Purpose : The purpose of this study is to analyse affecting factors of Test and Evaluation and to improve the institution of Test and Evaluation in the Domestic purchase program. Methods : The domestic acquisition program is currently small in terms of size, but it is gradually increasing every year. Still, the domestic purchase program has insufficient regulations and procedures compared to the other procurement methods including research & development. Various problems are likely to occur between test and evaluation group, and defense industries regarding the regulations during Test & Evaluation. Therefore, the regulations and methods need to be amended to upgrade the current domestic purchase program into an effective and flawless one. In this paper, six variables have been chosen by the help of experts working in Ministry of National Defense (MND), Joint Chiefs of Staff (JCS), Army Headquarters and DAPA. Results : The six variables are effectiveness of proposal evaluation, fairness of test and evaluation, sufficiency of operational capabilities, seasonal period of test and evaluation, fulfillment in Integrated Logistics Support (ILS) of the industries, and guaranteeing appropriate environment for related enterprises' participation. Conclusion : This paper can help defense industries to enhance their development capabilities, and to perform tests more fairly and effectively considering the key factors identified in this research.

We analyse reliability of multi-state UH-60 helicopter hydraulic pump system with a multi-functional standby component using Markov analysis method. The system consists of seven components: 2 main pumps, 1 standby pump, 2 primary servos, and 2 tail rotor servos. The standby pump can take over when one more than components fail. Therefore the standby pump is multi-functional standby component. The system has four states: good, deteriorated, dangerous, and failed. The components have 2 states: working and failed. We assume the system is unrepairable when the components fail. We estimate failure distributions and rates using collected failure time data in field. And we classify multi-state of the system according to emergency procedure of UH-60A student handout. We obtain the reliabilities of multi-state system using Visual Basic program because the differential equations is extremely complicated and tedious to solve.

Purpose : The demand for higher fuel economy vehicles has helped develop fuel-efficient vehicles such as a CVVL called continuous variable valve lift. Existing CVVL has been applying DC type motor to control intake valve, but recently some car parts manufacturers have been developing a BLDC type CVVL motor for improvements of endurance performance. The purpose of this study is to find the potential failure mechanism of the CVVL BLDC moto in early stage of development based on the design properties and design the accelerated life test model. Methods : CVVL BLDC is consist of brushs, coil, magnetic, PCB, bearing and so on. Each component has a latent failure mechanism caused by temperature, humidity, vibration. By analysis result of the failure mechanism, thermal fatigue is the most important factor of a durability of CVVL BLDC motor. So, we designed a new accelerated life test model for guarantee of the CVVL BLDC motor. Results : A crack occurred on via hole in test using the conditions we designed, so we did change the design to avoid this failure. The via hole dimension is changed a little larger, as a result we achieve improvements in reliability of the CVVL BLDC motor. By applying various kinds and extreme level of stresses, we can find the operating limits of products. Conclusion : In thesis, We analyzed the failure mechanism of CVVL BLDC and designed an accelerated life test method to give a guarantee for reliability. Based on the test results, we could improve the reliability of developments by change of design.

Purpose : The purpose of this research is to develop the optimized method and process in the reliability-growth target setting, especially for complex and repairable system (or products) such as vehicle and airplane, construction equipment. Method : A reliability-growth test plan specifies a scenario to achieve the planned reliability value (or reliability target). The major elements in test planning are reliability-growth starting time and reliability level at that time, reliability-growth rate and reliability-growth target. All of them except a reliability target can be referred to the previous development data and reference researches. The reliability target level is directly influencing to test period (or time) which is related to test and warranty cost together. There are a few researches about the reliability target setting method and but showing the limitations to consider the views of engineering, business and customer together. There is no research how to handle the target setting process in detail. Result : We develop the optimized method and systematic process in reliability target setting with considering such views. This research also establish the new concept as production capability which means company (or supplier) capability to product its products. Conclusion : In this research result, we apply the new method to a few projects and can set the reasonable test planning. The developing results is showing the good balance between the developing cost and warranty cost at market.

The aim of this paper is to present some issues to be discussed in relation to failure rate of a system that has identical parallel units. It is assumed that Time-to-Failure of each unit has the same exponential distribution and all units are repairable with a periodic maintenance of time interval T. Effective failure rate is widely recommended for nonrepairable systems as the reciprocal of MTTF but it should not be applied for repairable systems if delayed maintenance is used. And equivalent failure rate of an imaginary system is taken into consideration, the reliability value of which is the same as that of the redundant system when time interval T is given. With a numerical example, failure rate, effective failure rate, and equivalent failure rate of the redundant system are analyzed comparatively.

Accelerated degradation mechanism of the heat-resistant steel for high temperature plant was analysed in terms of microstructure and hardness. In order to simulate the microstructure of the steel actually used at $540^{\circ}C$ in the field, isothermal exposure was carried out at $630^{\circ}C$ up to 4,800 hours. The artificial degradation mechanism was comparatively verified to successfully simulate degradation of the long-time used field material. For the artificially degraded specimens, databases including size and aspect ratio of carbide, chemical composition (i.e., Cr/Mo ratio) of grain boundary carbide were built up. These degradation parameters were suggested as fingerprints for PHM (i.e., prognostics health management) of power plants.

Purpose : UHMWPE (Ultra-high-molecular-weight-polyethylene) is one of the most widely used material in knife protection clothes because of high strength, elasticity, and light weight. The purpose of this study is to develop the accelerated life test method and predict the lifetime for the knife protection fabric composed by UHMWPE. Methods : In this study, degradation characteristics of UHMWPE fibers and knife protection fabric for cut resistance were evaluated under the hydrolysis and photo-degradation conditions. It was found out that the degradation rate of retained tensile strength was more significant in the photo-degradation than hydrolysis. Therefore, the failure time was determined as the time that the retained tensile strength in photo-degradation is less than 50%. Considering an acceleration factor for irradiance and exposure time, the lifetime was predicted from the calculated failure time. Results : As a result of the accelerated life test, the $B_{10}$ lifetime of knife protection fabric composed by UHMWPE fibers is estimated as 2.8 years for a 90% statistical confidence level. Conclusion: Since the lifetime is predicted by the view-point of radiant exposure in this study, there is a possibility that the estimated lifetime may differ from the actual lifetime. However, it is considered as an useful methodology to estimate the long-term lifetime of knife protection fabrics.

Purpose : The purpose of this study is to propose that domestic rail must the work to be done in the RCM system and railway operators are to present a direction to establish the efficient and systematic system based on this. Methods : In recent years, domestic railway accidents has decreased year rapidly every year. In particular, suicidal ideation was greater than 50% of the accidents is showing a larger decrease in the influence of the screen-door construction. However, the train delay has been maintained without major changes since 2010. The most important cause of the delay operation is a vehicle breakdown. This fact demonstrates that effective maintenance of the most important activities in the railway accident prevention activities. So we have to build a RCM system in which the characteristics of the domestic railway accident. Conclusion : We proposed what is necessary functionality and the function requires a railway operators in RCM railway systeml.

Purpose : The purpose of this study is to compare the RAM (reliability, availability and maintainability) value in the acquisition phase with operational period for air weapon systems. The objective is to determine if the value of RAM is sufficient in the field, and look for any difference from the target value to some extent. Methods : For a case study, the ${\bigcirc}{\bigcirc}$ training aircraft is selected. Data from the two acquisition sources are utilized. One is the operational data in domestic aircraft through research and development, and the other is the data from imported aircraft. The two different sources were collected independently and distinctly. Results : According to the analysis, the domestic aircraft shows high deviation in RAM value compare to the imported systems. This is due to the effort of continuous reliability improvement. In the aspect of maintainability, the result shows a slight deviation, and the availability meets the requirement. Conclusion : The results of this study can be used in finding a way that can be effectively applied to the sustainability in the weapon system. If the RAM performance is significantly lower than the target value, then it is necessary to improve the design activities so that they can achieve the RAM target value.