Statement of problems: Stress analysis on implant components of the combined screw- and cement-retained implant prosthesis has not investigated yet. Purpose: The purpose of this study was to assess the load distribution characteristics of implant prostheses with the different prosthodontic retention types, such as cement-type, screw-type and combined type by using 3-dimensional finite element analysis. Material and methods: A 3-dimensional finite element model was created in which two SS II implants (Osstem Co. Ltd.) were placed in the areas of the first premolar and the first molar in the mandible, and three-unit fixed partial dentures with four different retention types were fabricated on the two SS II implants. Model 1 was a cement-retained implant restoration made on two cement-retained type abutments (Comocta abutment; Osstem Co. Ltd.), and Model 2 was a screw-retained implant restoration made on the screw-retained type abutments (Octa abutment; Osstem Co. Ltd.). Model 3 was a combined type implant restoration made on the cement-retained type abutment (Comocta abutment) for the first molar and the screw-retained type abutment (Octa abutment) for the first premolar. Lastly, Model 4 was a combined type implant restoration made on the screw-retained type abutment (Octa abutment) for the first molar and the cement-retained type abutment (Comocta abutment) for the first premolar. Average masticatory force was applied on the central fossa in a vertical direction, and on the buccal cusp in a vertical and oblique direction for each model. Von-Mises stress patterns on alveolar bone, implant body, abutment, abutment screw, and prosthetic screw around implant prostheses were evaluated through 3-dimensional finite element analysis. Results: Model 2 showed the lowest von Mises stress. In all models, the von Mises stress distribution of cortical bone, cancellous bone and implant body showed the similar pattern. Regardless of loading conditions and type of abutment system, the stress of bone was concentrated on the cortical bone. The von-Mises stress on abutment, abutment screw, and prosthetic screw showed the lower values for the screw-retained type abutment than for the cement-retained type abutment regardless of the model type. There was little reciprocal effect of the abutment system between the molar and the premolar position. For all models, buccal cusp oblique loading caused the largest stress, followed by buccal cusp vertical loading and center vertical loading. Conclusion: Within the limitation of the FEA study, the combined type implant prosthesis did not demonstrate more stress around implant components than the cement type implant prosthesis. Under the assumption of ideal passive fit, the screw-type implant prosthesis showed the east stress around implant components.
It has been approximately 40 years since $Br{{\aa}}nemark$ first introduced osseo-integration for implants in the early 1960s. Unlike crown and bridge or denture treatment, implant treatment helps preserve existing bone and improve masticatory functions. Thus, the awareness of implant treatment has grown rapidly among dentists and patients alike in Korea, as it becomes a widely accepted treatment. The following results on patients type and implant distribution were compiled from 1814 implant cases of 640 patients treated at the periodontal dept. of Y University Hospital during 1992 to 2001. 1. There are no dissimilarities between men and women, with patients in their 40,50s accounting for 49% of patients and 56% of implant treatments; the largest share of patients and implant treatments. 2. Mn. posterior area accounted for 59% of implant treatments followed by Mx. posterior area(21%), Mx anterior area(l4%) and Mn anterior area 2%. 3. Partial edentulous patients treated by single crown and bridge-type prosthesis accounted for 98% and fully edentulous patient accounted for the remaining 2% 4. The major cause of tooth loss is periodontal disease, followed by dental caries, trauma and congenital missing. Compared to women, men are more likely to suffer from tooth loss due to periodontal disease. Also, older people are more likely to suffer from tooth loss due to periodontal disease rather than dental caries. 5. The distribution of bone quality for maxillae was 52% for type III, followed by 23% for type II, 20% for type IV and 0% for type I. As for mandible, the distribution was 52% for type II, followed by 37% for type III, 7% for type IV and 4% for type I. 6. The distribution of bone quantity for maxillae was 49% for type C, followed by 34% for type B, 14% for type D, 3% for type A, and 0% for type E. As for mandible, the distribution was 52% for type B, followed by 35% for type C, 6% for type D, 3% for type A and 0% for type E. 7. The majority of implants were those of 10-14mm in length (80%) and regular diameter in width (79%). The results provided us with basic data on patient type, implant distribution, bone condition, etc. We wish that our results coupled with other research data helps assist in the further study for better implant success/survival rates, etc.
The Purpose of this study is to classify the life styles of urban residents in apartments and to find out possible correlation with their preferences on interior ambience.The selected samples were 3,000 residents from Seoul, Pusan, Kwaungju and Cheonan, and 2,750 of them were analyzed.'The results can be summarized as follows.1.The life style patterns were classified into S types, namely organized type, decoration-oriented type, self expression type, practicality-oriented type and fashion-oriented type. 2. Interior image were classified into 4 types, namely characteristic image, contemporary image, classic image and rich image.3. The interior preference was correlated with the life style patterns, such as organizd type preferred to contemporary image, decoration-oriented type preferred to rich image, self expression type preferred to classic image and practicality-oriented type preferred to characteristic type.4. The patterns of life style and the interior preference differed significantly according to the size of apartment and the age of owner.
Sexual reproduction of paramecia have been accomplished through conjugation between individuals which have opposite mating type substances on their cilia when they were starved. Using selfing clone in which mating takes place, I examined whether a mating type change in indicidual cells required new protein and new mRNA synthesis or not and also shether there is a precursor relationship between both of the complementary mating type substances in their synthetic pathway. I found that 1. Mating type change needs new protein(s) and new mRNA synthesis. 2. Mating type substances are synthesized sequentially from mating type XIII to XIV 3. There might be a common precursor pool from which the mating type XIII substnace is synthesized and then complementary mating type XIV is fromed by addition of small group to the mating type XIII substance.
Many kinds of Minty's lemmas show that Minty-type variational inequality problems are very closely related to Stampacchia-type variational inequality problems. Particularly, Minty-type vector variational inequality problems are deeply connected with vector optimization problems. Liu et al. [10] considered vector variational inequalities for setvalued mappings by using scalarization approaches considered by Konnov [8]. Lee et al. [9] considered two kinds of Stampacchia-type vector variational inequalities by using four kinds of Stampacchia-type scalar variational inequalities and obtain the relations of the solution sets between the six variational inequalities, which are more generalized results than those considered in [10]. In this paper, the author considers the Minty-type case corresponding to the Stampacchia-type case considered in [9].
We isolated lactobacillus phage hosting L. casei strains, and examined distribution of the phages and resistance to the sanitary reagent treatment in drainages fo Korea plant. 1) There were Type 1, 11, 111, and 1v of the phage J$_1$in plantdrainages and the order of distribution was Type 1v>Type 11>Type 1>$^1$Type 111. 2) All the phages in plantdrainages were completely removed by spreading the invert soap. 3) Sodium hypochloride, invert soap and dresol were most effective sanitary reagents, and isopropyl alcohol and ethyl alcohol were sanitary reagents.
The study of the muscle fiver composition and the muscle fiver type conversion during unilateral edentulous condition was undertaken in the rostral superficial masseter muscle of the whiter rat. 16 4-week-old male white rats weighting approximately 130gm that crowns of left upper and lower molare were cut intentionally, were divided into 4 groups (one control group and 3 experimental groups). After experimental groups were sacrificed by etherization in 6 days($E_1$), 18 days($E_2$) and 36 days($E_3$) separately, samples of the rostral superficial masseter muscle were obtained bilaterally and the proportion of type I, type IIA, type IIB, and type IIC fibers was determined and counted according to their histochemical activity of myosin ATPase (at pH 9.4, pH 4.6, and pH 4.2)and PAD staining. The obtained results were as follows : 1. The rostral superficial masseter muscle of the white rat contained approximately 47.5% type I fiber and 52.5% type II fiber. 2. Type I/ Type II ratio of molar-present side was increased significantly in the group E2 (18 days group) 3. Type IIA fiber was increased at molar-present side and decreased at molar-absent side in experimental groups.
Body measurement was held for the subjects of Chinese adult males in their 20s through 40s residing in the Ningbo area of Zhejiang Province in order to provide body type information and raise the fit of clothing products for the advancement into the Chinese market. The following sums up the analysis of body types based on body measurement: 1. Seven factors to compose body types were produced from the analysis of males in their 20s, explaining 76.07% of variables and representing 3 types according to cluster analysis. Type 1 was H-b and appeared as much as 32.14%. Type 2, semi X-d, was 40.81%, while Type 3, A-i, had 27.04%. 2. Eight body type composing factors were extracted from the analysis of men in their 30s and 40s. The factors explained 76.77% of all the variables and represented 4 types according to cluster analysis. Type 1, H-d, had the appearance rate of 18.47%; Type 2, H-b, 40.84%; Type 3, Y-i, 27.71%; and Type 4, semi X-s, 11.95%.
The purpose of this study is to suggest the spatial model which can be applied to the tourism farm plan. This study includes : (1) the analysis of existing facilities and activities of 22 tourism farms in Kyunggido and (2) the survey questionnaire about user's attitudes in 3 tourism farms. The results can be summarized as follows : 1) The .Major activities in the tourism farm are the resting/playing based on the natural environment and group meeting. 2) Average area is 17879.4uf (5418 坪). The most frequent facility is restaurant and lodge. 3) It is necessary to propose various types of tourism farm considering both natural conservation and development of rural region and users'various wants. The tourism farms are officially classified into four types Natural education type, Mind and body training type, Weekend farm type, Recreation type. 4) The space for tourism farm is divided into an area of production, and area of processing, and an area of convenience/recreation. 5) It is desired the convenience facilities are located in front of a farm, and the area of production is located at the back of a farm, and simple rest facilities are located all of the farm. 6) The weekend farm model and processing/convenient facility model are proposed in this study. Three types of the weekend farm models are proposed - simple type, composite type, and garden type. Three types of the processing/convenient models are proposed one building type, adjacent building type, and scattered building type.
Journal of the Korean Society of Clothing and Textiles
/
v.19
no.3
/
pp.525-535
/
1995
This study was designed to verify the clothing satisfaction according to product type (jacket vs. pantyhose) and consumer fashion involvement. Research problems were as following; 1. To identify a clothing satisfaction according to product type. 2. To discover which of satisfaction relevant variables has the most influence on clothing satisfaction. 3. To examine the relationship between expectations and discontinuations. 4. To examine the degree of influence of product type and consumer fashion involvement on expectations. The survey was carried out in Pulsar shopping area. The 104 subjects (51 for jacket, 53 for pantyhose) participated in the final analysis. The results of analysis were as following; 1. The main path of clothing satisfaction was that the product type -1 the expectations -1 the perceived performance (-1 the discontinuation) -1 the clothing satisfaction. Those relevant variables explained 62% of clothing satisfaction variance. The most powerful determinant was the perceived performance. 2. For jacket type, the influence of perceived performance appeared to be greater than that of the discontinuation. And the consumer fashion involvement affected the expectations and the discontinuation. 3. For pantyhose type, the consumer fashion involvement divan't affect the expectations. The influence of discontinuation was relatively higher than that of jacket type.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.