• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.551-555
• /
• 2004

The two-transformer full bridge (TTFB) PWM converter has two transformers which act as the output inductor as well as the main transformer, i.e. as the forward and the flyback transformer. Although the doubled leakage inductor of the TTFB makes it easier to achieve the zero-voltage switching (ZVS) of the lagging leg switch along the wide load range, it instigates a serious voltage ringing in the secondary rectifier diodes, which would require the dissipative snubber circuit, cause the serious power dissipation, and increase the voltage stress across those diodes. To overcome these problems, a, new lossless diode-clamp rectifier (LDCR) is employed as the output rectifier, which helps the voltage across rectifier diodes to be clamped on a half the output voltage $(V_o/2)$ or the output voltage $(V_o)$. Therefore, no dissipative snubber for rectifier diodes is needed and a high efficiency as well as low noise output voltage can be realized. The operations, analysis and design consideration of proposed converter are presented in this paper. To verify the validity of the proposed converter, experimental results from a 425W, 385-170Vdc prototype for the plasma display panel (PDP) sustaining power module (PSPM) are presented.

• 한국전자파학회논문지
• /
• 제14권11호
• /
• pp.1170-1175
• /
• 2003

본 논문에서는 Push-Push FET DRO회로의 게이트단에서 이용했던 동일한 유전체 공진기를 드레인단에 추가하면 출력이 증강되는 현상을 이론적으로 해석하였다. 본 해석은 두 개의 마이크로스트립 선로 사이에 위치한 유전체 공진기가 두개의 FET 출력 의 위상차를 고정시켜서 Push-Push FET DRO의 출력이 증가되는 것을 보인다. 이 영향을 Push-Push FET DRO 발진기 제작에서 발생할 수 있는 두 개의 FET 출력회로 사이의 임피던스 차이와 전력결합기의 전기적인 길이 오차를 수정하기 위해 사용할 수 있기 때문에 유전체 공진기가 부가된 Push-Push FET DRO는 발진기 제작에 유용한 구조가 될 것이다.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.673-679
• /
• 2010

Input-series-output-parallel (ISOP) connected DC-DC converters enable low voltage rating switches to be used in high voltage input applications. In this paper, a DSP is adopted to generate digital phase-shifted PWM signals and to fulfill the closed-loop control function for ISOP connected two full-bridge DC-DC converters. Moreover, a stable output current sharing control strategy is proposed for the system, with which equal sharing of the input voltage and the load current can be achieved without any input voltage control loops. Based on small signal analysis with the state space average method, a loop gain design with the proposed scheme is made. Compared with the conventional IVS scheme, the proposed strategy leads to simplification of the output voltage regulator design and better static and dynamic responses. The effectiveness of the proposed control strategy is verified by the simulation and experimental results of an ISOP system made up of two full-bridge DC-DC converters.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.443-452
• /
• 2002

수 백 Watt 급의 통신용 장비 등에 적합하도록 고안된, 직렬 연결된 두 개의 트랜스포머를 갖는 새로운 위상천이 풀 브릿지 컨버터를 제시한다. 제안된 회로의 장점은 넓은 입력 범위를 가지며, 경부하에서도 스위치의 영전압 조건을 보다 쉽게 만족시킬 수 있다는 점, 그리고 작은 출력 변동율을 갖는다는 점 등이다. 뿐만 아니라, 직렬로 연결된 두 개의 트랜스포머가 번갈아 가면서 주 트랜스포머로서의 역할과 출력 인덕터로서의 역할을 함께 수행하므로, 출력측에서는 인덕터없이 필터링이 가능하게 되고, 따라서 고전력밀도의 컨버터를 제작할 수 있게 된다. 모드 해석과 대신호 모델링을 통한 설계식의 유도, 그리고 실험 결과를 보여줌으로써 제안된 컨버터를 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.117-122
• /
• 1998

The recent developments and studies in the framework of output tracking control in the field of robotics that has been studied in the Control Laboratory, are presented. An output controller based on“Hardware-ln-the-Loop Simulation”(HILS) and“Rapid Control Prototyping”(RCP) concepts is developed using dSPACE. These new concepts are shown to be particularly beneficial for manipulator control tasks. In the Elbow manipulator design, there are two kinds of manipulators, namely the serial-drive type and the parallelogram-drive manipulator, The objective of this research is to model the two Elbow manipulators and to implement the proposed controller for manipulator applications. The control goal is to force the manipulator to follow a given trajectory in the given work space. Output controllers of the two elbow manipulators that are based on the model matching control approach have been implemented in two models that represent the robot equations of motion. To reduce the efforts in evaluating the proposed algorithm, a new system configuration method, based on HILS and RCP tools, was suggested to determine the parameters of the integrated dynamic system.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.309-318
• /
• 2015

This study proposes a dual-output single-stage bridgeless single-ended primary-inductor converter (DOSSBS) that can completely remove the front-end full-bridge alternating current-direct current rectifier to accomplish power factor correction for universal line input. Without the need for bridge diodes, the proposed converter has the advantages of low component count and simple structure, and can thus significantly reduce power loss. DOSSBS has two uncommon output ports to provide different voltage levels to loads, instead of using two separate power factor correctors or multi-stage configurations in a single stage. Therefore, this proposed converter is cost-effective and compact. A magnetically coupled inductor is introduced in DOSSBS to replace two separate inductors to decrease volume and cost. Energy stored in the leakage inductance of the coupled inductor can be completely recycled. In each line cycle, the two active switches in DOSSBS are operated in either high-frequency pulse-width modulation pattern or low-frequency rectifying mode for switching loss reduction. A prototype for dealing with an $85-265V_{rms}$ universal line is designed, analyzed, and built. Practical measurements demonstrate the feasibility and functionality of the proposed converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2175-2177
• /
• 1998

Sunlight makes it possible to adjust scale of electric power easily as a electric energy without air pollution. Solar cell to convert the sunlight to the electric energy has DC output which is influenced on temperature and irradiation time. Conversion of DC output from the solar cell to AC is necessary due to the fact that most loads to be used currently are compatible with AC generally. In the present work, Two-phase chopper system with two seperate groups to obtain two identical DC is used to preserve the energy from the solar cell in two battery. They are controlled to be operated around maximum output of the solar cell under the condition of constant voltage. Photovoltaic system with DC${\rightarrow}$AC conversion is also investigated for big capacity and two seperated electric power using two separate inverter.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.68-75
• /
• 2012

This paper presents a study on the driveline output torque estimation using a discrete Kalman filter. The in-situ output shaft torque is first measured by a non-contacting magneto-elastic torque transducer. The linear state-space system equations are first derived and the discrete Kalman filter is designed based on the Kalman filter theory to recover the driveline output torque contaminated by random noises. In addition to using torque measurement, the estimation of the output torque using two angular velocities: the output and wheel, is also conducted. The experimental results show that the discrete Kalman filter can be effective for not only removing the random noise in output torque but also estimating the output torque without torque measurement.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.665-675
• /
• 2019

Renewable energy based on photovoltaic systems is beginning to play an important role to supply power to remote areas all over the world. Owing to the lower output voltage of photovoltaic arrays, high gain DC-DC converters with a high efficiency are required in practice. This paper presents a novel interleaved DC-DC boost converter with a high voltage gain, where the input terminal is interlaced in parallel and the output terminal is staggered in series (IPOSB). The IPOSB configuration can reduce input current ripples because two inductors are interlaced in parallel. The double output capacitors are charged in staggered parallel and discharged in series for the load. Therefore, IPOSB can attain a high step-up conversion and a lower output voltage ripple. In addtion, the output voltage can be automatically divided by two capacitors, without the need for extra sharing control methods. At the same time, the voltage stress of the power devices is lowered. The inrush current problem of capacitors is restrained by the inductor when compared with high gain converters with a switching-capacitor structure. The working principle and steady-state characteristics of the converter are analyzed in detail. The correctness of the theoretical analysis is verified by experimental results.

• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.133-141
• /
• 1994

Conventional competitive learning algorithms compute the Euclidien distance to determine the winner neuron out of all predetermined output neurons. In such cases, there is a drawback that the performence of the learning algorithm depends on the initial reference(=weight) vectors. In this paper, we propose a new competitive learning algorithm that dynamically generates output neurons. The proposed method generates output neurons by dynamically changing the class thresholds for all output neurons. We compute the similarity between the input vector and the reference vector of each output neuron generated. If the two are similar, the reference vector is adjusted to make it still more like the input vector. Otherwise, the input vector is designated as the reference vector of a new outputneuron. Since the reference vectors of output neurons are dynamically assigned according to input pattern distribution, the proposed method gets around the phenomenon that learning is early determined due to redundant output neurons. Experiments using speech data have shown the proposed method to be superior to existint methods.