• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.81-86
• /
• 2009

Infrared thermography was used to determine the location, size, and depth of defects under the surface of M.C nylon. Defects were created in a specimen by back-drilling circular holes. These defects were located at the maximum temperature difference that occurred. The sizes of the defects could be calculated by means of the full width at half of the maximum temperature difference. The depth of a defect could be calculated by the peak time and the maximum temperature difference. The maximum temperature difference between a defect and normal part was decreased with the depth of the defect. And the peak time also slowly appeared with the depth of the defect.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.5
• /
• pp.392-400
• /
• 2011

Purpose: Cleft lip and palate is one of the most frequent hereditary deformities of the maxillofacial region which can arise in facial and jaw abnormalities as well as malocclusion and speech problems. In particular, unilateral cleft lip and palate is characterized by midface deformity resulting in maxillary anterior nasal septal deviation and nasal deformity. The aim of this study is to analyze the facial deformity of untreated unilateral cleft lip patients for contribution to primary cheiloplasty. Methods: Thirty-three patients with unilateral cleft lip and palate were impressioned before operation and facial casts were made. The casts were classified into complete cleft lip and incomplete cleft lip groups and each group were classified into affected side and normal side. Anthropometric reference points and lines were setted up and analysis between points and lines were made. Results and Conclusion: The obtained results were as follows: 1. The intercanthal width had no significant difference between the incomplete and complete cleft lip groups. 2. Cleft width and alar base width were greater in the complete group, and nasal tip protrusion was greater in the incomplete group. 3. Involved alar width and nostril width were greater in the complete group and in both complete and incomplete groups, involved alar width and nostril width were greater than the non-involved side. 4. The lateral deviation of the subnasale was greater in the complete group in both involved and non-involved sides. 5. The nasal laterale was placed inferiorly in both cleft groups. 6. The subnasale was deviated to the non-involved side in both cleft groups. 7. The nose tip was deviated to the non-involved side in both cleft groups and had greater lateral deviation in the complete cleft group. 8. The midpoint of cupid's bow had no vertical difference between complete and incomplete groups, but had a greater lateral deviation in the complete group. 9. In the complete cleft group, correlation between differences in cleft width and nostril width and columella height difference were obtained.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.135-142
• /
• 1998

The purpose of the present study was to evaluate the effect of incisor protrusion on the mucogingival parameters including the width of attached gingiva. Thirty-seven young adults with lower anterior crowding were selected for this study. From the study model, the degrees of relative and absolute protrusions were measured for each lower incisor. Clinical non height, the width of keratinized gingiva, probing depth and the width of attached gingiva were measured with digital vernier calipers and Florida Probe System. Through comparing the difference of the above measurements between protruded and non-protruded incisors, and correlation analysis between each measurement, following results were obtained: 1. The protruded incisor showed narrow width of keratinized and attached gingiva comparing to non-protruded incisor. 2. The protruded incisor showed greater clinical crown height comparing to non-protruded side while there was no difference in the probing depth between protruded and non-protruded side. 3. The difference in the width of attached gingiva between protruded and non-protruded incisors showed higher significance in the lateral incisor than in the central incisor. 4. The degree of relative protrusion showed higher correlation with the width of attached gingiva than the degree of absolute protrusion. 5. Clinical crown height showed higher correlation with the width of attached gingiva than the degree of protrusion.

• Journal of Periodontal and Implant Science
• /
• v.46 no.5
• /
• pp.329-336
• /
• 2016

Purpose: The aim of this study was to clinically assess the impact of a prefabricated implant-retained stent clipped over healing abutments on the preservation of keratinized mucosa around implants after implant surgery, and to compare it with horizontal external mattress sutures. Methods: A total of 50 patients were enrolled in this study. In the test group, a prefabricated implant-retained stent was clipped on the healing abutment after implant surgery to replace the keratinized tissue bucco-apically. In the control group, horizontal external mattress sutures were applied instead of using a stent. After the surgical procedure, the width of the buccal keratinized mucosa was measured at the mesial, middle, and distal aspects of the healing abutment. The change in the width of the buccal keratinized mucosa was assessed at 1 and 3 months. Results: Healing was uneventful in both groups. The difference of width between baseline and 1 month was $-0.26{\pm}0.85mm$ in the test group, without any statistical significance (P=0.137). Meanwhile, the corresponding difference in the control group was $-0.74{\pm}0.73mm$ and it showed statistical significance (P<0.001). The difference of width between baseline and 3 months was $-0.57{\pm}0.97mm$ in the test group and $-0.86{\pm}0.71mm$ in the control group. These reductions were statistically significant (P<0.05); however, there was no difference between the 2 groups. Conclusions: Using a prefabricated implant-retained stent was shown to be effective in the preservation of the keratinized mucosa around implants and it was simple and straightforward in comparison to the horizontal external mattress suture technique.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.69-78
• /
• 2001

Alveolar cleft exists in 75% of cleft patients, In alveolar cleft patients, alar base is widening, palatal fistular formation, maxillary growth disturbance & tooth loss of adjacent area is raised, Alveolar bone grafting, especially iliac bone grafting, is a general treatment method. As operation timing, bone grafting is classified with primary, early secondary, secondary, & late secondary, Here we report cleft width, marginal bone height, bone resorption rate, grafted shape & bone densities after secondary iliac bone grafting was done in the Dept. of oral and maxillofacial surgery of chonbuk national university hospital. We compared cleft width to bone resorption rate and grafted shape. Also, alveolar bone densities of grafted and contralateral site was compared with Emago 3 package? (Oral Diagonostic System, The Netherlands), The data obtained were analyzed using Spearman's rho coefficients and sign test with SPSS for window, The results were obtained as follows. 1. As alveolar cleft width is increase, bone resorption rate is, too. This relation showed significant difference(P<.01). 2, In proximal & distal area, alvolar cleft width and bone graft contour after bone grafting had a reverse proportional difference. It was not significant difference(P>.05). 3. After 3 month, in bone density results by using Emago 3 package? with periapical standard view, occlusal view & panoramic view, differences between grafted bone and alveolar bone of contralateral site didn't show a significant difference(P>.05). Thus, differences of bone densities in the alveolar bones didn't exist.

• Journal of the Korean Institute of Educational Facilities
• /
• v.21 no.3
• /
• pp.11-18
• /
• 2014

This study was carried out to observe movement behavior of students about a change of physical condition in moving space of variation type using simulation technique. The moving pattern of students was checked by SIMULEX program. The width of corridor was adjusted to 2.4m, 3.0m and 3.9m and a flow coefficient of simulation was estimated with the change of width. The wider the width of corridor was, the lower a flow coefficient was, and the difference was large when the width of corridor was narrow. It was also observed that the flow coefficient was relatively high in all types of corridor setup individual locker. Unit occupation area with the change of width was additionally measured, as shown in the results, the occupation density was low when the width of corridor was wide and a stationary time was short.

• Restorative Dentistry and Endodontics
• /
• v.12 no.2
• /
• pp.83-90
• /
• 1987

Composite resins has been widely used in dental clinics because of esthetic restoration. The aim of this study was to assess the effects of the cavity designs on the compressive stress of resin restoration. So, the author made the standardized specimen of four types (Type of speciemen are width 1.5mm, depth 2mm, width 1.5mm, depth 3mm, width 2mm, depth 2mm, width 2mm, depth 3mm). The compressive strength was measured by universal testing machine (Tong Kwang Co.) The results indicating following; 1. There was a statistic significance of compressive strength between four cavity forms. 2. There was no difference of significance of compressive strength between two resins. 3. There was a significance of compressive strength between depth 3mm width 1.5mm and depth 3mm width 2mm.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.481-493
• /
• 1991

The purpose of this study was to obtain the norm of the crown shape (tip, torque, in/out) and arch form, and to provide basic data for fabricating straight wire bracket and ideal arch wire for Korean. 100 subjects aged from 17 to 26 (50 females, 50 males) were selected with a normal occlusion. By measuring the size, angulation, inclination, arch width, facial prominance of the teeth and the molar offset, the following results were obtained. 1. Average, standard deviation, minimum, maximum of each measuring item for each teeth were obtained. 2. Intermolar width (${\underline{6}}$ to ${\underline{6}}$) of upper arch before occlusal surface cutting and intermolar width of upper arch (${\underline{6}}$ to ${\underline{6}}$, ${\underline{7}}$ to ${\underline{7}}$) after occlusal surface cutting showed statistical difference. There was no difference between sexes in any other measuring items. 3. Arch form and specification of straight wire bracket for Korean who have normal occlusion was obtained.

• Fashion & Textile Research Journal
• /
• v.7 no.3
• /
• pp.301-308
• /
• 2005

The purpose of this study is to design men's clothing pattern that supplemented the problems of body shapes, by grasping the physical characteristics of middle-aged men and classifying their body shapes through comparing measurements after carrying out the human-body measurement targeting 120 middle-aged men at the age of 35-49 in full. As to the technical-statistic analysis of the measurement items, it could be seen that the middle-aged people who are the research target, have the obese body shapes. As a result of carrying out the factor analysis by the measurement analysis, it was derived the totally five factors such as thickness and width, stature and height, weight and girth, the bust length, and the shoulder shape. The total communality is 78.47%, and as a result of the cluster analysis by the factor score, it was classified into three clusters. Type 1 is the body shape with the great stature, the waist region a little obese, and the biggest thickness, width and girth. It is a flat body shape with the narrow shoulder and the smallest difference between the breast width and the waist width. As type 2 is the body shape that is small stature and is relatively not fat, it is the shape with the biggest difference between the breast width and the waist width and with the wide shoulder. Type 3 is the body shape that belongs to the middle of type 1 and type 2, has the upper-part body longer than other body shapes, and has the developed breast region with the biggest bosom width and bosom thickness.