• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.115-117
• /
• 2002

In general, it is supposed that load characteristics of high and low voltage distribution line are always coincidence. But in practical distribution system, voltage variation characteristics of high and low voltage distribution line are not same. Then in this paper, we proposes a voltage regulation method considering load variation characteristics of high and low voltage distribution line in distribution system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1227-1229
• /
• 2000

The output voltage of UPS must not vary according to the load variation But the output voltage varies due to the load variation when a PI voltage regulator is used which has inherently a static state error. This paper presents a static-error-free digital PID voltage regulator for an UPS inverter to overcome additionally the voltage unbalance problem in three Phase system as well as the above problem.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권2호
• /
• pp.184-188
• /
• 2014

There is a trade-off between read stability and writability under a full-/half-select condition in static random access memory (SRAM). Another trade-off in the minimum operating voltage between the read and write operation also exists. A new peripheral circuit for SRAM arrays, called a variation sensor, is demonstrated here to balance the read/write margins (i.e., to optimize the read/write trade-off) as well as to lower the minimum operation voltage for both read and write operations. A test chip is fabricated using an industrial 45-nm bulk complementary metal oxide semiconductor (CMOS) process to demonstrate the operation of the variation sensor. With the variation sensor, the word-line voltage is optimized to minimize the trade-off between read stability and writability ($V_{WL,OPT}=1.055V$) as well as to lower the minimum operating voltage for the read and write operations simultaneously ($V_{MIN,READ}=0.58V$, $V_{MIN,WRITE}=0.82V$ for supply voltage $(V_{DD})=1.1V$).

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.72-77
• /
• 2015

Three-level diode clamped multilevel inverter, generally known as neutral point clamped (NPC) inverter, has an inherent problem causing neutral point (NP) potential variation. Until now, the NP potential problem of variation has been investigated and lots of solutions have also been proposed. This paper presents a neutral point voltage control technology using the anti-windup PI controller and offset technology of PWM (Pulse Width Modulation) to control the variation of NPC 3-phase three-level inverter neutral point voltage. And the proposed algorithm is tested and verified using a PLL (Phase Locked Loop) in order to synchronize the phase voltage from the line voltage of grid. It significantly improves the voltage balancing under a solar fluctuation conditions of the inverter. Experimental results show the good performance and effectiveness of the proposed method.

• 전기의세계
• /
• 제17권1호
• /
• pp.21-31
• /
• 1968

The variation of the voltage has been known to be harmful in the sound operation of motors. It also results in the variation in slip. If the voltage and slip are known, every characteristics of motors can be determined. This paper, therefore, analyzed numerically the characteristics of motors by the formula expressed in the function of both slip and voltage, and then satisfactorily compared with the experimental values. A new per-unit method derived in this paper is shown to be easier and simpler than the conventnional one in determining the relative running characteristics. It has also suggested the minimum allowable voltage when voltage below the rated value was applied to the motor. It is expected to apply to the determination of the characteristics under the voltage variation.

• 대한전기학회논문지
• /
• 제35권7호
• /
• pp.278-284
• /
• 1986

Double-diffused metal oxide power semiconductor field effect transistors are used extensively in recent years in various circuit applications. The temperature variation of the drain current at a fixed bias shows both positive and negative resistance characteristics depending on the gate threshold voltage and gate-to source bias votage. In this paper, the decision method of the gate crossover voltage by the temperature variation and a new method to determine the gate threshold voltage graphecally are presented.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권5호
• /
• pp.278-282
• /
• 2000

This paper investigated that resonant frequencies of microstrip patch antenna were tunable when piezoelectric materals were used as the antenna substrates. The resonant frequencies of the antenna using the piezoelectric substrate were able to be controlled by applied voltage. The frequency variation of the air gap antenna was 16MHz when the voltage variation was 13[KV/cm], and the frequency variation of microstrip patch antenna made of $LiNbO_3$ substrate was 11MHz when voltage variation was 480[V/cm].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.962-965
• /
• 1997

This paper analyzes the effect of momentary voltage variation caused by auto-reclosing. The occurrence mechanism of momentary voltage variation caused by auto-reclosing is explained. Through the statistical analysis of the actual operation data over 4 years in a model substation the conventional reliability and the power Quality which considered momentary voltage variation are compared. This paper resents the toleration curves of each load types to investigate the affected degree of the loads carrying out the experiment.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.85-92
• /
• 2009

This paper studies the method to predict voltage variation that can be presented in the case of operating a small-sized wind turbine in grid connection to the isolated small-sized power system. In order to do this, it makes up the simplified simulation model of the existing power plant connected to the isolated system, load, transformer, and wind turbine on the basis of PSCAD/EMTDC and compares them with the operating characteristics of the actual established wind turbine. In particular, it suggests a simplified model formed with equivalent impedance of the power system network including the load to analytically predict voltage variation at the connected point. It also confirms that the voltage variation amount calculated by the suggested method accords well with both simulation and actually measured data. The results can be utilized as a tool to ensure security and reliability in the stage of system design and preliminary investigation of a small-sized grid connected wind turbine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.228-230
• /
• 2008

The response time characteristic of low voltage liquid crystals (LCs) is investigated and a new simulator for low voltage LCs is proposed. In order to enable low voltage operation, it is important to minimize Vth of LCs and variation of pixel voltage caused by dynamic capacitance operation of LC Display. Because dynamic capacitance variation is much larger for low voltage LC operation compared to that of conventional LC material, it is necessary to make a better model for dynamic capacitance operation. A proposed minimizing Vth of LCs and variation of pixel voltage study results through a new constant charge model improve response characteristics for low voltage LCs operation.