• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.11-17
• /
• 2003

The new multi-dimensional higher order interpolation scheme called MHIS is developed. Firstly, multi-dimensional TVD condition is derived based on one-dimensional TVD condition. Using multi-dimensional TVD condition, 2nd, 3rd and 5th order MHIS are presented. By help of multi-dimensional TVD condition, it is possible to captured a discontinuity monotonically even in a multi-dimensional flow. It is verified through several test cases that the accuracy and the robustness of MHIS are enhanced in regions of shock discontinuities as well as boundary-layers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.6
• /
• pp.127-132
• /
• 2000

Morphological analysis of wear particles is one of useful methods for machine condition monitoring because it is well reflected in machine driving state. This paper was undertaken to apply to the condition monitoring of hydraulic piston motor. The lubricating wear test was performed under different experimental conditions using the wear test device and wear specimens of the pin on disk type was rubbed in paraffinic base oil by three kinds of lubricating materials, varying applied load, sliding distance. The four shape parameters(50% volumetric diameter, aspect, roundness and reflectivity) are used for morphological analysis of wear particles. The results showed that the four shape parameters of wear particles depend on a kind of the lubricating materials. It was capable of calculating presumed wear volume for three kinds of materials on driving time to foresee as damage condition of lubricating materials.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.585-592
• /
• 2002

Discharge capacity of PBD is the most important factor of specification items to control any product of PBD. There is no standard specification for the PBD. Because the degree of discharge capacity is related to well resistance, install depth, maximum strain etc in the field. Discharge capacity test of PBD, permeability test of filter are conducted using PBD materials used in Korea. This paper proposes the critical discharge capacity for deep PBD under condition of non well resistance based upon their test and theoretical calculation. It was found that discharge capacity more than about 10 ㎤/sec is enough to undergo designing of deep PBD without well resistance.

• Journal of Environmental Science International
• /
• v.28 no.9
• /
• pp.737-749
• /
• 2019

In this study, the sensitivity analysis of hydraulic conductivity and separation distance (distance between injection well and pumping well) was analyzed by establishing a conceptual model considering the hydrogeologic characteristics of facility agricultural complex in Korea. In the conceptual model, natural characteristics (topography and geology, precipitation, hydraulic conductivity, etc.) and artificial characteristics (separation distance from injection well to pumping well, injection rate and pumping rate, etc.) is entered, and sensitivity analysis was performed 12 scenarios using a combination of hydraulic conductivity ($10^{-1}cm/sec$, $10^{-2}cm/sec$, $10^{-3}cm/sec$, $10^{-4}cm/sec$) and separation distance (10 m, 50 m, 100 m). Groundwater drawdown at the monitoring well was increased as the hydraulic conductivity decreased and the separation distance increased. From the regression analysis of groundwater drawdown as a hydraulic conductivity at the same separation distance, it was found that the groundwater level fluctuation of artificial recharge aquifer was dominantly influenced by hydraulic conductivity. In the condition that the hydraulic conductivity of artificial recharge aquifer was $10^{-2}cm/sec$ or more, the radius of influence of groundwater level was within 20 m, but In the condition that the hydraulic conductivity is $10^{-3}cm/sec$ or less, it is confirmed that the radius of influence of groundwater increases sharply as the separation distance increases.

• Korean Journal of Community Nutrition
• /
• v.12 no.4
• /
• pp.426-439
• /
• 2007

The purpose of this study was to investigate the awareness and practice on well-being life and well-being related behaviors, and the various factors affecting well-being related behaviors such as purchasing food materials, food habits, eating out and daily routine activities. A survey was conducted by questionnaire and on a 5-point Likert scale. The subjects of this study were composed of 221 students and their 102 parents who were over 40 years residing in the Ulsan area. The results of this study are summarized as follows: Almost half of the subjects (47.4%) responded that they have good health conditions; to keep a good health condition, 41.2% of the subjects were exercising regularly and 20.4% of them kept diet control. In regard to the meaning of well-being, 66.6% of the subjects thought it is the lifestyle for physical and mental richness (children: 70.6%, parents: 57.8%). 30.3% of the subjects answered that the most important part of well-being was food related. The importance order was mental richness, food related things, physical health for children, and for the parents, it was food related things, physical health, mental richness. Most of population (45.8%) answered that they have a willingness for the pursuit of a well-being life. Among the well-being related behaviors, 69.7% of subjects have purchased items (children: 61.5%, parents: 87.3%). 37.2% of the subjects have acquired information from TV. The average well-being practice score was $61.01{\pm}10.36$. Children's scores were significantly lower than the parent's scores (p < 0.001). And the average practice score of 'purchasing food materials,' 'eating out,' 'food habits,' 'daily routine activities' were $15.3{\pm}3.3,\;15.5{\pm}3.1,\;16.8{\pm}3.3$ and $13.4{\pm}3.5$, respectively. Among five types of purchasing food materials, 'purchasing domestic agricultural food' was greatest ($3.64{\pm}0.91$) and 'purchasing of organic or low agricultural chemical food products' was lowest ($3.15{\pm}0.91$). In regard to food habits, 'eating rice and bread made of mixed grains' was greatest ($3.46{\pm}1.12$) and 'eating uncooked food or zen food' was lowest ($2.46{\pm}0.99$). The practice scores were significantly affected by gender (p < 0.05), monthly income (p < 0.01), educational level (p < 0.01), presence of disease (p < 0.05), subjective health condition (p < 0.05), well-being awareness (p < 0.001) and concern with well-being (p < 0.001). Well-being awareness scores and well-being practice scores are related positively. Therefore various programs in well-being education should be necessary in order to boost the authentic perceptions of well-being and well-being oriented behaviors in any socioeconomic situation, such as different generations; industrial companies producing well-being goods for consumer's needs and satisfaction; and government and local community create various conditions for well-being oriented behavior.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.159-166
• /
• 2000

Non-destructive out-hole tests, impact-echo and impact-response are widely applied to evaluate integrity of drilled shafts. In these tests, vibratory motions of drilled shafts are interpreted, which induced by impacts on the shaft head. In applying the tests to evaluating integrity of shaft, it has been attended whether the tests have resolutions enough to distinguish existence of slime at between the shaft end and a bearing soil deposit. To distinguish existence of slime by tests, modes of shaft vibrations need to be reasonably interpreted, which generally vary according to a shaft boundary condition such as, a free-free or a free-fixed condition. The boundary condition of a shaft is, however, found to be significantly affected by stiffness of soil deposits around shaft as well as penetration depths of shaft into a bearing soil deposit. Thus, these effects on the boundary condition of a shaft should be considered reasonably in interpreting test results to decide the existence of slime. To investigate the effects, in this study, vibratory motions of shafts constructed in various soil conditions and end penetration depths are examined analytically. Based on the studies, variations of boundary condition are characterized in terms of soil stiffness contrast between a shaft perimeter and a shaft end, and also the ratio of a penetration depth to a shaft length. The results can be applied to verify the applicability of tests to identify the slime.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.1
• /
• pp.25-37
• /
• 2008

When livestock facilities in Korea have been changed larger and denser, rearing conditions have been getting worse and the productivity of animal production have been decreased. Especially in the cold season, the minimized ventilation has generally been operated to save energy cost in Korea resulting in very poor environmental condition and high mortality. While the stability, suitability, and uniformity of the rearing condition are the most important for high productivity, the ventilation configuration is the most important to improve the rearing condition seasonally. But, it is so difficult to analyze the internal air flow and the environmental factors by conducting only field experiment because the weather condition is very unpredictable and unstable as well as the structural specification can not be easily changed by the researchers considering cost and labor. Accordingly, an aerodynamic computer simulation was adopted to this study to overcome the weakness of conducting field experiment and study the aerodynamic itself. It has been supposed that the airflow is the main mechanism of heat, mass, and momentum transfers. To make the simulation model accurately and actually, simplified pig models were also developed. The accuracy of the CFD simulation model was enhanced by 4.4 % of errors compared with the data collected from field experiments. In this paper, using the verified CFD model, the CFD computed internal rearing condition of the mechanically ventilated pig house were analyzed quantitatively as well as qualitatively. Later, this developed model will be computed time-dependently to effectively analyze the seasonal ventilation efficiency more practically and extensively with tracer gas decay theory.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.655-661
• /
• 2005

For a hydro power plant project, the headrace tunnel having a finished diameter of 3.3m was constructed in volcanic rocks with well-developed vertical joint and high groundwater table. The intake facility was located 20.3 km upstream of the powerhouse and headrace tunnel of 20 km in length and penstock of 440 m in height connected the intake and the powerhouse. The typical caldera lake, Lake Toba set the geology at the site; the caving of the ground caused tension cracks in the vertical direction to be developed and initial stresses at the ground to be released. High groundwater table(the maximum head of 20 bar) in the area of well-connected vertical joints delayed the progress of tunnel excavation severely due to the excessive inflow of groundwater. The excavation of tunnel was made using open-shield type TBM and mucking cars on the rail. High volume of water inflow raised the water level inside tunnel to 70 cm, 17% of tunnel diameter (3.9 m) and hindered the mucking of spoil under water. To improve the productivity, several adjustments such as modification of TBM and mucking cars and increase in the number of submersible pumps were made for the excavation of severe water inflow zone. Since the ground condition encountered during excavation turned out to be much worse, it was decided to adopt PC segment lining instead of RC lining. Besides, depending on the conditions of the water inflow, rock mass condition and internal water pressure, one of the invert PC segment lining with in-situ RC lining, RC lining and steel lining was applied to meet the site specific condition. With the adoption of PC segment lining, modification of TBM and other improvement, the excavation of the tunnel under severe groundwater condition was successfully completed.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.286-289
• /
• 1991

We simulated ion implantation and annealing condition of 1 ${\mu}m$ CMOS device using process simulator, SUPREM-II. In this simulation, optimal condition of ion implantation for symmetric threshold voltage determination of PMOS and NMOS region, junction depth and sheet resistance of source/drain region, impurity profile of each region are investigated. Ion implantation dose for 3 ${\mu}m$ N-well junction depth and symmetric threshold voltage of $|0.6|{\pm}0.1$ V were $1.9E12Cm^{-2}$(for phosphorus), $1.7E122Cm^{-2}$(for boron) respectively. Also annealing condition for dopant activation are examined about $900^{\circ}C$, 30 minutes. After final process step, N-well junction, P+ S/D junction and N+ S/D junction depth are calculated 3.16 ${\mu}m$, 0.45 ${\mu}m$ and 0.25 ${\mu}m$ respectively.

• Tribology and Lubricants
• /
• v.24 no.3
• /
• pp.111-121
• /
• 2008

An integrated in-line oil monitoring detector assigned for continuous in situ monitoring multiple parameters of oil performance for predicting economically optimal oil change intervals and equipment condition control is presented in this study. The detector estimates oil deterioration based on the information about chemical degradation, total contamination, water content of oil and oil temperature. The oil oxidation is estimated by "chromatic ratio", total contamination is measured by the changes in optical intensity of oil in three optical wavebands ("Red", "Green" and "Blue") and water content is evaluated as Relative Saturation of oil by water. The detector is able to monitor oils with low light absorption (hydraulic, transformer, turbine, compressor and etc. oils) as well as oils with rather high light absorption in visible waveband (diesel and etc. oils). In a case study that the detector is applied to a diesel engine oil, it is found that the detector provides good results on oil chemical degradation as well as soot concentration.