced from the middle to upper part). All were inserted and removed on the polyurethane foam with the torque measured. During insertion and removal, the taper shape needed higher torque than the cylindrical shape, and the 8 mm length than the 6 mm length (p<0.001). The taper 6mm group showed superior insertion torque (p<0.001) and similar removal torque to the cylindrical 8 mm group. The taper 8 mm modified group with gradually reduced threads, showed continuous high removal torque after the peak. The initial mechanical stability can be provided by the tapered shape and also, affected by length and thread design.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.273-282
• /
• 1997

The purpose of this study was to evaluate changes in mandibular movement patterns after orthognathic surgery in skeletal Class III patients. The sample consisted of 20 Class III malocclusion patients(9 males, 11 females). Just before and after(2-7months) surgery, maximum opening & closing movement, mandibular border movement on sagittal, frontal and horizontal planes were recorded using Sirognathograph & BioPak EGN. On each record, 21 items were measured and statistically analyzed. The results were as follows 1. Angle of protrusive movement on sagittal plane showed greatest change after surgery. Also, as the incisal guidance was established by surgery, straight path of protrusive movement became curved line. 2. Maximum opening distance and maximum antero-posterior distance on maximum opening & closing movement, maximum opening distance on sagittal plane, angle of left lateral excursion on frontal plane were statistically significant after snrgery(p<0.01). 3. Maximum width of lateral excursion on frontal plane, distane of right lateral excursion and angle of maximum left lateral excursion on horizontal plane were statistiraily significant after surgery(p<0.05). 4. Maximum opening distance and maximum antero-posterior distance on maximum opening & closing movement showed significant differences according to post-surgical time(p<0.05). More recovery of range of movement occured in 5-7month group than in 2-3month group. 5. As the occlusal interferences were removed by orthognathic surgery, irregular opening & closing path became smooth curve.

• The korean journal of orthodontics
• /
• v.38 no.3
• /
• pp.175-186
• /
• 2008

Objective: To evaluate the discrepancies between initial STO and final STO in Class III malocclusions and to find which factors are related to the discrepancies. Methods: Twenty patients were selected for the extraction group and 20 patients for the non-extraction group. They were diagnosed as skeletal Class III and received presurgical orthodontic treatment and mandibular set-back surgery at Pusan National University Hospital. The lateral cephalograms were analyzed for initial STO (T1s) at pretreatment and final STO (T2s) after presurgical orthodontic treatment, and specified the landmarks 3s coordinates of the X and V axes. Results: Differences in hard tissue points (T1s-T2s) in the X coordinates of upper central incisor edge, upper first molar mesial end surface, lower central incisor apex, lower first molar mesial end surface and mesio-buccal cusp and Y coordinates of upper central incisor edge, upper central incisor apex, upper first molar mesio-buccal cusp were statistically significant in the extraction group. Differences in hard tissue points (T1s-T2s) in the X coordinates of upper central incisor edge, lower central incisor apex, lower first molar mesial end surface and Y coordinates of lower central incisor apex were statistically significant in the non-extraction group. In the extraction group, the upper arch length discrepancy (UALD) had a statistically significant effect on maxillary incisor and first molar estimation. Lower arch length discrepancy and IMPA had statistically significant effects on mandibular incisor estimation in both groups. Conclusions: Discrepancies between initial STO and final STO and factors contributing to the accuracy of initial STO must be considered in treatment planning of Class III surgical patients to increase the accuracy of prediction.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.2
• /
• pp.128-134
• /
• 2008

Purpose: We prospectively evaluated the clinical usefulness of the patellar inferior pole (PIP) as a landmark of the anteromedial (AM) portal for the arthroscopic surgery of the medial mensiscus posterior horn (MMPH). Materials and Methods: Group 1 (50 normal left knees of adults), Group 2 (10 normal knees under anesthesia), and Group 3 (50 consecutive knees undergoing elective arthroscopic surgery for relatively simple intraarticular pathologies, or diagnostic arthroscopy) were included. In Group 1 and 2, the true lateral (A) and valgus stress lateral radiographs (B) on $30^{\circ}$ flexion were obtained, and the lines (AM portal line) passing through the PIP and distal-most medial femoral condyle (MFC) were drawn under the condition without considering the thickness of articular cartilage of MFC (1, 2-A, B group), and considering it as 2.5mm on B (1, 2-C group). Then, we investigated the meeting point of the AM portal line with medial tibial plateau (C-D percentage), and measured the distance between the PIP and the anterior joint line (E-length), and medial tibial-femoral joint space (F-length). In Group 3, the AM portal was made at the PIP level and clinical usefulness of the approach to the MMPH and body of the lateral meniscus (LM) was analyzed. Results: The average C-D percentage came out as 85.8, 101.3, 69.1% for each Group 1-A, B, C, and 102.4, 144.6, 116.8% for each Group 2-A, B, C. Measured E-length was an average of 15.1 (Group 1-A), 15.5 (Group 1-B, C), 13.1 (Group 2-A), and 12.9 mm (Group 2-B, C) and the change by valgus stress had no statistical significance. The F-length increased about 1.2 (Group 1) and 3.6 mm (Group 2) when valgus stress was applied, which had statistical significance (p<0.001, p<0.001). In Group 3, 49, 48 knees were classified as good for the MMPH, and the body of LM in aspect of the clinical usefulness of AM portal made on the PIP level. Conclusion: We identified the clinical usefulness of the PIP as a skin landmark of AM portal for the arthroscopic surgery of the MMPH.