The feasibility of treating three softwood(Japanese larch pitch pine, and Korean pine) thinned logs by double-diffusion treatment processes was investigated. Some posts were incised before immersion, and others were imersed in hot copper sulfate solution. Comparison among species indicated that. in general, pitch pine was most treatable and Japanese larch least treatable. For all three species, almost all treatment schedules gave consistently good penetration and high net retention, but very steep gradient of preservative distribution. As expected, the treatability was increased by the extension of immersion time, increased concentration of treating solution, incising. and heating of the first solution. Of the variables tested, it appears that heating of the first solution is the most important. From the data in this paper, it may be concluded that, if the first solution is not heated, the best schedule is #3. If the first solution is healed. it appears the best schedules are #10 or #11. Since heating of the first solution improves the treatability. schedules # 10 or :#11 are recommended if the cost of heating might be justified. The data presented in this paper indicate that double-diffusion treatment processes seem to offer a promise as a comparatively effective and easy-operating method of treating thinned logs for the small-scale production of treated stock.

This study was carried out to examine not only the effect and the process of activation of aluminum sulfate for the manufacture of PB and MDF, but also application of the activation treatment to PB and MOF made with MDI adhesive. The results were as follows: 1. For the manufacture of PB, activating effect did not take place Because the low moisture content of 30% in the process of activation treatment made probably insufficient activation. It needs to examine higher moisture content for the uniform and enough activation same as that of MOF. 2. In the case of MOF, Activating effect was excellent, it showed not only better results of MOR 48%, MOE 29%, IB 60% than those of the control but also better dimensional stability. 3. Application of alum activation to the PB and MDF made with MDI adhesive yielded no effects. Maybe it was the reson that the curing mechanism of MDI is different. 4. Modifing the wood surface was the oxidation and wettability was not the variable limiting glueline performance. It is necessary to make a more study about activating reaction.

Three kinds of specimens(radiata pine sapwood, radiata pine heartwood and whemlock heartwood) were dried at four temperature levels (30, 40, 50 and $60^{\circ}C$) in an emvironmental chamber. Unsteady-state diffusion coefficients were calculated from obtained drying fates by using infinite slab equation for first half of sorption and interval diffusion equation for second half of sorption. Activation energies for moisture diffusion in wood were calculated from the diffusion coefficients obtained at four temperatures. In most cases diffusion coefficients for radial movement were higher than those for tangential movement. Activation energy differences between sapwood and heartwood weren't significant for radial movement, but were significant for tangential movement. Most activation energies calculated from drying rates were lower than heat of water condensation(about 11,000cal/mole). Specially the avenge activation energy for sapwood tangential movement was only 5,000cal/mole.

Protection of tropical forest affects on significant reduce of tropical hardwood supply, and softwood resources will be increasingly important for the timber security in Korea. U.S. softwood log was most favorite species for Korean softwood log importers in overall import conditions except price stablization and consistency of export policy. Reduced export volume from Pacific Northwest to Korean market has been immediately replenished by rediata pine from New Zealand and Chilean plantation. Siberian timber will hardly play major roles in Korean timber market unless budding structure. softwood plywood and softwood furniture uses are enhanced. Recent rapid rise of labor cost and reducing tariff rrate in Korea provided better opportunities for import lumber in building materials market. Dry dimension lumber was relatively profitable when processed from import U.S. soft-wood log while green lumber was favorable products processed from radiata pine log in Korean lumber market. This means U.S. softwood lumber would have better opportunity to market for '2${\times}$'4 studs when wood frame housing is introduced. On the other hand while radiata pine is competitive on temporary construction lumber such as supporter and concrete forming frame in Korea. Shortage of raw material for the new capacity of board plants in Korea will be it bottle neck. Major log export countries to Korea as U.S. New Zealand and Chile showed high trade intensity indices of composite hoard produces for Korean market. As Korea efforts to diversify import sources, and tariffs are reduced to 8% as scheduled by 1994. countries of scoring higher comparative advantages as Portugal. Brazil, Austria as well as New Zealand will have better opportunity to penetrate into promised Korean composites hoard market.

This study was carried out to determine the withdrawal strength of various screws according to root diameter of screw and embeded length on the face and edge of domestic particleboard and medium density fiberboard. The obtained results were as follows: 1. The withdrawal strength of screw in domestic particleboard and medium density fiberboard was closely related to embeded length of the screw but less dependent on root diameter of the screw. 2. The withdrawal strength on the face and edge of domestic particleboard could be predicted by means of the following expression: $F_{Pf}=4.60{\times}D^{0.24}{\times}L^{1.14}(R^2=0.87)$ $F_{Pe}=0.54{\times}D^{0.43}{\times}L^{1.73}(R^2=0.84)$ Where: $F_{Pf}$ : withdrawal strength on the face of particleboard(kgf) $F_{Pe}$=withdrawal strength on the edge of particleboard(kgf) D=diameter of the screw(mm) L=embeded length(mm) 3. The withdrawal strength on the face and edge of domestic medium density fiberboard could he predicted by means of the following expression: $FM_f=1.53{\times}D^{0.53}{\times}L^{1.39}(R^2=0.93)$ $F_{Me}=1.14{\times}D^{0.66}{\times}L^{1.36}(R^2=0.87)$ where: $F_{Mf}$ = withdrawal strength on the face of medium density fiberboard(kgf) $F_{Mf}$=withdrawal strength on the edge of medium density fiberboard(kgf).

In this paper, the difference of the property of absorption and desorption for five species in semi-steady state are studied. The species used are listed in Table 1 and the dimension of specimen was $8\times8{\times}T$(Tangential direction)cm and tested in various conditions. A change of average moisture content with time were measured in each cycles. The results obtained are summarized as follows. When the relative humidity in air was maximum or minimum, the distribution of moisture In wood of all specimens were illustrated by exponential curves of decrease or increased from lace 10 center of wood. From the consideration of coefficient of decrease(C), the amount of moisture change of spruce was larger than the others. The pheonomenon was considered no relation to the specific gravity in air dry, but the wood structures. The velocity of the absorption and desorption for species decreased in the order spruce(Picea sitchensis) neodobam(Fagus crenata), solsong(Tsuga heterophylla), meranti(Shorea sp.) and kaesoo(Cercidiphyllum japoicum). In case of constant temperature and water vapor pressure is changed. the amount of absorbed moisture was larger than that of constant water vapor pressure and temperature vaned. In this fact, it is considered that the property of sorption of wood is strongly influenced by vapor pressure gradient than temperature gradient.

New Zealand 남섬의 Canterbury 지방과 Nelson 지방의 붕소(硼素) 결핍지역(缺乏地域)과 붕소(硼素) 시비지역(施肥地域)에 생육(生育)하고 있는 라디아타소나무의 해부학적(解剖學的) 차이(差異)를 조사(調査)하였다. 즉 가도관(假導官)의 길이, 방사방향(放射方向)의 가도관(假導官) 내경(內徑), 방사방향(放射方向) 세포벽(細胞璧)의 두께를 조(早), 만재별(晩材別)로 측정(測定)하였고 광학현미경(光學顯微鏡) 및 전자현미경(電子顯微鐘) 특성(特性)을 관찰(觀察) 하였다. 만재(晩材)에서는 가도관(假導官)의 길이에 붕소(硼素) 결핍지역(缺乏地域) 간(間)에 유의차(有意差)가 인정(認定)되었으나, 조재(早材)에서의 가도관(假導官)의 길이 및 가도관(假導官)의 내경(內徑) 및 가도관벽(假導官璧)의 두께는 조(早), 만재(晩材) 모두에서 유의차(有意差)가 인정(認定)되지 않았다. 그러나 붕소(硼素) 결핍지역(缺乏地域)에서 생육(生育)된 리디아타소마누에서는 세포벽(細胞璧)의 박리현상(剝離現象) 및 목질화(木質化)가 덜된 부분(部分)에 많이 관찰(觀察)되었고, 찌그러진 세포(細胞)의 다수출현(多數出現) 및 세포(細胞)의 크기가 불균일(不均一)한 것이 많이 출현(出現)되었으며 세포벽(細胞璧)의 간층(間層)이 넓었음이 관찰(觀察)되었다.

The flavonoids from plants is very widly used as natural dye for food and medicine etc. In this study, red pine which is widespread in Korea was studied to find new chemicals which may use as raw material for the special purpose. The fIavonoids of red pine bark were separated with Sephadex LH-20 and Toyo pearl HW-40F as packed materials and the structure of separated f1avonoids was determined by $^1H$-and $^{13}C$-NMR spectroscopy. The (+) catechin which is widespread in nature and dihydroquercetin-3'-0-${\beta}$-galactoside were found in red pine bark. The dihydroquercetin-3'-0-${\beta}$-galactoside is newly found in this species.

Lignocellulosic biomass including acetosolv ricestraw and spruce lignin were liquefied and converted into liquid hydrocarbons by catalytic hydroliquefaction reaction. These experimental works were carried out in 1-liter-capacity autoclave using 50% tetralin and m-cresol solution respectively as soluble solvent and Ni. Pd. Fe and red mud as catalyst. $H_2$ gas was supplied into the reactor for escaltion of deoxhydroenolysis reaction. Catalyst concentrations were 1 % of raw material based on weight. The ratio between raw materials and soluble solvent are 1g and 10cc. The reaction conditions are 400-$700^{\circ}C$ of reaction temperature, 10-50 atms of reaction pressure. The highest yield of hydrocarbon, so called "product oil" showed 32% and 5.5% of lowest char formation when red mud was used as catalyst. The product oil yields from those of other catalysts were in the range of 20-29%. The influence of different initial hydrogen pressures was examined in the range d 30-50 atms. A minimum pressure of 35 atms was necessary to obtain a complete recovery of souble solvent for recycling.