• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.40-45
• /
• 2015

Electrode systems: a protrusion on conductor (POC), a protrusion on enclosure (POE), a crack in epoxy plate and a free particle (FP) were fabricated to simulate insulation defects in a gas insulated switchgear (GIS). $SF_6$ gas was filled in the electrode systems by 3 bar and/or 5 bar, respectively. Partial discharge (PD) pulses were detected through a $50{\Omega}$ non-inductive resistor. A calibration test was carried out according to IEC 60270, and the sensitivity was 0.25 pC/mV. PD pulses were distributed in the phase of $50^{\circ}{\sim}135^{\circ}$ and over 95% of them existed in the phase of $55^{\circ}{\sim}120^{\circ}$ for the POC. PD pulses were distributed in the phase of $230^{\circ}{\sim}310^{\circ}$ and over 90% of them existed in phase of $220^{\circ}{\sim}300^{\circ}$ for the POE. PD pulses occurred in the phase of $40^{\circ}{\sim}60^{\circ}$ and $220^{\circ}{\sim}300^{\circ}$ for the crack, and pulse counts were 25% higher in negative polarity than in positive polarity. PD pulses were distributed in every phase unlike to other three electrode systems and the peak magnitude was measured at $118^{\circ}$ and $260^{\circ}$ for the FP. As described above, PD pulses were observed in positive polarity for the POC, in negative one for the POE, in both one for the crack and the FP. In conclusion, it is expected that the identification rate of defect type can be improved by considering the polarity ratio of PD pulses on the PRPDA method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.798-802
• /
• 1999

This study was performed to compare the effect of enrichement of rotifer and Artemia fed marine bacteria (Erythrobacter sp. S$\pi$-1) with those fed the different diets-(Super Selco, $\omega$-yeast and marine Chlorella) on the slime flounder larvae, Microstomus achne. Because the ratio of docosahexaenoic acid (DHA) to fatty acids in rotifer (dry weight $\%$) fed on Super Selco and ESP-SR including Erythrobacter sp. S$\pi$-1 was higher than that in rotifer fed marine Chlorella, the growth of the slime larvae fed the former showed better than the latter. And the ratio of DHA and highly unsaturated fatty acid (n-3 HUFA) to fatty acids in Artemia (dry weight $\%$) enriched by ESP-A including Erythrobacter sp. S$\pi$-1 were also higher than those in Artemia enriched by others or Artemia without enrichment. Larvae fed on Artemia enriched by ESP-A showed better growth and survival rate than those fed on Artemia enriched by others or Artemia without enrichment. With regard to dietary value of Erythrobacter sp. S$\pi$-1, its use could improve the quality of the live foods for the slime flounder larvae.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.537-541
• /
• 2003

The a-Si:H TFTs using ferroelectric of SrTiO$_3$, as a gate insulator is fabricated on glass. Dielectric characteristics of ferroelectric is better than SiO$_2$, SiN. Ferroelectric increases ON-current, decreases threshold voltage of TFT and also breakdown characteristics. The a-Si:H deposited by PECVD shows absorption band peaks at wavenumber 2,000 $cm^{-1}$ /, 635 $cm^{-1}$ / and 876 $cm^{-1}$ / according to FTIR measurement. Wavenumber 2,000 $cm^{-1}$ /, 635 $cm^{-1}$ / are caused by stretching and rocking mode SiH1. The wavenumber of weaker band, 876 $cm^{-1}$ / is due to SiH$_2$ vibration mode. The a-SiN:H has optical bandgap of 2.61 eV, refractive index of 1.8 - 2.0 and resistivity of 10$^{11}$ - 10$^{15}$ aim respectively. Insulating characteristics of ferroelectric is excellent because dielectric constant of ferroelectric is about 60 - 100 and breakdown strength is over 1 MV/cm. TFT using ferroelectric has channel length of 8 - 20 $\mu$m and channel width of 80 - 200 $\mu$m. And it shows drain current of 3 $\mu$A at 20 gate voltages, Ion/Ioff ratio of 10$^{5}$ - 10$^{6}$ and Vth of 4 - 5 volts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.377-377
• /
• 2012

Microprocessor technology now relies on copper for most of its electrical interconnections. Because of the high diffusivity of copper, Atomic layer deposition (ALD) $TaN_x$ is used as a diffusion barrier to prevent copper diffusion into the Si or $SiO_2$. Another problem with copper is that it has weak adhesion to most materials. Strong adhesion to copper is an essential characteristic for the new barrier layer because copper films prepared by electroplating peel off easily in the damascene process. Thus adhesion-enhancing layer of cobalt is placed between the $TaN_x$ and the copper. Because, cobalt has strong adhesion to the copper layer and possible seedless electro-plating of copper. Until now, metal film has generally been deposited by physical vapor deposition. However, one draw-back of this method is poor step coverage in applications of ultralarge-scale integration metallization technology. Metal organic chemical vapor deposition (MOCVD) is a good approach to address this problem. In addition, the MOCVD method has several advantages, such as conformal coverage, uniform deposition over large substrate areas and less substrate damage. For this reasons, cobalt films have been studied using MOCVD and various metal-organic precursors. In this study, we used $C_{12}H_{10}O_6(Co)_2$ (dicobalt hexacarbonyl tert-butylacetylene, CCTBA) as a cobalt precursor because of its high vapor pressure and volatility, a liquid state and its excellent thermal stability under normal conditions. Furthermore, the cobalt film was also deposited at various $H_2/NH_3$ gas ratio(1, 1:1,2,6,8) producing pure cobalt thin films with excellent conformality. Compared to MOCVD cobalt using $H_2$ gas as a reactant, the cobalt thin film deposited by MOCVD using $H_2$ with $NH_3$ showed a low roughness, a low resistivity, and a low carbon impurity. It was found that Co/$TaN_x$ film can achieve a low resistivity of $90{\mu}{\Omega}-cm$, a low root-mean-square roughness of 0.97 nm at a growth temperature of $150^{\circ}C$ and a low carbon impurity of 4~6% carbon concentration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.347-355
• /
• 1986

The Sonakdong river is very important water source not only for agricultural water of Kimhae field but also for fishery water. Recently the middle and lower areas of the river have the tendency to be heavily contaminated by domestic sewage and agricultural chemicals. Fifty six water samples were collected from 8 stations from July to December in 1985 for the experiment (Fig. 1). To evaluate the water quality, pH, water temperature, electrical conductivity, chloride ion, nutrients ($NO^{-}_{2}-N,\;NO^{-}_{3}-N,\;NH^{+}_{4}-N,\;PO^{3-}_{4}-P,\;SiO_2-Si$), total coliform, fecal coliform, and fecal streptococcus were determined. Range and mean value of the samples were as follows; pH $6.3{\sim}9.4$, 7.91; water temperature $6.1{\sim}34.8^{\circ}C,\;23.88^{\circ}C$; electrical conductivity (from St. A to G) $1.575{\times}10^2{\sim}30.50{\times}10^2{\mu}{\mho}/cm,\;6.57{\times}10^2{\mu}{\mho}/cm$; chloride ion $23.5{\sim}14,300mg/l$, 770.0mg/l; nitrite-nitrogen $0.007{\sim}0.110mg/l$, 0.053mg/l; nitrate-nitrogen $0.001{\sim}1.638mg/l$, 0.649 mg/l; ammonia-nitrogen $0.017{\sim}4.200mg/l$, 0.497mg/l; phosphate-phoshorus $0.011{\sim}0.281mg/l$, 0.086mg/l; and silicate-silicious $2.4{\sim}6.5mg/l$, 4.43mg/l. Electrical conductivity and chloride ion of the station F(Chomanpo) were $2.676{\times}10^2{\mu}{\Omega}cm$ and 123.99mg/l which were lower than those of others. Among the analyzed nutrients, silicate-silicious concentration was the highest through all the samples. The bacterial density of the samples ranged $36{\sim}110,000/100ml$ for total coliform, $15{\sim}46,000/100ml$ for fecal coliform and $3.6{\sim}15,000/100ml$ for fecal streptococcus. The range and the mean of the TC/FC ratio were $3.0{\sim}9.6$, 5.51 and those of the FC/FS ratio were $1.1{\sim}9.2$, 6.19, respectively. On the other hand, fecal coliform was not detected in about $78\%$ of the water samples examined. Composition of coliform was $52\%$ Escherichia coli group, $3\%$ Citrobacter freundii group, $13\%$ Enterobacter aerogenes group and $31\%$ others.

• Korean Journal of Community Nutrition
• /
• v.2 no.4
• /
• pp.477-485
• /
• 1997

This study was conducted to determine the effect of large amounts of whole cow's milk intake on serum levels of minerals and lipids. Subjects were normal infants who were brought to the pediatric hospital for vaccination at the age of 7-26 months after birth, living in Eumsung-Choongbuk area. The serum concentrations of the imnerals(calcium, phosphorus, magnesium, iron, zinc and copper), lipids and fatty acids composition were analyzed in 38 infants which consumed large amount of whole cow's milk(over 700ml/day). The results obtained are summarized as follows : 1) The mean levels of calcium, phosphorus and magnesium in the serum of the total subjects were 7.56$\pm$0.51mg/dl, 11.12$\pm$0.72mg/dl and 1.62$\pm$0.13mg/dl respectively. The serum concentrations of iron, zinc and copper in total subjects averaged 72.42$\pm$1.62$\mu\textrm{g}$/dl, 76.29$\pm$3. 62$\mu\textrm{g}$/dl and 86.44$\pm$2.98$\mu\textrm{g}$/dl respectively. 2) The mean serum concentrations of triglyceride, total cholesterol, HDL and LDL in the total number of subjects were 96.84$\pm$9.22mg/dl, 133.45$\pm$6.30mg/dl, 32.79$\pm$1.77mg/dl and 81.29$\pm$4.81mg/dl respectively. 3) The average percentages of SFA, MUFA and PUFA inth total serum fatty acids were 38.98$\pm$2.42$\%$, 25.82$\pm$0.98$\%$ and 37.30$\pm$1.09$\%$ respectively and the mean$w6/w3$fatty acids ratio was 13.48. In general, the levels of serum minerals and $\omega$3 fatty acid composition in the subjects of this study, who were whole cow's milk fed infants were lower than those reported in breast milk or formula fed infants. Therefore, the intake of large amount of whole cow's milk in the weani ng period should be controlled and adequate for the infant's nutritional status. (Korean J Community 2(4) : 477-485, 1997)

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.467-473
• /
• 2010

The objective of this study is to prepare lead-free thick film resistor (TFR) paste compatible with AlN substrate for hybrid microelectronics. For this purpose, CaO-ZnO-$B_2O_3-Al_2O_3-SiO_2$ glass system was chosen as a sintering aid of $RuO_2$. The effects of the weight ratio of CaO to ZnO in glass composition, the glass content and the sintering temperature on the electrical properties of TFR were investigated. $RuO_2$ as a conductive and glass powder were dispersed in an organic binder to obtain printable paste and then thick-film was formed by screen printing, followed by sintering at the range between $750^{\circ}C$ and $900^{\circ}C$ for 10 min with a heating rate of $50^{\circ}C$/min in an ambient atmosphere. The addition of ZnO to glass composition and sintering at higher temperature resulted in increasing sheet resistance and decreasing temperature coefficient of resistance. Using $RuO_2$-based resistor paste containing 40 wt%glass of CaO-20.5%ZnO-25%$B_2O_3$-7%$Al_2O_3$-15%$SiO_2$ composition, it is possible to produce thick film resistor on AlN substrate with sheet resistance of $10.6\Omega/\spuare$ and the temperature coefficient of resistance of 702ppm/$^{\circ}C$ after sintering at $850^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.576-581
• /
• 2005

In this paper. the a-Si:H TFT using ferroelectric of $SrTiO_3$ as a gate insulator is fabricated on glass. High k gate dielectric is required for on-current, threshold voltage and breakdown characteristics of TFT Dielectric characteristics of ferroelectric are superior to $SiO_2$ and $Si_3N_4$. Ferroelectric increases on-current and decreases threshold voltage of TFT and also ran improve breakdown characteristics.$SrTiO_4$ thin film is deposited by e-beam evaporation. Deposited films are annealed for 1 hour in N2 ambient at $150^{\circ}C\~600^{\circ}C$. Dielectric constant of ferroelectric is about 60-100 and breakdown field is about IMV/cm. In this paper, the TFT using ferroelectric consisted of double layer gate insulator to minimize the leakage current. a-SiN:H, a-Si:H (n-type a-Si:H) are deposited onto $SrTiO_3$ film to make MFNS(Metal/ferroelectric/a-SiN:H/a-Si:H) by PECVD. In this paper, TFR using ferroelectric has channel length of$8~20{\mu}m$ and channel width of $80~200{\mu}m$. And it shows that drain current is $3.4{\mu}A$at 20 gate voltage, $I_{on}/I_{off}$ is a ratio of $10^5\~10^8,\;and\;V_{th}$ is$4\~5\;volts$, respectively. In the case of TFT without having ferroelectric, it indicates that the drain current is $1.5{\mu}A$ at 20gate voltage and $V_{th}$ is $5\~6$ volts. If properties of the ferroelectric thin film are improved, the performance of TFT using this ferroelectric thin film can be advanced.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.213-220
• /
• 2014

This study was conducted to evaluate the effects of high n-3 or n-6 diet on free fatty acid profile and meat quality traits of pork loin. The 20 heads of commercial $Landrace{\times}Yorkshire{\times}Duroc(LYD)$ crossbreed pigs ($90.9{\pm}2.4BWkg$) were divided into four groups by added fat and oils, such as 5% tallow (Control), 5% linseed oil (T1), 5% safflower oil (T2), and mixture of linseed oil (2.5%) + safflower oil (2.5%) (T3), then reared 4 weeks. Pork loins were taken after slaughter, then sliced in 2 cm thickness and put in low-density polyethylene (LDPE) bag for analysis. T1 showed significantly high concentration of linolenic acid ($2.35{\pm}0.21%$) (p<0.05). The total amount of saturated fatty acids (SFA), mono-unsaturated fatty acids (MUFA) and poly-unsaturated fatty acid (PUFA) was significantly high in T1 ($36.05{\pm}1.18%$), C ($22.60{\pm}2.11%$) and T2 ($47.80{\pm}1.29%$), respectively (p<0.05). However, the ratio of n-6:n-3 was significantly low in T1 ($11.57{\pm}0.90$) than that of T2 ($37.56{\pm}12.51$) (p<0.05). There was no signigicant difference in lightness, redness, pH, water holding capacity and cooking loss between treatments (p>0.05). However, the yellowness of T2 was significantly higher than others (p<0.05). From those results, it was considered that feeding high n-3 and n-6 fatty acid diet to pig enables modify fatty acid profile of pork without any side effect on meat quality.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.266-270
• /
• 2005

The effect of the weight ratio of carbon source to nitrogen source on the growth and the composition change of fatty acids of Thraustochytrium aureum ATCC 34304 was investigated. The cell concentration of 5 days' culture increased and then decreased according to the increase of C/N, The ratioes for the maximum biomass were unique respectively and distributed between 1 and 4 with the initial sugar concentration in the range of 5 g/L to 25 g/L. The biomass yield, $Y_{x/s}$ decreased along with the increase of C/N, but maintained a constant value 0.35 between 10 and 20. The composition of myristic acid $(C_{14:0})$, one component of the lipid synthesized by T. aureum, was not affected with the change of C/N, but the composition of palmitic acid $(C_{16:0})$ was around $20\%$ below 4 of C/N and decreased to $15\%$ according to C/N about 4. The compositions of oleic acid $(C_{18:1})$ and linoleic acid $(C_{18:2})$ increased from 0 to $20\%\;and\;7\%$ respectively. The composition of $\gamma-linoleic$ acid $(C_{18:3})$, however, reduced from $5\%\;to\;2\%$. EPA $(C_{20:5})$ and DPA $(C_{22:5})$ showed a tendency of reduction in the weight composition according to the increase of C/N, but DHA $(C_{22:6})$ had a trend maintaining an approximately constant value, around $40\%$, irrespective of the change of C/N.