1 |
Lee, M.C. and Aoshima, N., 1989, 'Identification and Its Evaluation of the System with a Nonlinear Element by Signal Compression Method,' Trans. of SICE, Vol. 25, No. 7, pp. 729-736
DOI
|
2 |
Lee, M.C., Park, M.K., Son, K., Yoo, W.S. and Han, M.C., 1999, 'The Development of a Driving Simulator for Reappearance of a Vehicle Motion,' Proc. of the 1999 ICMT, pp. 589-594
|
3 |
Masui, G., Nishikawa, K. and Kiya, H., 2000, '2D Blind System Identification Using Adaptive Algorithm,' Proc. of the 2000 TENCON, Vol. 2, pp. 77-79a
DOI
|
4 |
Slotine, J.J., 1985, 'The Robust Control of Robot Manipulators,' Int. J. of Robotics Research, Vol. 4, No. 4, pp. 49-64
DOI
|
5 |
Nair, R. and Maddocks, J., 1994, 'On the Forward Kinematics of Parallel Manipulators,' International Journal of Robotics Research, Vol. 13, No. 2, pp. 171-188
DOI
ScienceOn
|
6 |
Widrow, B. and Sterns, S.D., 1985, Adaptive Signal Processing, Prentice-Hall, p. 195
|
7 |
Hashimoto, H., Maruyama, K. and Harashima, F., 1987, 'A Microprocessor-Based Robot Manipulator Control with Sliding Mode,' IEEE Trans. Industrial Electronics, Vol. 34, No. 1, pp. 11-18
DOI
ScienceOn
|
8 |
Lebret, G., Liu, K. and Lewis, F.L., 1993, 'Dynamic Analysis and Control of a Stewart Platform Manipulator,' Journal of Robotic Systems, Vol. 10, No. 5, pp. 629-655
DOI
ScienceOn
|
9 |
Stewart, D., 1966, 'A Platform with Six Degree of Freedom,' Proc. of the Institute of Mechanical Engineering, Vol. 180, pp. 317-386
|
10 |
Watton, J., 1989, Fluid Power Systems: Modeling, Simulation, Analog and Microcomputer Control, Prentice Hall, pp. 95-116
|
11 |
Zou, Y. and Chan, S.C., 1999, 'A Robust M-estimate Adaptive Filter for Impulse Noise Suppression,' Proc. of 1999 Int. Conf. on Acoustics, Speech, and Signal Processing, Vol. 4, pp. 1765-1768
DOI
|
12 |
Lee, M.C., Son, K. and Lee, J.M., 1998, 'Improving Tracking Performance of Industrial SCARA Robots Using a New Sliding Mode Control Algorithm,' KSME International Journal, Vol. 12, No. 5, pp. 761-772
|
13 |
Yang, S.Y., Lee, M.C., Lee, M.H. and Arimoto, S., 1998, 'Measuring System for Development of Stroke-Sensing Cylinder for Automatic Excavator,' IEEE Trans. on Industrial Electronics, Vol. 45, No. 3, pp. 376-384
DOI
ScienceOn
|