• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.370-378
• /
• 2017

A fluid model of 2D axis-symmetry based on inductively coupled plasma (ICP) reactor using $N_2/NH_3/SiH_4$ gas mixture has been developed for hydrogenated silicon nitride ($SiN_x:H$) deposition. The model was comprised of 62 species (electron, neutral, ions, and excitation species), 218 chemical reactions, and 45 surface reactions. The pressure (10~40 mTorr) and gas mixture ratio ($N_2$ 80~96 %, $NH_3$ 2~10 %, $SiH_4$ 2~10 %) were considered simulation variables and the input power fixed at 1000 W. Different distributions of electron, ions, and molecules density were observed with pressure. Although ionization rate of $SiH_2{^+}$ is higher than $SiH_3{^+}$ by electron direct reaction with $SiH_4$, the number density of $SiH_3{^+}$ is higher than $SiH_2{^+}$ in over 30 mTorr. Also, number density of $NH^+$ and $NH_4{^+}$ dramatically increased by pressure increase because these species are dominantly generated by gas phase reactions. The change of gas mixture ratio not affected electron density and temperature. With $NH_3$ and $SiH_4$ gases ratio increased, $SiH_x$ and $NH_x$ (except $NH^+$ and $NH_4{^+}$) ions and molecules are linearly increased. Number density of amino-silane molecules ($SiH_x(NH_2)_y$) were detected higher in conditions of high $SiH_x$ and $NH_x$ molecules density.

• Journal of the Korean Vacuum Society
• /
• v.2 no.3
• /
• pp.360-367
• /
• 1993

텅스텐 박막 증착의 메카니즘을 밝히기 위하여 먼저 SiH4와 WF6의 열분해 반응에 관한 열역학적 결과들과 표면 촉매 반응에 대한 이론적인 결과들을 고찰하였다. 실험적으론 저압 화학기상 증착법을 이용하여 WF6를 SiH4로 환원시켜 텅스텐 박막을 Si(100) 기판위에 증착하였으며 증착반응 중의 기판 표면의 변화를 in-situ로 측정하였다. 증착 메카니즘을 밝히기 위하여 반응기체를 WF6, SiH4, WF6＋SiH4, WF6$\longrightarrow$SiH4$\longrightarrow$WF6＋SiH4로 달리하여 반응시켰으며 그 때의 박막 특성과 표면 및 단면 형상을 측정하였다. 이론적인 고찰과 실험적인 결과들로부터 텅스텐 박막은 먼저 Si 기판에 의한 WF6의 환원반응으로 인한 증착과 이어서 SiH4에 의한 WF6의 환원으로 증착됨을 밝혔다.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.916-921
• /
• 2018

In this paper, we analyzed the power MOSFET devices for high voltage and high current operation. 4H-SiC was used instead of Si to improve the static characteristics of the device. Since 4H-SiC has a high critical electric field due to wide band gap, 4H-SiC is more advantageous than Si in high voltage and high current operation. In the conventional VDMOSFET structure using 4H-SiC, the breakdown voltage is limited due to the electric field crowding at the edge of the p-base region. Therefore, in this paper, we propose a Curvature VDMOSFET structure that improves the breakdown voltage and the static characteristics by reducing the electric field crowding by giving curvature to the edge of the p-base region. The static characteristics of conventional VDMOSFET and curvature VDMOSFET are compared and analyzed through TCAD simulation. The Curvature VDMOSFET has a breakdown voltage of 68.6% higher than that of the conventional structure without increasing on-resistance.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1336-1336
• /
• 1998

A twt -step carbothermal reduction scheme has been employed for the synthesis of SiC whiskers in an Ar or a H2 atmosphere via vapor-solid two-stage and vapor-liquid-solid growth mechanism respectively. It has been shown that the whisker growth proceed through the following reaction mechanism in an Ar at-mosphere : SiO2(S)+C(s)-SiO(v)+CO(v) SiO(v)3CO(v)=SiC(s)whisker+2CO2(v) 2C(s)+2CO2(v)=4CO(v) the third reaction appears to be the rate-controlling reaction since the overall reaction rates are dominated by the carbon which is participated in this reaction. The whisker growth proceeded through the following reaction mechaism in a H2 atmosphere : SiO2(s)+C(s)=SiO(v)+CO(v) 2C(s)+4H2(v)=2CH4(v) SiO(v)+2CH4(v)=SiC(s)whisker+CO(v)+4H2(v) The first reaction appears to be the rate-controlling reaction since the overall reaction rates are enhanced byincreasing the SiO vapor generation rate.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1202-1205
• /
• 2018

In this paper, we proposed ggNMOS based on 4H-SiC material and analyzed its electrical characteristics. 4H-SiC is a wide band-gap meterial, which is superior in area contrast and high voltage characteristics to Si material, and is attracting attention in the power semiconductor field. The proposed device has high robustness and strong snapback characteristics. The process consisted of SiC process and electrical characteristics were analyzed by TLP measurement equipment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.441-445
• /
• 2013

ZnO nanowires on the a-, c- and m-plane oriented 4H-SiC substrates were grown by using a high temperature tube furnace. Ti/Au electrodes were deposited on ZnO nanowires and a-, c- and m-plane 4H-SiC substrates, respectively. The shape and density of the ZnO nanowires were investigated by field emission scanning electron microscope. It was found that the growth direction of nanowires depends strongly on growth parameters such as growth temperature and pressure. In this work, The sensitivity of nanowires formed a-, c- and m-plane oriented 4H-SiC gas sensor was measured at $300^{\circ}C$ with CO gas concentration of 80%. The nanowires grown on a-plane oriented 4H-SiC show improved sensing performance than those on c- and m-plane oriented 4H-SiC due to the increased density of nanowire on a-plane 4H-SiC.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1037-1041
• /
• 2001

Silicon diosixde thick film using silica optical waveguide cladding was fabricated by Plasma Enhanced Chemical Vapor Deposition (PECVD) method, at a low temperature (32$0^{\circ}C$) and from (SiH$_4$+$N_2$O) gas mixtures. The effects of deposition parameters on properties of SiO$_2$thick films were investigated by variation of $N_2$O/SiH$_4$flow ratio and RF power. As the $N_2$O/SiH$_4$flow ratio decreased, deposition rate increased from 2.9${\mu}{\textrm}{m}$/h to maximum 10.1${\mu}{\textrm}{m}$/h. As the RF power increased from 60 W to 120 W, deposition rate increased (5.2~6.7 ${\mu}{\textrm}{m}$/h) and refractive index approached at thermally grown silicon dioxide (n=1.46).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.121-122
• /
• 2011

광도파로 기반 센서의 성능을 개선시키기 위해서는 코어와 클래딩 층의 굴절률 차를 크게 하여 표면감도를 향상시켜야 한다. 이를 위해 센서용 광도파로 코어 층을 위한 고굴절률 SiNx 박막을 플라즈마 화학기상증착(PECVD, plasma enhanced chemical vapor deposition)법을 이용하여 성장한 후 그 표면특성을 분석하였다. 이 때 플라즈마 화학기상증착 공정 조건 중 NH3 가스를 제외하여 Si 성분이 많은 고굴절률 SiNx 박막의 성장을 유도하고 He/SiH4 가스유량비를 0에서 100까지 변화시켜 SiNx 박막의 표면거칠기를 제어하였다. Si기판 위에 SiNx 박막을 10분 성장 후 BOE(buffered oxide etchant)로 선택식각하여 그 박막두께를 alpha step으로 측정하는 방법으로 He/SiH4 가스유량비 조건별 박막성장률을 계산하였다. 그 결과 He/SiH4 가스유량비 증가함에 따라 박막성장률이 33 nm/min에서 19 nm/min으로 선형적인 감소함을 알 수 있었다. 박막두께가 190 nm가 되도록 He/SiH4 가스유량비 조건별 SiNx 박막을 성장한 후 그 표면특성을 AFM (atomic force microscope)으로 관찰하였다. 이를 통해 He/SiH4 가스유량비가 50일 때 SiNx 박막의 표면거칠기가 최소가 됨을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.28-30
• /
• 2009

이종접합태양전지에서 p a-Si:H/c-Si의 p a-Si:H의 증착 조건인 $H_2/SiH_4$ 비율, $B_2H_6$의 농도를 변화 시키며 실험하여 이 따라 계면 특성 변화를 연구하였다. pa-Si:H의 $H_2/SiH_4$ 비율이 상승할수록 carrier lifetime이 증가하다 다시 감소하는 경향을 나타내었다. 이는 $H_2/SiH_4$의 비율 중 효과적으로 웨이퍼표면을 효과적으로 passivation하는 지점이 있는 것으로 보인다. $B_2H_6$의 농도는 상승할수록 carrier lifetime이 줄어드는 경향을 보였다. $B_2H_6$에서 농도가 올라감에 웨이퍼 표면의 defect로 작용했을 것으로 생각된다. 이에서 몇몇의 조건으로 태양전지를 제작한 결과 $H_2/SiH_4$ 비율에 따라서는 carrier lifetime은 효율에 그 영향이 미미한 것으로 조사되었고, $B_2H_6$의 농도가 낮을수록 개방전압은 상승하는 결과를 얻어 도핑 농도가 효율에 직접적인 형향을 주는 것으로 나타났다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.1
• /
• pp.1-4
• /
• 2003

The SiH$_4$soak step is widely used to prevent the WF$_{6}$ attack to the underlayer metal using the chemical vapor deposition (CVD) method. Reduction or skipping of the SiH$_4$soak process time if lead to optimizing W-plug deposition process on via. The electrical characteristics including via resistance and the structure of W-film are affected by the time of SiH$_4$soak process. The possibility of elimination of SiH$_4$soak process is confirmed In the case of W- film grown on the stable Ti/TiN underlayer.