• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.1045-1050
• /
• 2008

In this paper presents a CMOS RF receiver for IR-UWB wireless communications is presented. The impulse radio based UWB receiver adopts the non-coherent demodulation that simplifies the receiver architecture and reduces power consumption. The IR-UWB receiver consists of LNA, envelop detector, VGA, and comparator and the receiver including envelope detector, VGA, and comparator is fabricated on a single chip using $0.18{\mu}m$ CMOS technology. The measured sensitivity of IR-UWB receiver is down to -70 dBm and the BER $10^{-3}$, respectively at data rate 1 Mbps. The current consumption of IR-UWB receiver except external LNA is 5 mA at 1.8 V.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.309-310
• /
• 2008

In this paper, we propose a novel D-ATR (Differential-Average Transmitted Reference) scheme for UWB (Ultra Wide Band) based on impulse radio. The proposed scheme utilizing differential coding at transceiver, does not cause half loss of data rate unlike the conventional TR (Transmitted Reference) and ATR (Average TR) systems which transmit additional reference signals. In addition, the proposed scheme may provide improved BER (Bit Error Rate) performance by averaging the received reference signals like the conventional ATR. The proposed D-ATR receiver produces the averaged reference template by considering both the detected data bit and the differential coding rule.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.62-67
• /
• 2010

In this paper, an ultra-wideband internal antenna for use in mobile applications is proposed. The proposed antenna has symmetrical bi-arm structures printed on the top and bottom of the substrate, and it occupies a compact area of 10 mm ${\times}$ 10 mm ${\times}$ 1 mm. The designed antenna has an impedance bandwidth from 3 GHz to 12 GHz and near omnidirectional radiation patterns over the frequency band of interest. The group delay between two antennas fabricated using the proposed design is less than 0.8 ns, and the maximum gain variation is about 3.16 dB.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.5
• /
• pp.566-572
• /
• 2014

Recently, indoor navigation has been applied in large convention centers by using wireless sensor networks (WSNs), which provide not only a user's path to be traveled but also orientation and shopping information to increase user's convenience. This paper presents the localization system for estimating relative coordinates without pre-deployment of the reference node based on ultra wide band (UWB) ranging system, which is relatively suitable for indoor localization compared to other wireless communications, and azimuth sensor. The proposed localization system which consists of an azimuth sensor and a mobile node composed of three nodes estimates relative coordinates of the reference node without applying any recursive and time consumption algorithms. Also, in the process of estimating relative coordinates of the reference node, ranging errors are minimized through the proposed technique and the number of nodes can be reduced. Experimental results show the feasibility and validity of the proposed system.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.350-355
• /
• 2017

UWB (Ultra Wide Band) refers to a system with a bandwidth of over 500 MHz or a bandwidth of 20% of the center frequency. It is robust against channel fading and has a wide signal bandwidth. Using the IR-UWB based ranging system, it is possible to obtain decimeter-level ranging accuracy. Furthermore, IR-UWB system enables acquisition over glass or cement with high resolution. In recent years, IR-UWB-based ranging chipsets have become cheap and popular, and it has become possible to implement positioning systems of several tens of centimeters. The system can be configured as one-way ranging (OWR) positioning system for fast ranging and TWR (two-way ranging) positioning system for cheap and robust ranging. On the other hand, the ranging based positioning system has a limitation on the number of terminals for localization because it takes time to perform a communication procedure to perform ranging. To overcome this problem, code multiplexing and channel multiplexing are performed. However, errors occur in measurement due to interference between channels and code, multipath, and so on. The measurement filtering is used to reduce the measurement error, but more fundamentally, techniques for removing these measurements should be studied. First, the TWR based positioning was analyzed from a stochastic point of view and the effects of outlier measurements were summarized. The positioning algorithm for analytically identifying and removing single outlier is summarized and extended to three dimensions. Through the simulation, we have verified the algorithm to detect and remove single outliers.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.15-22
• /
• 2006

In this paper, 1.8V 8-bit 500MSPS Low-power CMOS Digital-to-Analog Converter(DAC) for UWB(Ultra Wide Band) Communication Systeme is proposed. The architecture of the DAC is based on a current steering 6+2 full matrix type which has low glitch and high linearity. In order to achieve a high speed and good performance, a current cell with a high output impedance and wide swing output range is designed. Further a thermometer decoder with same delay time and low-power switching decoder for high efficiency performance are proposed. The proposed DAC was implemented with TSMC 0.18um 1-poly 6-metal N-well CMOS technology. The measured SFDR was 49dB when the output frequency was 50MHz at 500MS/s sampling frequency. The measured INL and DNL were 0.9LSB and 0.3LSB respectively. The DAC power dissipation was 20mW and the effective chip area was $0.63mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1086-1095
• /
• 2007

This paper proposes a novel non-coherent TOA estimation scheme using multiple correlation process on the existence of multiple simultaneously operating piconets (SOPs). Impulse radio-ultra wideband (IR-UWB) based on direct sequence spread spectrum (DSSS) using Gold sequence is employed in order to discriminate each piconet. In order to enhance the characteristic of correlation, this paper presents the method of multiple mask operation (MMO). The time of arrival (TOA) of direct line of sight (DLOS) path is estimated via two step coarse/fine timing detection. To verify the performance of proposed scheme, two distinct channel models approved by IEEE 802.15.4a Task Group (TG) are considered. According to the simulation results, it could conclude that the proposed scheme have performed better performance than the conventional method well even in densed indoor multi-path environment as well as in the existence of multiple SOPs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1128-1135
• /
• 2010

A wireless positioning system using ultra-wideband (UWB) for indoor wireless positioning uses ranging data in order to accurately estimate location. Commonly, ranging uses time of arrival (TOA), time difference of arrival (TDOA) based on arrival time. The most fundamental issue in the ranging for wireless positioning is to obtain clock synchronization among the sensor nodes and to correct an error caused by the relative clock offset from each node. In this paper, we propose ranging and positioning technique using common clock in order to solve both clock synchronization and clock offset problems. To verify the performance of proposed, we simulated ranging and positioning in channel model introduced by IEEE 802.15.4a Task Group and then results show that location estimation is unaffected by clock offset.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.302-313
• /
• 2018

As the demand for indoor location recognition system has been rapidly increased in accordance with the increasing use of smart devices and the increasing use of augmented reality, indoor positioning systems(IPS) using BLE (Bluetooth Lower Energy) beacons and UWB (Ultra Wide Band) have been developed. In this paper, a positioning plate is generated by using trilateration technique based on BLE Beacon and using RSSI (Received Signal Strength Indicator). The resultant value is used to calculate the PDR-based coordinates using the positioning element of the Inertial Measurement Unit sensor, We propose a precise indoor positioning algorithm that combines RSSI and PDR technique. Based on the plate algorithm proposed in this paper, the experiment have done at large scale indoor sports arena and airport, and the results were successfully verified by 65% accuracy improvement with average 2.2m error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.603-605
• /
• 2021

With the expansion of the indoor service-providing robot market and the electrification of automobiles, research on autonomous driving is being actively conducted. In general, in the case of outside, the location is mainly recognized through GPS, and location positioning is performed indoors using technologies such as WiFi, UWB (Ultra-Wide Band), VLP, LiDAR, and Vision. In this paper, we introduce a system for location-positioning using LED lights with different color temperatures in an indoor environment. After installing LED lights in a simulated environment such as a tunnel, it was shown that information about the current location can be obtained through the analysis of chromaticity values according to location. Through this, it is expected to be able to obtain information about the location of the vehicle in the tunnel and the movement of the device in a room such as a warehouse or a factory.