한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

분포정수계 관로모델을 이용한 비정상 유량계측

Unsteady Flow Rate Measurement Based on Distributed Parameter Pipeline Model

  • 발행 : 2008.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The paper proposes a model-based measurement of unsteady flow rate by using distributed parameter pipeline model and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-diagnostics functions of the measurement method, the validity is investigated by comparison with the measured and estimated pressure and flow rate wave forms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate wave forms and theoretical those under unsteady laminar flow conditions. The method proposed here is useful in estimating unsteady flow rate through an arbitrary cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

키워드

참고문헌

  1. Miller, R. W., 1996, Flow Measurement Engineering Handbook, McGraw-Hill, New York
  2. Yokota, S., Ide, H. and Nakano, K., 1987, "Improvements of Functions in a Cylindrical-Choke-Type Instantaneous Flowmeter," Trans. of the Japan Society of Mechanical Engineers(Series B), Vol. 53, No. 489, pp. 1548-1552 https://doi.org/10.1299/kikaib.53.1548
  3. Kim, D. T. and Yea, Y. T., 2000, "An Investigation into the Dynamic Characteristics of Turbine and Gear Motor Type Flowmeter," J. of the Korean Society of Machine Tool Engineers, Vol. 9, No. 3, pp. 83-89
  4. D'souza, A. F. and Oldenburger, R., 1964, "Dynamic Response of Fluid Line," Trans. ASME, J. of Basic Engineering, Vol. 86, No. 3, pp. 589-598 https://doi.org/10.1115/1.3653180
  5. Brown, F. T., 1962, "The Transient Response of Fluid Line," Trans. ASME, J. of Basic Engineering, Vol. 84, No. 4, pp. 547-553 https://doi.org/10.1115/1.3658705
  6. Kim, D. T., Lee, S. G. and Yokota, S., 1999, "A Study on the Measurement of Delivery Flow Ripple Generated by Hydraulic Axial Piston Pumps," J. of the Korean Society of Machine Tool Engineers, Vol. 8, No. 2, pp. 35-43
  7. Yokota, S., Kim, D. T. and Nakano, K., 1991, "An Approach to Unsteady Flow Rate Measurement Utilizing Dynamic Characteristics between Pressure and Flow Rate along a Pipeline," Trans. of the Japan Society of Mechanical Engineers(Series C), Vol. 57, No. 541, pp. 2872-2876 https://doi.org/10.1299/kikaic.57.2872