• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1024-1029
• /
• 2010

The conventional factor of safety as used in geotechnical engineering does not reflect the degree of uncertainty of the relevant parameters. Then in the geotechnical engineering, there have been efforts to reflect the uncertainties of the geotechnical properties through probabilistic analysis. In this study, a practical method for calculation the second moment reliability index using the optimization tool of a spreadsheet software is introduced. And this methodology was proposed by Low, B. K.(1996). The method is based on the perspective of an ellipsoid that just touches the failure surface in the original space of the variables. The method is applied to vertical drains(PVD) and compared with th result of Monte Carlo Simulation method.

• 제어로봇시스템학회논문지
• /
• 제9권6호
• /
• pp.425-434
• /
• 2003

The disturbance observer(DOB) has been widely used in high speed and high precision motion control applications and the characteristics of DOB have been investigated in depth. Though most of DOB's have been implemented as the discrete-time form in digital devices, we are still short of the researches on discrete-time DOB (DDOB) in spite of rich references on continuous-time DOB. In this paper, we discuss about the disturbance rejection property and measurement noise effect of discrete-time DOB. Especially, we will focus on revealing the role of sampling time in designing the discrete-time DOB and show the validity of analysis through simulations and experiments for optical disk drive systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.684_685
• /
• 2009

A digital sampling algorithm that uses a two high resolution integrating Voltmeters which are synchronized by Phase Lock Loop (PLL) time clock for accurately measuring the parameters, active and reactive power, for sinusoidal power measurements is presented. The PLL technique provides high precision measurements, root mean square (rms), phase and complex voltage ratio, of the AC signal. The system has been designed to be used at the Korean Research Institute of Standards and Science (KRISS) as a reference power standard for electrical power calibrations. The test results have shown that the accuracy of the measurements is better than $10 {\mu}W/VA$ and the level of uncertainty is valid for the power factor range zero to 1 for both lead and lag conditions. The system is fully automated and allows power measurements and calibration of high precision wattmeters and power calibrators at the main power frequencies 50 and 60 Hz.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.672-675
• /
• 1995

Because of a sudden growth of the research of fatigue failure, recent machines or structures have been designed by damage tolerance design in many fields. Consequently, it is the most primary factor to clarity the specific character of fatique failure in the design of machines or structures considering reliability. A statistical analysis is required to analyze the outcome of an experiment or a life estimate by reason of that fatigue failure contains lots of random elements. Reliability analysis which has tukenn the place of the existing analyses in the consideration of the uncertainty of a material, is a very efficient way. Even reliability analysis, however, is not a perfect way to analyses the uncertainties of all the materials. This thesis would refer to a newly conceived data analysis that the coefficient of a system could cause the ambiguity of the relationship of an input and output.

• 센서학회지
• /
• 제17권3호
• /
• pp.188-194
• /
• 2008

For the accurate calibrations of thermometers at low temperatures, triple points of oxygen and argon have been realized using sealed-type triple point cells. The triple points were realized with both adiabatic and continuous heating methods. The resistance of three capsule-type standard platinum resistance thermometers were measured at the triple points of oxygen, argon, mercury and water for the calibrations of these thermometers in the range from $-220^{\circ}C$ to $0.01^{\circ}C$. The extended uncertainty, with the coverage factor of 2, of the calibration in this range is smaller than 1 mK.

• 한국농공학회논문집
• /
• 제53권6호
• /
• pp.1-6
• /
• 2011

The conventional factor of safety as used in geotechnical engineering does not reflect the degree of uncertainty of the relevant parameters. Then in the geotechnical engineering, there have been efforts to reflect the uncertainties of the geotechnical properties through probabilistic analysis. In this study, a practical method for probabilistic analysis using the Hasofer-Lind reliability index is introduced. The method is based on the perspective of an ellipsoid that just touches the failure surface in the original space of the variables. The method is applied to prefabricated vertical drains (PVD) and compared with the result of Monte Carlo Simulation method.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.27-29
• /
• 2017

Container terminals in Northern Vietnam have recorded an impressive development in recent years. This development, however, also raises a fierce competition among local container terminals to attract customers. Beside the handling charges, the vessels' waiting cost is also an important factor that drive the opinion of users in choosing appropriate terminal. This research plans to estimate the waiting cost in different container terminals in Northern Vietnam by building regression equation that describe the relationship between the rate of throughput/capacity and waiting cost/TEU. Queuing theory with the application of Poisson distibution is used to estimate the waiting time of arrival vessels and uncertainty theory is applied to estimate the vessel's daily expenses. Previous studies suggested two different formation of the equation and according to the research results, cubic equation is more suitable in the given case. The research results are also useful for further research which require calculation of waiting cost per TEU in each container terminal in Northern Vietnam.

• 상하수도학회지
• /
• 제20권3호
• /
• pp.357-366
• /
• 2006

In order to compute pressure variation for a water distribution system, an expression for the friction factor as a function of Reynolds number and the relative roughness needs to be properly incorporated in computational algorithm. Considering Moody s friction variation, Developed Unsteady Network Analyzer (UNA) has been modified to match computational results with EPANET 2.0. Substantial improvement can be found in the application of Improved UNA to both an hypothetical pipeline network and a real system located in Ulsan City. Random number generator is employed to represent the uncertainty of water use in real pipeline network. Comparisons of application between EPANET 2.0 and improved UNA 2.0 indicate advantages and potentials of this approach.

• 한국학교ㆍ지역보건교육학회지
• /
• 제14권1호
• /
• pp.25-36
• /
• 2013

Objectives: The study was performed to investigate job-seeking stress for university students who have a major in healthcare. Methods: For the analysis, 10 fourth-year students who are willing to get a job were interviewed. Interviews were conducted from October 2011 to November 2011 for 2 weeks. The data were collected with semi-structured open-ended questions and analysed by the method of Consensual Qualitative Research(CQR). Results: The main reasons for the job-seeking stress for students were insufficient preparation for getting a job, uncertainty, anxiety, pressure, and age. A reinforcing factor for stress was family. Conclusions: Universities should provide educational, psychological, and economic supports to job-seeking students majoring healthcare because of their relatively fewer opportunities for getting a job compared to those who have a major in non-healthcare.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.569-572
• /
• 1996

Explicit state-space formulate for an H$_{.inf}$ based two-degrees-of-freedom robust controller are derived in discrete-time. The controller provides robust stability against coprime factor uncertainty, and a degree of robust performance in the sense of making the closed-loop system match a prespecified reference model. It is shown that the controller consists of a plant observer, the chosen reference model, and a generalized state feedback law associated with the plant and model states. The controller structure is shown to be relatively simple and thus may reduce the computational load on the digital control processor.