• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1368-1372
• /
• 2007

바닥이 언덕과 저면으로 이루어진 연속적인 횡방향 바닥형상을 갖는 개수로 흐름의 부유사 농도분포를 수치모의 하였다. 비선형 ${\kappa}-{\varepsilon}$ 모형을 이용하여 흐름의 지배방정식인 곡선 직교좌표계에 대한 Navier-Stokes 방정식을 해석하였으며, 와점성계수 개념을 이용하여 부유사 수송 방정식을 해석하였다. 기존의 실험결과와 비교하여 모형이 격자형 이차흐름을 비교적 잘 예측하는 것을 확인하였으며, 동일한 흐름에 대하여 부유사 농도 분포를 계산하였다. 부유사량의 계산 결과 언덕 위의 부유사 농도분포가 저면 위의 농도분포보다 크게 나타났다.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.165-171
• /
• 1992

진동하는 구조물을 설계할 때에는 그 구조물 중의 Strain이나 응력이 최대가 되는 장소나 시각을 알 필요가 있다. 지금까지의 Strain 해석에는 Strain gauge 등과 같은 접촉법이 많이 이용되고 있다. 더우기, 접촉법으로 대변형 진동을 하는 물체의 Strain을 해석하는 것은 곤란하다. 최근에는 비접촉법으로 Strain 분포를 해석하기 위해 화상처리를 이용한 계측이 행하여지고 있다. 이들의 Strain 분포를 측정하는 광학적인 방법으로는 격자법, Moire법, 홀로 그랩픽 간섭법 등이 있다. 특히 대변형이나 대Strain을 해석하는 데에는 격자법이 많이 이용되고 있는데, 종래의 격자법은 Data를 처리하는 데에 많은 시간과 노력이 소요되고 작업도 매우 복잡하며, Data의 수도 제한이 되어서 구조물의 분포의 해석 정도에 큰 영향을 미치게 된다. 본 논문 에서는 스테레오법을 이용해서 2차원 격자를 붙인 시료표면의 각 점의 3차원 좌표를 계측하고, 또 Fourier 변환 격자법을 적용하여 촬영된 2차원 격자의 화상에서 위상치를 구한다. 그리고 물체의 변형 전후의 대응 관계의 화상에서 3차원 형상과 Strain 분포를 해석하는 방법을 제안한다. 이 방법을 이용하면 진동하는 구조 물의 3차원 변위분포, Strain 분포를 정도 좋게 해석할 수가 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1158-1174
• /
• 1988

A numerical technique is developed for the solution of fully developed turbulent recirculating flow in the passage of variable area using the non-orthogonal coordinate transformation. In the numerical analysis, primitive pressure-velocity finite difference equations were solved by SIMPLER algorithm with 2-equation turbulence model and algebraic stress model (ASM). QUICK scheme on the differencing of convective terms which is free from the inaccuracies of numerical diffusion has been applied to the variable grids and the results compared with those from HYBRID scheme. In order to test the effect of streamline curvatures on turbulent diffusion Lee and Choi streamline curvature correction model which has been obtained by modifying the Leschziner and Rodi's model is testes. The ASM was also employed and the results are compared to those from another turbulence model. The results show that difference of convective differencing schemes and turbulence models give significant differences in the prediction of velocity fields in the expansion region and outlet region of the combustor, however show little differences in the parallel flow region.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.655-659
• /
• 2008

본 연구에서는 3차원 수치모의를 통하여 횡방향 하상형상 및 격자형 이차흐름 구조의 생성 메커니즘을 분석하였다. 이를 위해 곡선좌표계에서의 지배방정식을 구성하고, 난류 폐합을 위해 Speziale(1987)가 제안한 비등방성 k-$\varepsilon$모형을 이용하였다. 또한 Exner 방정식을 이용하여 시간에 따른 하상변동을 예측하였다. 그 결과 바닥과 측벽 사이에서 발생되는 바닥 이차흐름의 하향류에 의해 측벽 부근부터 하상이 침식되고, 침식된 유사량은 이차흐름의 횡방향 유속에 의해 이동되어 퇴적되어, 결국 횡방향으로 연속적인 언덕 및 저면과 같인 하상형상이 생성되는 것으로 나타났다. 또한 시간에 따른 이차흐름 및 바닥 전단력, 하상고의 변화에 대해 살펴보았다.

• Journal of computational fluids engineering
• /
• v.3 no.1
• /
• pp.89-99
• /
• 1998

한국형 차세대원자로에서는 비상노심 안전주입수가 저온관을 통하지 않고 원자로용기에 직접 주입된다. 원자로용기의 가압열충격과 열수력적 관점에서 최적의 노즐위치를 결정하기 위해서 전산유체역학을 활용하였다. 상용 전산유체코드인 CFX를 이용하여 원자로 하향유로를 모사하는 해석대상 격자를 다중불록으로 형성한 다음 유동장을 비압축성 Navier-Stokes 운동량 방정식, 에너지 방정식과 표준 k-ε 난류모형 등으로 모형화하여 3차원 비정상상태 계산을 수행하였다. CFX에서는 경계 밀착좌표계, 비엇물림격자와 SIMPLE 알고리즘을 사용한다. 본 연구결과 원자로용기의 가압열충격 관점에서 가장 보수적인 사고인 증기관 파단사고시에도 열적혼합이 잘 일어나 가압열충격이 발생할 가능성이 없는 것으로 판단되며 안전주입수 노즐이 저온관 바로 위에 위치할 때 원자로 하향유로 내의 온도 분포가 가장 균일하여 열적 혼합 관점에서는 최적의 위치로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.262-270
• /
• 1987

A numerical method is presented which can solve the unsteady momentum and thermal boundary layers, coupled through the agency of buoyancy force, over a heated circular cylinder impulsively started from rest. By linearizing the nonlinear finite difference equations without sacrificing accuracy, numerical solutions are obtained at each time step without iteration. To get rid of the requirement of excessive number of grid points in the region of reversed flow, special form of transformed variables are used, by which the computational boundary layer thickness is maintained almost constant. These numerical properties enable the method to easily handle the region of reversed flow and how the singularity develops in the interior of the boundary layer. In order to investigated the thermal effects on the skin friction, heat flux, displacement thickness and on the separation, we have successfully solved three different cases of the buoyancy parameter .alpha.(Gr/Re$^{2}$).

• Water for future
• /
• v.23 no.3
• /
• pp.319-328
• /
• 1990

The Parameter Identification of 2-demensional estuarine model was carried out using new output ADI-FDM numerical semi-implicit schem transformed in boundary fitted(BF) - coordinate. The hydrodynamic equations which is coupled with the transport equations were used as basic equations in the model. Thompson's equations were used to transform governing equations into rectangular plane equations and his elliptic grid generation scheme was used to generate curvilinear grid system. in BF - coordinates. The parameters to be identified are friction coefficient and disperse coefficient embedded in the governing equations. The numerical output scheme is tidally averaged salinity model in BF - coordinates. The algorithm to optimize norm of error between observations and calculations is the influence coefficinet algorithm associated with least square criterion. The lumped model is conssidered in identification. This paper was concetrated on checking whether the new output scheme might be useful to identify parameters in estuarine salinity model or not. The proposed method was tested through experimental application with hypothetical simple model. The result of the test shows that the proposed method can be used for parameter identification in estuarine model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2072-2078
• /
• 2011

In photovoltaic(PV) system, for obtaining maximum efficiency of solar power systems, the solar tracking system must be controlled to match position of the sun. In this paper, we design the solar tracking system to track movement of the sun using CdS sensor modules and to determine direction of the sun under shadow of directions. In addition, for an intelligent computation in tracking of the sun, a fuzzy controller is allocated to space avaliable for splitting area of fuzzy part for the fuzzy input space(grid-type fuzzy partition) in which a fuzzy grid partition divides fuzzy rules bases. As well, a simple model of solar tracking system is designed by two-axis motor control systems and the 8-direction sensor module that can measure shadow from CdS sensor modules by matching of axis of CdS modules and PV panels. We demonstrate this systems is effective for fixed location and moving vessels and our fuzzy controller can track the satisfactorily.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.151-157
• /
• 2013

The law for indicating the address based on the street name has taken effect in 1997. The address based on land-lot number will be changed to the address based on the street name giving odd numbers to the buildings situated on the left side and even numbers to the buildings situated on the right side per street. Searching locations by street name addresses is possible for residential areas, on the other hand, the system of finding locations is insufficient for farmlands, mountains and others, so it is unable to cope with crimes and emergency rescue. In order to make up for the weak points of street name address, the national point number, grid reference system was introduced for finding location of non-residential areas. Therefore, the purpose of this paper is to help the introduction the national point number. In this paper, we proposed a territory-oriented control point and grid range for the national point number. Numbering scheme of grid zone shall be alphanumeric, a two-letter pair Hangul and the grid coordinates in terms of Easting and Northing. We also proposed the notice area for the national point number and location of signs, application about the public and private sector.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1833-1839
• /
• 2014

In this paper, a systematic demapping algorithm for three-dimensional (3-D) lattice signal constellations is presented. The algorithm consists of decision of an octant, computation of a distance from the origin, and determination of the coordinates of a symbol. Since the algorithm can be extended systematically, it is applicable to the larger lattice constellations. To verify the algorithm, 3-D signal transmission systems with field programmable gate array (FPGA) and $Matlab^{(R)}$ are implemented. And they are exploited to carry out computer simulation. As a result, both hardware and software based systems produce almost the same symbol error rates (SERs) in an additive white Gaussian noise (AWGN) environment. In addition, the hardware based system implemented with an FPGA generates waveforms of 3-D signals and recovers the original binary sequences perfectly. Those results confirm that the algorithm and the implemented 3-D transmission system operate correctly.