• 한국가시화정보학회지
• /
• 제10권3호
• /
• pp.42-47
• /
• 2012

Experimental data for the flows in a mixing tank with a bottom agitator are useful for the validation of CFD commercial code. A hybrid volume PIV measurement technique was constructed to measure the flows inside of the mixing tank. The measurement system consists of three cameras. An agitator was installed at the bottom of the tank and it rotates clockwise and counterclockwise. Using the constructed measurement system, instantaneous vector fields were obtained. A phase averaging technique was adopted for the measured instantaneous three-dimensional velocity vector fields. Turbulent properties were evaluated from the instantaneous vector fields.

• 대한수학회보
• /
• 제26권1호
• /
• pp.43-46
• /
• 1989

In this paper, we are concerned with the pointwise-hypoellipticity (see Definition 2.1) of an m-dimensional Frobenious Lie algebra L of analytic complex vector fields in somel open subset .ohm. of $R^{m+1}$. That is, L is a set of complex vector fields in .ohm. with (real-) analytic coefficients satisfying: (A) each point of .ohm. has an open neighborhood in which L is generated by m linearly independent elements of L; (B) L is closed under the commutation bracket [A, B]. The pointwise-analytic hypoellipticity of L is completely characterized by M.S. Baouendi and F. Treves in [1]. Here, we shall prove that if L is hypoelliptic at a point then it must be analytic hypoelliptic in a full neighborhood of the same point. When the coefficients are $C^{\infty}$, hypoellipticity of L was discussed in [2].2].

• 한국멀티미디어학회논문지
• /
• 제12권11호
• /
• pp.1623-1628
• /
• 2009

본 논문에서는 2차원 벡터 필드의 탄젠트 곡선을 계산하는 효율적이고 정확한 방법을 제안한다. 탄젠트 곡선 상의 정확한 값을 구하지 못하고 단지 탄젠트 곡선의 근사치를 구하는 Runge-Kutta 같은 종래의 방법과는 달리 여기서 제안한 방법은 2D 삼각형에서 벡터 필드가 선형적으로 변한다는 가정 하에 탄젠트 곡선상의 정확한 값을 계산한다. 새로 제안한 방법은 벡터 필드가 2D 삼각형에서 선형적으로 변한다고 가정한다. 우선 이 방법은 2D에서 사각형 셀을 2개의 삼각형 셀로 분해하는 것을 요구한다. 임계점은 각 삼각형의 간단한 선형 시스템을 풀어서 간단하게 구할 수 있다. 이 방법은 이전 삼각형에서 계산된 탄젠트 곡선상의 점들을 기초로 다음 삼각형에서 탄젠트 곡선상의 계속적인 점들을 생성함으로써 출구 점을 구한다. 탄젠트 곡선상의 점들은 각 삼각형의 명시해에 의해서 계산되었기 때문에 새로운 방법은 2D 벡터 필드를 가시화하는데 정확한 위상을 마련한다.

• Journal of Computational Design and Engineering
• /
• 제2권2호
• /
• pp.88-95
• /
• 2015

Recently, fiber composite materials have been attracting attention from industry because of their remarkable material characteristics, including light weight and high stiffness. However, the costs of products composed of fiber materials remain high because of the lack of effective manufacturing and designing technologies. To improve the relevant design technology, this paper proposes a novel simulation method for deforming fiber materials. Specifically, given a 3D model with constant thickness and known fiber orientation, the proposed method simulates the deformation of a model made of thick fiber-material. The method separates a 3D sheet model into two surfaces and then flattens these surfaces into two dimensional planes by a parameterization method with involves cross vector fields. The cross vector fields are generated by propagating the given fiber orientations specified at several important points on the 3D model. Integration of the cross vector fields gives parameterization with low-stretch and low-distortion.

• 대한수학회보
• /
• 제37권2호
• /
• pp.229-247
• /
• 2000

This paper is concerned with the impulsive Cauchy problem where the control function u is a possibly discontinuous vector-valued function with finite total variation. We assume that the vector fields f, $g_i$(i=1,…, m) are dependent on the time variable. The impulsive Cauchy problem is of the form x(t)=f(t,x) +$\SUMg_i(t,x)u_i(t)$, $t\in$[0,T], x(0)=$\in\; R^n$, where the vector fields f, $g_i$ : $\mathbb{R}\; \times\; \mathbb{R}\; \longrightarrow\; \mathbb(R)^n$ are measurable in t and Lipschitz continuous in x, If $g_i's$ satisfy a condition that $\SUM{\mid}g_i(t_2,x){\mid}{\leq}{\phi}$ $\forallt_1\; <\; t-2,x\; {\epsilon}\;\mathbb{R}^n$ for some increasing function $\phi$, then the imput-output function can be continuously extended to measurable functions of bounded variation.

• Kyungpook Mathematical Journal
• /
• 제52권1호
• /
• pp.49-59
• /
• 2012

In this article, using the example of C. Camci([7]) we reconfirm necessary sufficient condition for a slant curve. Next, we find some necessary and sufficient conditions for a slant curve in a Sasakian 3-manifold to have: (i) a $C$-parallel mean curvature vector field; (ii) a $C$-proper mean curvature vector field (in the normal bundle).

• 대한수학회지
• /
• 제54권4호
• /
• pp.1163-1173
• /
• 2017

In this paper, we introduce the condition (I) (cf. Section 2) and prove that there is no nontrivial tangential holomorphic vector field of a certain hypersurface of infinite type in ${\mathbb{C}}^2$.

• 대한수학회논문집
• /
• 제9권2호
• /
• pp.393-400
• /
• 1994

Let M(f,η,ξ,g) be a (2m ＋ 1)-dimensional Sasakian manifold with soldering form dp ∈ ΓHom(Λ/sup q/TM, TM) (dp: canonical vector-valued 1-form) where f,η,ξ and g are the (1,1)-tensor field, the structure 1-form, the structure vector field and the metric tensor of M, respectively.(omitted)

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2001년도 High Temperature Superconductivity Vol.XI
• /
• pp.6-6
• /
• 2001

• 대한수학회지
• /
• 제55권6호
• /
• pp.1321-1336
• /
• 2018

In this paper, we obtain some necessary and sufficient conditions for the Reeb vector field of a trans-Sasakian 3-manifold to be minimal or harmonic. We construct some examples to illustrate main results. As applications of the above results, we obtain some new characteristic conditions under which a compact trans-Sasakian 3-manifold is homothetic to either a Sasakian or cosymplectic 3-manifold.