• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.317-325
• /
• 2020

UAV (Unmanned Aerial Vehicle) photogrammetry has recently emerged as a means of obtaining highly precise and rapid spatial information due to its cost-effectiveness and high efficiency. However, current procedures or regulations for quantitative quality verification methods and certification processes for UAV-images are insufficient. In addition, the current verification method for image quality is not evaluated by an MTF (Modulation Transfer Function) analysis or edge response analysis, which can analyze the degree of contrast including image resolution, and only relies on the GSD (Ground Sample Distance) analysis. Therefore, in this study, the edge response analysis using a Slanted edge target was performed along with GSD analysis to confirm the necessity of analyzing edge response analysis in UAV-images quality analysis. Furthermore, a Matlab GUI-based software tool was developed to help streamline the edge response analysis. As a result, we confirmed the need for edge response analysis since the outputs of the edge response analysis from the same GSD had significantly different outcomes. Additionally, we found that the quality of the edge response analysis of UAV-images is proportional to the performance of the camera mounted on the UAV.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.4
• /
• pp.277-286
• /
• 2012

In the numerical simulation of wave fields using a multi-phase flow model that considers simultaneous flows of materials with different states such as gas, liquid and solid, there is need of an accurate representation of the interface separating the fluids. We adopted an algebraic interface capturing method called tangent of hyperbola for interface-capturing(THINC) method for the capture of the free-surface in computations of multi-phase flow simulations instead of geometrical-type methods such a volume of fluid(VOF) method. The THINC method uses a hyperbolic tangent functions to represent the surface, and compute the numerical flux for the fluid fraction functions. One of the remarkable advantages of THINC method is its easy applicability to incorporate various numerical codes based on Navier-Stokes solver because it does not require the extra geometric reconstruction needed in most of VOF-type methods. Several tests were carried out in order to investigate the advection of interfaces and to verify the applicability of the THINC method to wave fields based on the one-field model for immiscible two-phase flows (TWOPM). The numerical results revealed that the THINC method is able to track the interface between air and water separating the fluids although its algorithm is fairly simple.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1138-1149
• /
• 1993

A new mode synthesis method using Lagrange multipliers and substructure hybrid interface modes is presented. Substruture governing equations of motion are derived using Lagrange equations and the constraints of geometric compatibility between the substructures are treated with Lagrange multipliers. Fixed, free, and loaded interface modes can be employed for the modal bases of each substructure. In cases of the fixed and loaded interface modes, two successive modal transformation relations are used. Compared with the conventional mode synthesis methods, the suggested method does not construct the equations of motion of the coupled structure and the final characteristic equation becomes a polynomial. Only modal parameters of each substructure and geometric compatibility conditions are needed. The suggested method is applied to a simple lumped mass model and parametric study is performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1165-1172
• /
• 2009

The laminar boundary layer along a streamwise corner formed by two flat plates intersecting at right angle is measured by using Particle Image Velocimetry(PIV) technique. The free stream velocity ranges from 2.96m/s to 3.0m/s. The angle of incidence of the corner is set to 1.2 degree providing slightly favourable pressure gradient to ensure a laminar flow in the corner region. A round shape leading edge is used and the length of the model is about 1000mm. In the bisector plane, the measurement data show separation type velocity profiles having an inflection point which is a typical characteristic of laminar corner boundary layers. As the distance away from the bisector plane increases, velocity profiles are found to change into the Blasius profile. The change completes around half length of the boundary layer thickness in the bisector plane away from the bisector plane along the plate. In the bisector plane, the growth characteristic of the boundary layer thickness and the approximate similarity of velocity profiles are confirmed from the measurement data.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.50-52
• /
• 2006

본 논문은 고성능 다결정 실리콘(Poly-Si) 박막 트랜지스터 (Thin Film Transistor)에서 단일 수직 그레인 경계(Single Perpendlcular Grain Boundary)가 고온 캐리어 스트레스(Hot Carrier Stress) 및 정전류 안정성 평가에서 어떠한 효과를 보이는가에 대해서 살펴보았다. 고온 캐리어 스트레스 하에서($V_G=V_{TH}+1V,\;V_D$ =12V),그레이 경계가 없는 다결정 실리콘 TFT와 비교했을 때 그레인 경계를 가지고 있는 다결정 실리를 TFT는 전기 전도(Electric Conduction)에 작용하는 자유 캐리어(Free Carrier)의 개수가 적기 때문에 상대적으로 더욱 우수한 전기적 특성을 나타낸다. 먼저 1000초 동안 고온 캐리어 스트레스를 가해준 결과 단일 그레인 경계를 가진 다결정 실리콘에서의 트랜스 컨덕턴스(Transconductance)의 이동 정도는 5% 미만으로 확인되었다. 반면에 같은 스트레스 조건 하에서 그레인 경계가 존재하지 않는 다결정 실리콘의 경우에는 그 이동 정도가 약 25%에 달하는 것으로 측정되었다. 다음으로 정전류 스트레스(Constant Current Stress) 인가시, 수직형 그레인 경계가 채널 영역 내에 존재하지 않는 다결정 실리콘 TFT는 드레인 접합 부분의 전계 세기를 비교했을 때, 그레인 경계를 가지고 있는 다결정 실리콘 TFT보다 상대적으로 낮은 원 인 때문에 적게 열화되는(Degraded) 특성을 확인할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.262-270
• /
• 1987

A numerical method is presented which can solve the unsteady momentum and thermal boundary layers, coupled through the agency of buoyancy force, over a heated circular cylinder impulsively started from rest. By linearizing the nonlinear finite difference equations without sacrificing accuracy, numerical solutions are obtained at each time step without iteration. To get rid of the requirement of excessive number of grid points in the region of reversed flow, special form of transformed variables are used, by which the computational boundary layer thickness is maintained almost constant. These numerical properties enable the method to easily handle the region of reversed flow and how the singularity develops in the interior of the boundary layer. In order to investigated the thermal effects on the skin friction, heat flux, displacement thickness and on the separation, we have successfully solved three different cases of the buoyancy parameter .alpha.(Gr/Re$^{2}$).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.15-28
• /
• 2023

Boundary Station is an evaluation index that was not reflected in the Seoul Metropolitan Urban Railroad Connected Eare Allocation. Boundary station is a station located at the boundary point of two transportation agencies sharing the same route, and track operation methods are divided into business management and maintenance management. Until now, the Connected Fare Allocation has evaluated the boundary stations from the perspective of business management. Meanwhile, the integrated public transportation fee system requires the need to interpret the boundary stations from the point of view of maintenance management at the developmental level. This study was prepared a measure to quantitatively analyze changes in income with the introduction of maintenance methods in mind. The Change in the income of operation agency evaluated based on the daily transportation card data for the boundary stations of the four Seoul Transportation Corporation and KORAIL sections. This study is meaningful as a basic research for an analytical judgment that evaluates and allocates changes in transportation income of Seoul Metropolitan Urban Railroad in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.961-968
• /
• 2006

Curbs and L-type gutters installed at the edge of a road are very important structures to protect pedestrians from traffic accidents and to restraint slip of cars due to rain. However, existing construction method where great parts of the construction progress are done by human power has many problems in workability, quality and cost etc. In this paper, a new construction method for improvement in workability and quality for curbs and L-type gutters is developed. In order to investigate the structural safety and quality of curbs and gutters installed by the new method, tensile and lateral load tests are performed on curbs installed by existing and new methods and uniaxial compression tests are also performed on concrete samples of gutters constructed by existing and new methods. The test results show that the alignment of curbs and the strength of gutter concrete are very much improved by applying the new method. The tensile and lateral load capacities of the curbs installed by the new method are 10.7 and 2.5 times higher than those of curbs by existing method, respectively.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.387-392
• /
• 2005

최근에는 LiDAR 시스템의 등장으로 기존의 항공사진측량에 비하여 효율적이고, 경제적으로 도시지역의 수치표고자료를 효과적으로 구축할 수 있게 되었으나, 도시지역에서는 다양한 형태의 객체들이 모두 포함된 DSM(Digital Surface Model) 형식의 자료를 취득하게 된다. 따라서, 홍수범람예측에 있어서의 인공지물의 영향 해석 등을 위하여 건물이 제거된 지형에 관한 상세한 정보를 제공하기 위해서는 DSM으로부터 DEM(Digital Elevation Model)을 추출하기 위한 전처리 과정이 필요하다. 본 연구는 LiOAR 시스템으로부터 취득된 도시지역에 대한 DSM으로부터 건물 등이 제거된 DEM을 추출하기 위한 연구로서 영상처리기법의 경계검출 알고리즘을 적용하여 건물 등의 지물들에 대한 경계를 추출하였으며, 선행연구에서 건물로 추출된 지역에 대하여 보간법을 적용함으로써 발생하는 원시 DSM 자료의 변형에 따른 대안으로써, 추출된 경계에 대여 평균값 필터링, 중간 값 필터링, 최소 값 필터링을 각각 적용함으로써 원시 DSM 자료의 변형을 최소화하여 건물 등의 지물들을 제거하였으며, LiDAR DSM으로부터 DEM을 제작하는 과정을 간략화, 자동화하였다.

• Computational Structural Engineering
• /
• v.9 no.4
• /
• pp.165-172
• /
• 1996

For thin elastic structures such as beams, arches, plates and shells, there may exist the boundary layer in the narrow thin region neighborhood of boundaries, where the solution displays the singular behavior exponentially decaying in the normal direction to the boundary. In the finite element analysis of these structures, finite element mesh patterns have a significant role to capture this singularity. This paper introduces the analytic study of this problem and provides a guideline to construct optimal mesh patterns together with numerical experiments.