• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.149-154
• /
• 2007

This study examines the effect of acoustic excitation using forced coaxial air on the flame characteristics of turbulent hydrogen nonpremixed flames. A resonance frequency was selected to acoustically excite the coaxial air jet due to its ability to effectively amplify the acoustic amplitude and reduce flame length and NOx emissions. Acoustic excitation causes the flame length to decrease by 15 % and consequently, a 25 % reduction in EINOx is achieved, compared to a flame without acoustic excitation. Moreover, acoustic excitation induces periodical fluctuation of the coaxial air velocity, thus resulting in slight fluctuation of the fuel velocity. From phase-lock PIV and OH PLIF measurement, the local flow properties at the flame surface were investigated under acoustic forcing. During flame-vortex interaction in the near field region, the entrainment velocity and the flame surface area increased locally near the vortex. This increase in flame surface area and entrainment velocity is believed to be a crucial factor in reducing flame length and NOx emission in coaxial jet flames with acoustic excitation. Local flame extinction occurred frequently when subjected to an excessive strain rate, indicating that intense mass transfer of fuel and air occurs radially inward at the flame surface.

• 한국정밀공학회지
• /
• 제30권11호
• /
• pp.1211-1216
• /
• 2013

In this study, a dynamic camera actuation system for simultaneous in situ image acquisition is developed to achieve real-time observation of transient liquid flow on a lab-on-a-disk. A disk-type electric circuit, namely circuit-on-a-disk, co-rotated with the lab-on-a-disk improves the dynamic image acquisition ability in terms of a frame rate. The circuit-on-a-disk is comprised of a camera connected with a motor, a microprocessor and a wireless communication module. The camera connected with the motor enables to realize dynamic tracking of a transient flow and real-time image acquisition. The obtained images can be simultaneously transferred by a video/audio transmitter unit to a personal computer. Also, the microprocessor receives signals from the personal computer, and then controls the focusing position of the camera. We are expecting that heaters, sensors, and light sources also can be integrated on the circuit-on-a-disk, and they will enable various functional actuations as well as precise image acquisition.

• East Asian mathematical journal
• /
• 제24권5호
• /
• pp.527-545
• /
• 2008

One of the education purpose of the section "Figures" in the eighth grade is to develop students' deductive reasoning ability, which is basic and essential for living in a democratic society. However, most or middle school students feel much more difficulty or even frustration in the study of formal arguments for geometric situations than any other mathematical fields. It is owing to the big gap between inductive reasoning in elementary school education and deductive reasoning, which is not intuitive, in middle school education. Also, it is very burden for students to describe geometric statements exactly by using various appropriate symbols. Moreover, Usage of the same symbols for angle and angle measurement or segments and segments measurement makes students more confused. Since geometric relations is mainly determined by the measurements of geometric objects, students should be able to interpret the geometric properties to the algebraic properties, and vice verse. In this paper, we first compare and contrast inductive and deductive reasoning approaches to justify geometric facts and relations in school curricula. Convincing arguments are based on experiment and experience, then are developed from inductive reasoning to deductive proofs. We introduce teaching methods to help students's understanding for deductive reasoning in the textbook by using stepwise visualization materials. It is desirable that an effective proof instruction should be able to provide teaching methods and visual materials suitable for students' intellectual level and their own intuition.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.137-141
• /
• 1997

In this study, in order to improve visualization and enhance the ability of the surgeon to perform delicate endoscopic surgery, three dimensional endoscopic system is designed. These 3D systems have our features of stereoendoscopic image processing: real time image capture and retrieve; presentation of left and right image on a single monitor; separable processing of the left and right eye images; coding of the 3D endoscopic video. For 3D endoscopic video coding, three approaches are presented based on interlaced picture structure, side-field format structure, and simulcast technique. Experimental results and performances comparisons are presented and analyzed or these approaches. Digital video coding techniques are presented or 3D endoscopic video sequences by means of an MPEG-2 video coding.

• 공학교육연구
• /
• 제19권4호
• /
• pp.83-88
• /
• 2016

In this paper, we surveyed from students and professors of Hanbat National University to examine the current state of running the introductory engineering design and to derive the direction of future improvements of the subject. A total of 783 students from nine departments and 12 professors who are in charge of the introductory engineering design participated in the present questionnaire evaluation. Outcome categories of the interest in their major and the learning of design theory appears relatively lower than other learning outcomes of the introductory engineering design course. Accordingly, it is determined that the theoretical aspects of designing should be emphasized in performing a team project. The design process, writing and presentation ability, teamwork theory are dealt in more than 70% of the departments, but engineering ethics, patent, visualization education had not been addressed in a number of departments due to their department characteristics. While a lesson outcome of the creativity resulted in the largest for the students, most of the professor feel difficult in increasing the creativity. It is urgent to develope of teaching methods in order to promote the creativity in the introductory engineering design course.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.404-412
• /
• 2017

A centrifugal cyclone dust collecting apparatus includes a hydro cyclone dust collecting apparatus for separating solid or liquid using liquid or suspension as a medium. In this study, the formation mechanism and improvement of air core and inner air layer were confirmed through Particle Image Velocimetry. These results showed that the modified experimental model was designed in the conventional method suitable for the separation of juvenile fish and eggs. The inlet speed of the multi-stage hydrocyclone dust collector, which can increase the inlet velocity and minimize floatage in the turbulence chamber, was increased from 0.15 to 0.30 m/s. As a result, the air core was stably formed, the inner air layer was increased with increasing speed. In addition, the dust collecting efficiency of egg and juvenile fish was 97.8% on average, It can infer that this system confirmed the ability to efficiently collect particles of $40{\mu}m$ or more.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권2호
• /
• pp.157-160
• /
• 2006

Nasotracheal intubation is performed routinely in maxillofacial surgery to optimize visualization of the surgical field. The CaldwellLuc operation is an approach to the maxillary sinus through the labiogingival sulcus and canine fossa. The operation is used to treat chronic maxillary sinusitis, and involves curettage of the mucosa of the maxillary sinus and the creation of an inferior meatal antrostomy. After the operation, a nasal Foley catheter is inserted into the inferior nasal meatus for the discharge of blood and tissue fluid. Then, the nostril is packed with vaseline gauze. Before the patients awaken, they experience impaired switching from nasal to oral breathing. Pulmonary edema can result from excessive negative intrathoracic pressure caused by acute airway obstruction in patients breathing spontaneously. During anesthesia and sedation, airway obstruction can occur at the levels of the pharynx and larynx. Even in patients who are awake, alteration in the ability to change the breathing route from nasal to oral may affect breathing in the presence of an airway obstruction, causing this catastrophic event. We experienced a case in which acute pulmonary edema resulted from acute airway obstruction triggered by the patient's inability to switch the breathing route from nasal to oral during emergence from anesthesia.

• Journal of Ship and Ocean Technology
• /
• 제8권4호
• /
• pp.1-9
• /
• 2004

High lifting devices used for control purposes have received much attention in the marine field. Hydrofoils for supporting the hull, roll stabilizer fins for developing the motion damping performance, rudders for maneuverability are the well-known devices. In the present study, the ability of the rudder with flap to produce high lift was analyzed. The boundary layer control, one of the flow control techniques, was adopted. Especially, to build the blown flap, a typical and representative type of a boundary layer control, a flapped rudder was designed and manufactured so that it could eject the water jet from the gap between the main foil and the flap to the flap surface tangentially. And it was tested in the towing tank. Simultaneously, to know the information about the 2-dimensional flow field, a fin model with similar characteristics as the rudder model applicable for the motion control was made and tested in the cavitation tunnel. In addition, local flow measurements were carried out to obtain physical information, for example, a surface pressure measurement and flow visualization around the flap. And CFD simulation was used to obtain information difficult to collect from the experiment about the 2-dimensional flow.

• 대한디지털의료영상학회논문지
• /
• 제5권1호
• /
• pp.26-31
• /
• 2002

본 연구의 목적은 복강경 수술환경에서 2D와 3D 내시경 비디오 영상이 수술에 미치는 영향을 평가하기 위한 연구이며, 이를 위해 3D 내시경 시스템을 구성하고 성능 평가를 수행하였다. 결과적으로 본 연구에서 제안한 3D 방식이 기존의 전자셔터 방식에 의한 3D 영상에 비해 화질과 시야각이 우수하며, 2종류의 모의 수술 실험 비교를 한 결과, 제안한 방식의 디지털 영상을 이용하는 경우가 성능이 가장 우수함을 정량적으로 확인하였다.

• 정보처리학회논문지A
• /
• 제10A권2호
• /
• pp.157-164
• /
• 2003

최근 볼륨 그래픽스가 의료 영상의 해석 도구로서 주목을 받아 오고 있다. 볼륨 그래픽스에서는 가시화를 위하여 복셀로 정의된 물체가 필요하다. 이 때문에 기하학적인 방법으로 정의한 다각형 및 곡면을 복셀 기반의 물체로 변환시키는데 이를 복셀화(voxelization)라고 한다. 기하학적인 물체를 복셀화하면 기하학적 물체 데이터를 샘플링 데이터와 함께 단일화된 방법으로 볼륨 렌더링할 수 있다. 본 논문에서는 큐브의 단면을 이용한 복셀화의 한 기법을 제안한다. 그리고 개인용 컴퓨터 환경에서 이 기법을 구현한 후에 단순한 기하학적인 데이터를 이용해서 평가하여 논리적인 타당성을 조사한다. 이 기법은 변환된 복셀로부터 정확한 법선 벡터를 계산할 수 있고 복셀간에 구멍(hole)이 발생하지 않고 다해상도(multi-resolution) 표현이 가능한 특성을 가지고 있다.