참고문헌
- Krishna, A., 1996, "Edge delamination of residually stresses thin film: visco-elastic effects," International Journal of Fracture, Vol. 75, pp. 215-228 https://doi.org/10.1007/BF00037083
- Srinivas, M. V. and Ravichandran, G., 1994, "Interfacial crack propagation in a thin visco elastic film bonded to an elastic substrate," International Journal of Fracture, Vol. 65, pp. 31-47 https://doi.org/10.1007/BF00017141
- Jiang, Z. Q., Huang, Y., and Chandra, A., 1997, "Thermal stresses in layered electronic assemblies," Trans. of ASME Journal of Electronic Packaging, Vol. 119, pp. 127-132 https://doi.org/10.1115/1.2792218
- Yi, S. and Sze, K. Y., 1998, "Cooling rate effect on post cure stresses in molded plastic IC packages," ASME Journal of Electronic Packaging, Vol. 120, pp. 385-390 https://doi.org/10.1115/1.2792651
- Burger, K., 1995, "Fracture mechanical characterization of IC-device interface," Quality and Reliability Engineering International, Vol. 11, pp. 299-305 https://doi.org/10.1002/qre.4680110415
- Qian, Z., Lu, M., and Liu, S., 1998, "Constitutive modeling of polymer films from viscoelasticity of visco-plasticity," Trans. of ASME Journal of Electronic Packaging, Vol. 120, pp. 145-149 https://doi.org/10.1115/1.2792605
- Weitsmann, Y., 1979, "Interfacial stresses in viscoelastic adhesive layers due to moisture sorption," International Journal of Solids and Structures, Vol. 15, pp. 701-713 https://doi.org/10.1016/0020-7683(79)90068-4
- Delale, F. and Erdogan, F., 1981, "Viscoelastic analysis of adhesively bonded joins," Trans. of ASME Journal of Applied Mechanics, Vol. 48, pp. 331-338 https://doi.org/10.1115/1.3157618
- Cho, J. R., Yang, S. C., and Jung, Y. G., 2006, "A Study on the Improvement of Performance for High Speed Cutting Tool using Magnetic Fluid Polishing Technique," Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 1, pp. 32-38
- Kim, H. G., Kim, Y. S., Yang, S. M., and Nah, S. C., 2005, "A Study on Unit Cell Design for the Performance Enhancement in PEMFC System," Transactions of the Korean Society of Machine Tool Engineers, Vol. 14, No. 4, pp. 104-109