• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.33-48
• /
• 2018

In this paper, we characterise the joint interference alignment and power allocation strategies for a K-user multicell multiple-input multiple-output (MIMO) Gaussian interference channel. We consider a MIMO interference channel with a blind interference alignment through staggered antenna switching on the receiver. We explore the power allocation and the feasibility condition for cooperative cell-edge (CE) mobile users (MUs) by assuming that the channel state information is unknown. The new insight behind the transmission strategy of the proposed scheme is premeditated (randomly generated transmission strategy) and partial cooperative CE MUs, where the transmitter is equipped with a conventional antenna, the receiver is equipped with a reconfigurable multimode antenna (staggered antenna switching pattern), and the receiver switches between preset T modes. Our proposed scheme assists and aligns the desired and interference signals to cancel the common interference signals, since the received signal must have a corresponding independent signal subspace. The sum capacity for a K-user multicell MIMO Gaussian interference channel with reconfigurable multimode antennas is completely characterised.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1040-1048
• /
• 2009

This paper proposes an auto flesh tone balance algorithm for the picture that is taken for people. General white balance algorithms bring neutral region into focus. But, other objects can be basis if its spectral reflectance is known. In this paper the basis for white balance is human face. For experiment, first, transfer characteristic of image sensor is analyzed and camera output RGB on average face chromaticity under standard illumination is calculated. Second, Output rate for the image is adjusted to make RGB rate for the face photo area taken under unknown illumination RGB rate that is already calculated. Input tri-stimulus XYZ can be calculated from camera output RGB by camera transfer matrix. And input tri-stimulus XYZ is transformed to standard color space (sRGB) using sRGB transfer matrix. For display, RGB data is encoded as eight-bit data after gamma correction. Algorithm is applied to average face color that is light skin color of Macbeth color chart and average color of various face colors that are actually measured.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.336-343
• /
• 1995

The Self Tuning Regulator(STR) method which is an approach of adaptive control theory, is ap-plied to design the fully automatic power controller of the nonlinear reactor model. The adaptive control represent a proper approach to design the suboptimal controller for nonlinear, time-varying stochastic systems. The control system is based on a third­order linear model with unknown, time-varying parameters. The updating of the parameter estimates is achieved by the recursive extended least square method with a variable forgetting factor. Based on the estimated parameters, the output (average coolant temperature) is predicted one-step ahead. And then, a weighted one-step ahead controller is designed so that the difference between the output and the desired output is minimized and the variation of the control rod position is small. Also, an integral action is added in order to remove the steady­state error. A nonlinear M plant model was used to simulate the proposed controller of reactor power which covers a wide operating range. From the simulation result, the performances of this controller for ramp input (increase or decrease) are proved to be successful. However, for step input this controller leaves something to be desired.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.4
• /
• pp.121-128
• /
• 2018

A Korean morphological analyzer adopts sequence-to-sequence (seq2seq) model, which can generate an output sequence of different length from an input. In general, a seq2seq based Korean morphological analyzer takes a syllable-unit based sequence as an input, and output a syllable-unit based sequence. Syllable-based morphological analysis has the advantage that unknown words can be easily handled, but has the disadvantages that morpheme-based information is ignored. In this paper, we propose a reranking model as a post-processor of seq2seq model that can improve the accuracy of morphological analysis. The seq2seq based morphological analyzer can generate K results by using a beam-search method. The reranking model exploits morpheme-unit embedding information as well as n-gram of morphemes in order to reorder K results. The experimental results show that the reranking model can improve 1.17% F1 score comparing with the original seq2seq model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.3
• /
• pp.427-432
• /
• 2021

In this paper, we conduct performance analysis in automatic modulation classification of unknown communication signal to identify its modulation types based on deep neural network. The modulation classification performance was verified using time domain digital sample data of the modulated signal, frequency domain data to which FFT was applied, and time and frequency domain mixed data as neural network input data. For 11 types of analog and digitally modulated signals, the modulation classification performance was verified in various SNR environments ranging from -20 to 18 dB and reason for false classification was analyzed. In addition, by checking the learning speed according to the type of input data for neural network, proposed method is effective for constructing an practical automatic modulation recognition system that require a lot of time to learn.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1379-1394
• /
• 2002

In case of a single input single output (SISO) system with a nonlinear term, a signal compression method is useful to identify a system because the equivalent impulse response of linear part from the system can be extracted by the method. However even though the signal compression method is useful to estimate uncertain parameters of the system, the method cannot be directly applied to a unique system with hysteresis characteristics because it cannot estimate all of the two different dynamic properties according to its motion direction. This paper proposes a signal compression method with a pre-processor to identify a unique system with two different dynamics according to its motion direction. The pre-processor plays a role of separating expansion and retraction properties from the system with hysteresis characteristics. For evaluating performance of the proposed approach, a simulation to estimate the assumed unknown parameters for an arbitrary known model is carried out. A motion platform with several single-rod cylinders is a representative unique system with two different dynamics, because each single-rod cylinder has expansion and retraction dynamic properties according to its motion direction. The nominal constant parameters of the motion platform are experimentally identified by using the proposed method. As its application, the identified parameters are applied to a design of a sliding mode controller for the simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4C
• /
• pp.296-304
• /
• 2005

ATCoP(Abnormal traffic controller based on prediction) is presented to securely support reliable Internet service and to guarantee network survivability, which is deployed in Internet access point. ATCoP is a method to control abnormal traffic that is entering into the network When unknown attack generates excessive traffic, service survivability is guaranteed by giving the priority to normal traffic than abnormal traffic, that is reserving some channels for normal traffic. If the reserved channel number increases, abnormal traffic has lower quality service by ATCoP system and then its service survivability becomes worse. As an analytic result, the proposed scheme maintains the blocking probability of normal traffic on the predefined level in the specific interval of input traffic.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.3
• /
• pp.179-185
• /
• 2013

Photometric observation is one of the most effective techniques for determining the physical characteristics of unknown space objects and space debris. In this research, we examine the change in brightness of the Communication, Ocean, Meteorological Satellite-1 (COMS-1) Geostationary Orbit Satellite (GEO), and compare it to our estimate model. First, we calculate the maximum brightness time using our calculation method and then derive the light curve shape using our rendering model. The maximum brightness is then calculated using the induced equation from Pogson's formula. For a comparison with our estimation, we carried out photometric observation using an optical telescope. The variation in brightness and the shape of the light curve are similar to the calculations achieved using our model, but the maximum brightness shows a slightly different value from our calculation result depending on the input parameters. This paper examines the photometric phenomenon of the variation in brightness of a GEO satellite, and the implementation of our approach to understanding the characteristics of space objects.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.8
• /
• pp.27-35
• /
• 2011

In this paper, performances of the extended QRD-RLS equalizer is analyzed. Since the extended QRD-RLS equalizer is efficiently implemented by systolic array architecture, we analyze performances of this structure with signals of different lengths. By multiplying the frequency responses of the unknown channel and proposed equalizer, we observed the flatness of the overall system function. Through the simulation, it is shown that the performance of the extended QRD-RLS equalizer is remarkably increased with input signals of length 16.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1833-1844
• /
• 2004

A controller is proposed for the robust backstepping control of a class of nonlinear multiple-input multiple-output (MIMO) systems which can be converted to a strict feedback form. The proposed robust backstepping control scheme follows a systematic procedure for the design of control laws and uses time delay estimation (TDE) to estimate the uncertainties such as parameter variations, unknown disturbances, and unmodeled dynamics, etc. The proposed controller can be also applied to nonlinear MIMO systems with unmatched uncertainties. Stability analysis of the closed-loop system which contains the plant and the proposed controller is also studied and hereby a sufficient stability condition for the closed-loop system is proposed. The simulation results show that the control scheme works well with uncertainties and the proposed stability condition is valid. The controller is experimentally verified on a single-link flexible arm to show the effectiveness of the proposed scheme in the complicated systems with uncertainties.