• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.2
• /
• pp.118-125
• /
• 2010

This paper describes a mid-course guidance strategy based on the earliest intercept geometry (EIG) guidance. An analytical solution and performance validation will be addressed for generalized mid-course guidance problems in area air-defence in order to improve reachability and performance. The EIG is generated for a wide range of possible manoeuvres of the challenging missile based on the guidance algorithm using differential geometry concepts. The main idea is that a mid-course guidance law can defend the area as long as it assures that the depending area and objects are always within the defended area defined by EIG. The velocity of Intercept Point in EIG is analytically derived to control the Intercept Geometry and the defended area. The proposed method can be applied in deciding a missile launch window and launch point for the launch phase.

• Journal of the Korean Home Economics Association
• /
• v.20 no.2
• /
• pp.37-43
• /
• 1982

The white color is the main characteristics of the traditional color of clothes. From the historical point of view, the Korean's pattern of wearing Baik-Eui can be found its origin from many people of North-East Asia in ancient time. The beginning of wearing Baik-Eui in Korea was at the age of tribes, and it was delivered to middle age, later on, to modern age near the end of Yi Dynasty. The other charactics of the traditional colors. are summarized as follows: 1. Prefered light color to dark color and light blue was noble and worthy. 2. The kinds of color were not various. 3. Color was native and pure not including grey or other colors. From the economical point of vie, the first thing is that Baik Eui was primitive in ti's color Though some say that wearing Baik-Eui is considered as a kind of worship of the Sun, yet we can also find that the every reason of it is that we had little dyes at that time. Especially the reddish dyeing materials were in short supply, so that had been imported mainly from Japan.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.106-109
• /
• 2003

This paper presents a hue preserving gamut mapping algorithm for color monitor and printer. The gamuts of monitor and printer are set by the profile of color reproduction media, specified by ICC(International Color Consortium) and provided by vendors, then those gamuts are represented on the CIE xy color space. In case that the color of monitor are located on out-of-gamut of printer, these are clipped on the point of gamut boundary of printer towards a reference white point. On the other hand, colors are in-gamut of printer are unchanged. An image generated by the algorithm keeps a ratio of each pixel of original image. Advantages of the algorithm are easy to implement and fast processing time than other algorithms which involve hue preserving especially in CIELAB color space.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.125-137
• /
• 2008

This research aims to produce basic data for developing habitat suitability models on the breeding sites of Oriental White Storks(Ciconia boyciana) which will be reintroduced to the wild in the future. The habitat characteristics of ten historical nesting sites of the Oriental White Storks at Gyeonggi and Chungcheong provinces in South Korea were analyzed with 1970's land use maps and Landsat MSS. The range of altitude on nesting sites was 40~116.38m. The mean distance from nesting sites to rice fields, to 30m wider river, and to reservoirs was $54.8{\pm}84.48m$, $869.8{\pm}708.01m$, and $1721.2{\pm}906.05m$ respectively. Historical nesting sites were located close to human settlements, and the mean distance of nesting sites to human settlements was $144.1{\pm}182.97m$. The land types within 5km radius from ten historical nesting sites consisted of 53.7% forest, 28.3% rice fields, 16.7% grasslands, 0.8% water bodies, and 0.6% human settlements. The composition of four land types(forest, rice fields, grasslands, and human settlements) was significantly differed between 93 random points and 10 historical nesting sites.

• Journal of Society of Preventive Korean Medicine
• /
• v.17 no.3
• /
• pp.155-164
• /
• 2013

Purpose : This study was conducted to assess whether Korean medicine doctors' attire influences patients' preference (confidence, comfortability, neatness) in a university hospital. Materials and Methods : Employing a cross-sectional design, outpatients answered a questionnaire in a university hospital of Korean Medicine. Respondents were asked for completing the questionnaire to estimate their preference of doctor's attire for confidence, comfortability and neatness after watching 4 types of attire in both male and female Korean medicine doctors, including white coat, traditional attire, formal suit and casual clothes. Whether Korean medicine doctors' attire on a patients' preference is important was also asked for the respondents using a 5-point Likert scale. Results : All 175 patients were enrolled, of whom 38.9% were male respondents, 46.3% graduated from a university at least and mean age of responders was 47.1. Most had a tendency for preferring white coat followed by traditional attire and only a small portion of respondents preferred for formal suit and casual clothes. When comparing preferences in confidence between white coat and traditional attire only, male patients preferred white coat more than female patients did with statistical significance. In addition, 85.4% of respondents answered that Korean medicine doctors' attire is important to a clinical situation with higher ratio of female respondents (87.9%) than male respondents (80.9%). Conclusion : Patients preferred white coat and traditional attire mostly for the Korean Medicine doctor's attire with only small preference for formal suit and casual clothes. Also, Patients recognized that Korean medicine doctors' attire is important in the clinical situation.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.452-456
• /
• 2013

PURPOSE. The aim of this study was to evaluate the repeatability of the digitizing of silicon rubber impressions of abutment teeth by using a white light scanner and compare differences in repeatability between different abutment teeth types. MATERIALS AND METHODS. Silicon rubber impressions of a canine, premolar, and molar tooth were each digitized 8 times using a white light scanner, and 3D surface models were created using the point clouds. The size of any discrepancy between each model and the corresponding reference tooth were measured, and the distribution of these values was analyzed by an inspection software (PowerInspect 2012, Delcamplc., Birmingham, UK). Absolute values of discrepancies were analyzed by the Kruskal-Wallis test and multiple comparisons (${\alpha}$=.05). RESULTS. The discrepancy between the impressions for the canine, premolar, and molar teeth were $6.3{\mu}m$ (95% confidence interval [CI], 5.4-7.2), $6.4{\mu}m$ (95% CI, 5.3-7.6), and $8.9{\mu}m$ (95% CI, 8.2-9.5), respectively. The discrepancy of the molar tooth impression was significantly higher than that of other tooth types. The largest variation (as mean [SD]) in discrepancies was seen in the premolar tooth impression scans: $26.7{\mu}m$ (95% CI, 19.7-33.8); followed by canine and molar teeth impressions, $16.3{\mu}m$ (95% CI, 15.3- 17.3), and $14.0{\mu}m$ (95% CI, 12.3-15.7), respectively. CONCLUSION. The repeatability of the digitizing abutment teeth's silicon rubber impressions by using a white light scanner was improved compared to that with a laser scanner, showing only a low mean discrepancy between $6.3{\mu}m$ and $8.9{\mu}m$, which was in an clinically acceptable range. Premolar impression with a long and narrow shape showed a significantly larger discrepancy than canine and molar impressions. Further work is needed to increase the digitizing performance of the white light scanner for deep and slender impressions.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.167-172
• /
• 2009

The principal objective of this study was to determine the optimum manufacturing conditions of egg white with high foaming property for the production of angel food cakes. The egg whites were desugarized and powdered at predetermined pHs and drying temperatures. The physicochemical properties of the produced cakes were measured and sensory evaluations were conducted on a 9-point scale. The volume and textural properties of cakes produced from spray-dried egg whites did not differ from those of the cakes prepared from the control egg whites. The pH of batter and the specific gravity of foam and batter with egg white powder at pH 6.74/66.5$^{\circ}C$ did not differ from those of the control, whereas the one prepared with commercial powder lost the characteristics of cake to a significant degree. The overall acceptance scores of egg white powder of pH 6.74/66.5$^{\circ}C$ and commercial powder were 6.25 and 2.33 as compared to the control (6.42). These results indicate that the egg white powder that was desugarized, pH-adjusted to 6.74, and dried at 66.5$^{\circ}C$ might be utilized to prepare angel food cakes with the desirable physicochemical and sensory attributes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.8-16
• /
• 2010

An orthogonal frequency division multiplexing (OFDM) system is a special case of multicarrier transmission, where a single data stream is transmitted over a number of lower-rate subcarriers. One of the main reasons to use OFDM is to increase robustness against frequency-selective fading or narrowband interference. However, in the radio systems the distortion introduced by high power amplifiers (HPA's) such as traveling wave tube amplifier (TWTA) considered in this paper, is also critical. Since the signal amplitude of the OFDM system is Rayleigh-distributed, the performance of the OFDM system is significantly degraded by the nonlinearity of the HPA in the OFDM transmitter. In this paper, we propose a simplicial canonical piecewise-linear (SCPWL) model based digital predistorter to compensate for nonlinear distortion introduced by an HPA in an OFDM system. Computer simulation is carried on an OFDM system under additive white Gaussian noise (AWGN) channels with 16-QAM and 64-QAM modulation schemes and modulator/demodulator implemented with 1024-point FFT/IFFT. The simulation results demonstrate that the proposed predistorter achieves significant performance improvement by effectively compensating for the nonlinearity introduced by the HPA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.350-357
• /
• 2010

In this paper, we present an auto-range fast bilateral filter (FBF) for high-dynamic-range (HDR) images, which increases computation speed by using adaptive standard deviations for range filter (RF) of FBF in iCAM06. Many images that cover the entire dynamic range of the scene with different exposure times are fused into one High Dynamic Range (HDR) image. The representative algorithm for HDR image rendering is iCAM06, which is based on the iCAM framework, such as the local white point adaptation, chromatic adaptation, and the image processing transform (IPT) uniform color space. FBF in iCAM06 uses constant standard deviation in RF. So, it causes unnecessary FBF computation in high stimulus range with broad and low distribution. To solve this problem, the low stimulus image and high stimulus image of CIE tri-stimulus values (XYZ) divided by the threshold are respectively processed by adaptive standard deviation based on its histogram distribution. Experiment results show that the proposed method reduces computation time than the previous FBF.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.213-220
• /
• 2012

Purpose: The aim of this study was to determine the repeatability and reproducibility of two dental scanners. Methods: The master die and the stone replicas(Kavo, Germany) were digitized in touch-probe scanner(Incise, Renishaw, UK), white light scanner(Identica, Medit, Korea) to create 3-dimensional surface-models. The number of points in the point clouds from each reading were calculated and used as the CAD reference model(CRM). Discrepancies between the points in the 3-dimensional surface models and the corresponding CRM were measured by a matching-software(Power-Inspect R2, Delcam Plc, UK). The t-student test for one samples were used for statistical analysis. Results: The reproducibility of both scanner was within $3{\mu}m$, based on mean value. The mean value between measurements made directly on the touch probe scanner digital models and those made on the white light scanner digital models was $2.20-2.90{\mu}m$, and was statistically significant(P<0.05). Conclusion: With respect to adequate data acquisition, the reproducibility of dental scanner differs. Three-dimensional analysis can be applied to differential quality analysis of the manufacturing process as well as to evaluation of different analysis methods.