DOI QR코드

DOI QR Code

DSP Based Series-Parallel Connected Two Full-Bridge DC-DC Converter with Interleaving Output Current Sharing

  • Sha, Deshang (School of Automation, Beijing Institute of Technology) ;
  • Guo, Zhiqiang (School of Automation, Beijing Institute of Technology) ;
  • Lia, Xiaozhong (School of Automation, Beijing Institute of Technology)
  • 투고 : 2010.03.12
  • 발행 : 2010.11.20

초록

Input-series-output-parallel (ISOP) connected DC-DC converters enable low voltage rating switches to be used in high voltage input applications. In this paper, a DSP is adopted to generate digital phase-shifted PWM signals and to fulfill the closed-loop control function for ISOP connected two full-bridge DC-DC converters. Moreover, a stable output current sharing control strategy is proposed for the system, with which equal sharing of the input voltage and the load current can be achieved without any input voltage control loops. Based on small signal analysis with the state space average method, a loop gain design with the proposed scheme is made. Compared with the conventional IVS scheme, the proposed strategy leads to simplification of the output voltage regulator design and better static and dynamic responses. The effectiveness of the proposed control strategy is verified by the simulation and experimental results of an ISOP system made up of two full-bridge DC-DC converters.

키워드

참고문헌

  1. F. Canales, P. Barbosa, and F. C. Lee, "A zero-votage and zero-current switching three-level DC/DC conveters," IEEE Trans. Power. Electron., Vol. 17, No. 6, pp. 898-904, Nov. 2002. https://doi.org/10.1109/TPEL.2002.805609
  2. J. A. Carr, B. Rowden, and J. C. Balda, "A three-level full-bridge zero-volage zero-current switching converter with a simplified switching sheme," IEEE Trans. Power. Electron., Vol. 24, No. 2, pp.329-338, Feb.2009. https://doi.org/10.1109/TPEL.2008.2007211
  3. J. W. Kim, J. S. You, and B. H. Cho, "Modeling , control, and design of input-series-output-parallel-connected converter for high-speed-train power system," IEEE Trans. Ind. Electron., Vol. 48, No. 3, pp.534-544, Jun. 2001.
  4. V. Choudhary, E. Ledezma, R. Ayyanar, and R. M. Button ,"Fault tolerant circuit topology and control method for input-series and outputparallel modular DC-DC converters," IEEE Trans. Power. Electron., Vol. 23, No. 1, pp.402-411, Jan. 2008. https://doi.org/10.1109/TPEL.2007.911845
  5. D. Sha and X. Liao, "Digital control of switch-mode pulsed welding power," in Proc. Energy Conversion and Congress Exposition, ECCE2009, pp. 2746–2749, San Joes, Sep. 2009.
  6. R. Giri, V. Choudhary, R. Ayyanar and N. Mohan, "Common duty ratio control of input-series connected modular DC-DC converters with active input voltage and load-current sharing," IEEE Trans. Ind. Appl., 2006, Vol. 42, No. 4, pp. 1101–1111, Jul./Aug. 2006. https://doi.org/10.1109/TIA.2006.876064
  7. D. Sha, Z. Guo and X. Liao, "Input series connected high frequency DCDC converters with one transformer," in Proc. Applied Power Electronics Conferences, APEC2010, pp. 662–665, Feb. 2010.
  8. R. Ayyanar, R. Giri, and N. Mohan, "Active input-voltage and loadcurrent sharing in input-series and output-parallel connected modular DC-DC converters using dynamic input-voltage reference sheme," IEEE Trans. Power. Electron., Vol. 19, No. 6,pp.1462-1473, Nov. 2004. https://doi.org/10.1109/TPEL.2004.836671
  9. S. P. Natarajan and T. S. Ananadhi, "Control of input series output parallel connected DC-DC converters," Journal of . Power. Electron., Vol. 17, No. 3, pp.265-270, Jul. 2007.
  10. X. Ruan, W. Chen, L. Cheng, C. K. Tse, H. Yan, and T. Zhang,. "Control strategy for input- series- output-parallel converters," IEEE Trans. Ind. Electron., Vol. 56, No. 4, pp. 1174–1185, Apr. 2009, https://doi.org/10.1109/TIE.2008.2007980
  11. Y. Huang, C.K. Tse, and X. Ruan, "Gerneral control considerations for input-series connected DC/DC converters," IEEE Trans. Power. Circuit. Syst.I:Reg. Papers, Vol. 56, No. 6, pp.1286-1296, Jun. 2009. https://doi.org/10.1109/TCSI.2008.2008500
  12. D. Sha, Z. Guo, and X. Liao, "Digital control strategy for input-seriesoutput- parallel modular DC/DC," Journal of Power Electronics, Vol. 10, No. 3, pp. 245–250, May 2010 https://doi.org/10.6113/JPE.2010.10.3.245
  13. P. J. Grbovic, "Master/slave control of input-series-and output-parallelconnected converters: concept for low-cost high-voltage auxiliary power supplies," IEEE Trans. Power. Electron., Vol. 24, No. 2,pp.316–328, Feb. 2009.
  14. K. Siri, M. Willhoff, and K. Conner, "Uniform voltage distribution control for series connected DC-DC converters," IEEE Trans. Power. Electron., Vol. 22, No. 4, pp. 1269–1279, Jul. 2007. https://doi.org/10.1109/TPEL.2007.900555
  15. J. W. Kimball, J. T. Mossoba, and P. T. Krein, "A stabilizing, high performance controller for input-series-output parallel converters," IEEE Trans. Power.Electron., Vol. 23, No. 3, pp.1416-1427, May 2008. https://doi.org/10.1109/TPEL.2008.921151
  16. L. Dixon, "Average current mode control of switching power supply," in Proc.Unitrode Power Supply Design Sem.(SEM700), 1990.

피인용 문헌

  1. Duty Cycle Exchanging Control for Input-Series-Output-Series Connected Two PS-FB DC-DC Converters vol.27, pp.3, 2012, https://doi.org/10.1109/TPEL.2011.2165084
  2. Control Strategy for Input-Series–Output-Parallel High-Frequency AC Link Inverters vol.59, pp.11, 2012, https://doi.org/10.1109/TIE.2011.2174538
  3. A Novel Soft-Switching Battery Charge/Discharge Converter with Zero Voltage Discharge Function 2016, https://doi.org/10.1109/TPEL.2015.2482758
  4. Series-Input Series-Rectifier Interleaved Forward Converter With a Common Transformer Reset Circuit for High-Input-Voltage Applications vol.26, pp.11, 2011, https://doi.org/10.1109/TPEL.2011.2148126
  5. Sliding Mode Control for Current Distribution Control in Paralleled Positive Output Elementary Super Lift Luo Converters vol.11, pp.5, 2011, https://doi.org/10.6113/JPE.2011.11.5.639
  6. Current sharing in parallel connected boost converters 2016, https://doi.org/10.1049/joe.2016.0238