• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.185-194
• /
• 2019

The probabilistic tsunami risk assessment of large coastal areas is challenging because the inland propagation of a tsunami wave requires an accurate numerical model that takes into account the interaction between the ground, the infrastructures, and the wave itself. Classic mesh-based methods face many challenges in the propagation of a tsunami wave inland due to their ever-moving boundary conditions. In alternative, mesh-less based methods can be used, but they require too much computational power in the far-field. This study proposes a hybrid approach. A mesh-based method propagates the tsunami wave from the far-field to the near-field, where the influence of the sea floor is negligible, and a mesh-less based method, smooth particle hydrodynamic, propagates the wave onto the coast and inland, and takes into account the wave structure interaction. Nowadays, this can be done because the advent of general purpose GPUs made mesh-less methods computationally affordable. The method is used to simulate the inland propagation of the 2004 Indian Ocean tsunami off the coast of Indonesia.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1234-1245
• /
• 2018

The risk of multi-unit nuclear power plants (NPPs) at a site has received considerable critical attention recently. However, current probabilistic safety assessment (PSA) procedures and computer code do not support multi-unit PSA because the traditional PSA structure is mostly used for the quantification of single-unit NPP risk. In this study, the main purpose is to develop a multi-unit Level 2 PSA method and apply it to full-power operating six-unit OPR1000. Multi-unit Level 2 PSA method consists of three steps: (1) development of single-unit Level 2 PSA; (2) extracting the mapping data from plant damage state to source term category; and (3) combining multi-unit Level 1 PSA results and mapping fractions. By applying developed multi-unit Level 2 PSA method into six-unit OPR1000, site containment failure probabilities in case of loss of ultimate heat sink, loss of off-site power, tsunami, and seismic event were quantified.

• 한국해안해양공학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2002

과거, 울진원전 부지의 지진해일에 대한 안전성 평가는 가상최대 지진규모와 그에 상응하는 단층 파라미터를 이용하여 수행되었으나. 최근 지진공백역 이론에 근거하여, 과거 평가 규모 이상의 지진발생 가능성이 지진학자들에 의하여 제기되고 있다. 본 연구에서는 선형·비선형천수방정식 기반의 유한차분법을 이용하여 지진해일 안전성을 재평가하였다. 먼저, '83년 지진해일을 모의하고 이를 동해안 임원항의 최고 범람 수위와 비교하였다. 다음으로 '83년, '93년 지진해일과 위험 단층으로 분류되고 있는 5개 지진공백역 단층에 대하여 울진원전부지 도수로에서의 수위 상승과 저하를 계산하여, 울진원전이 평가대상 단층으로 의한 지진해일 발생시에도 필요 냉각수의 취수가 가능함을 보였다.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.1079-1089
• /
• 2017

Nuclear power plants under expansion and under construction in China are mostly located in coastal areas, which means they are at risk of suffering strong earthquakes and subsequent tsunamis. This paper presents a safety analysis for a new reinforced concrete containment vessel in such events. A finite element method-based model was built, verified, and first used to understand the seismic performance of the containment vessel under earthquakes with increased intensities. Then, the model was used to assess the safety performance of the containment vessel subject to an earthquake with peak ground acceleration (PGA) of 0.56g and subsequent tsunamis with increased inundation depths, similar to the 2011 Great East earthquake and tsunami in Japan. Results indicated that the containment vessel reached Limit State I (concrete cracking) and Limit State II (concrete crushing) when the PGAs were in a range of 0.8-1.1g and 1.2-1.7g, respectively. The containment vessel reached Limit State I with a tsunami inundation depth of 10 m after suffering an earthquake with a PGA of 0.56g. A site-specific hazard assessment was conducted to consider the likelihood of tsunami sources.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3244-3251
• /
• 2012

대형 해양구조물의 건설과 운영에서 중요한 항목 중의 하나가 재해위험도를 분석하고 평가하는 것이다. 이에 본 연구에서는 수중터널의 건설과 운영 시에 발생할 수 있는 재해 위험요소를 도출하고 퍼지 AHP(Analytic Hierarchy Process) 방법으로 이러한 위험요소의 수준을 파악하고자 하였다. 재해 위험도로는 자연재해 위험도와 인적재해 위험도로 구분하고 이러한 위험도 항목들이 수중터널에 미치는 영향을 전문가 설문을 통하여 조사하였다. 조사된 전문가 설문결과 데이터를 퍼지 AHP 기법으로 분석하여 재해위험도를 각 위험요소별로 정량화하였다. 또한, 수중 터널과 교량, 해저터널, 침매터널의 재해위험도 수준을 분석하여 수중터널이 가지고 있는 고유의 재해위험도 수준을 평가하였다. 재해위험도에서는 쯔나미와 지진이 가장 위험도 인식수준이 높았고, 인적재해 위험도는 화재와 폭발의 위험도 인식이 높은 수준이었다. 또한, 수중터널은 침매터널에 비해서는 1.4배, 교량에 비해서는 3.2배 위험도 인식수준이 높은 것으로 조사되었다.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.644-654
• /
• 2024

After the Tohoku earthquake and tsunami (Japan, 2011), regulatory efforts to mitigate external hazards have increased both the safety requirements and the total capital cost of nuclear power plants (NPPs). In these circumstances, identifying not only disaster robustness but also cost-effective capacity setting of NPPs has become one of the most important tasks for the nuclear power industry. A few studies have been performed to relocate the seismic capacity of NPPs, yet the effects of multiple hazards have not been accounted for in NPP capacity optimization. The major challenges in extending this problem to the multihazard dimension are (1) the high computational costs for both multihazard risk quantification and system-level optimization and (2) the lack of capital cost databases of NPPs. To resolve these issues, this paper proposes an effective method that identifies the optimal multihazard capacity of NPPs using a multi-objective genetic algorithm and the two-stage direct quantification of fault trees using Monte Carlo simulation method, called the two-stage DQFM. Also, a capacity-based indirect capital cost measure is proposed. Such a proposed method enables NPP to achieve safety and cost-effectiveness against multi-hazard simultaneously within the computationally efficient platform. The proposed multihazard capacity optimization framework is demonstrated and tested with an earthquake-tsunami example.

• Ocean Systems Engineering
• /
• 제9권3호
• /
• pp.261-285
• /
• 2019

Nowadays in offshore industry there are emerging hazards with vague property such as act of terrorism, act of war, unforeseen natural disasters such as tsunami, etc. Therefore industry professionals such as offshore energy insurers, safety engineers and risk managers in order to determine the failure rates and frequencies for the potential hazards where there is no data available, they need to use an appropriate method to overcome this difficulty. Furthermore in conventional risk based analysis models such as when using a fault tree analysis, hazards with vague properties are normally waived and ignored. In other word in previous situations only a traditional probability based fault tree analysis could be implemented. To overcome this shortcoming fuzzy set theory is applied to fault tree analysis to combine the known and unknown data in which the pre-combined result will be determined under a fuzzy environment. This has been fulfilled by integration of a generic bow-tie based risk analysis model into the risk assessment phase of the Risk Management (RM) cycles as a backbone of the phase. For this reason Fault Tree Analysis (FTA) and Event Tree Analysis (ETA) are used to analyse one of the significant risk factors associated in offshore terminals. This process will eventually help the insurers and risk managers in marine and offshore industries to investigate the potential hazards more in detail if there is vagueness. For this purpose a case study of offshore terminal while coinciding with the nature of the Caspian Sea was decided to be examined.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.967-973
• /
• 2021

In 2011, an earthquake and subsequent tsunami hit the Fukushima Daiichi Nuclear Power Plant, causing simultaneous accidents in several reactors. This accident shows us that if there are several reactors on site, the seismic risk to multiple units is important to consider, in addition to that to single units in isolation. When a seismic event occurs, a seismic-failure correlation exists between the nuclear power plant's structures, systems, and components (SSCs) due to their seismic-response and seismic-capacity correlations. Therefore, it is necessary to evaluate the multi-unit seismic risk by considering the SSCs' seismic-failure-correlation effect. In this study, a methodology is proposed to obtain the seismic-response-correlation coefficient between SSCs to calculate the risk to multi-unit facilities. This coefficient is calculated from a probabilistic multi-unit seismic-response analysis. The seismic-response and seismic-failure-correlation coefficients of the emergency diesel generators installed within the units are successfully derived via the proposed method. In addition, the distribution of the seismic-response-correlation coefficient was observed as a function of the distance between SSCs of various dynamic characteristics. It is demonstrated that the proposed methodology can reasonably derive the seismic-response-correlation coefficient between SSCs, which is the input data for multi-unit seismic probabilistic safety assessment.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.56-61
• /
• 2016

After Japanese Fukushima nuclear power plant accident caused by the beyond design basis earthquake and tsunami, it has turned to be a major challenge for nuclear safety. IAEA, US NRC and EU have provided new safety design standards for beyond design basis event, Domestic regulatory bodies have also enacted guidances for licensees and applicants on additional methods related to beyond design basis events. This paper describes several evaluation methods for applying to nuclear power plants piping for beyond design basis earthquake. As a results, energy method based on the absorbed energy on nuclear power plant, deterministic method following design code and theory, experience method considering past earthquake data and information and probabilistic methods similar to probabilistic risk assessment were reviewed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.330-330
• /
• 2017

최근 우리나라 주변에 잦은 지진으로 인한 재해위험도 증가 우려가 커지고 있다. 국내 외에서 지진해일 위험도 평가는 시나리오를 기준으로 수치해석을 수행하고 이들 결과를 활용하는 절차로 수행된다. 그러나 위험도 평가는 하중조건 즉, 지진해일을 발생시키는 지진의 발생빈도 및 크기를 종합적으로 고려한 확률 계산이 우선적으로 요구되나, 기존 분석 절차에서는 고려가 되지 않거나 상대적으로 간략화 되어 진행되고 있다. 이러한 점에서 본 연구에서는 과거 우리나라 주변에 지진 및 지진해일 자료, 수치해석 모형 결과를 활용하여, 지진의 규모와 발생빈도를 종합적으로 고려할 수 있는 지진해일 위험도 평가 방법을 수립하고자 한다. 본 연구에서는 첫째, 지진 위험도 평가를 위해서 Poisson-Pareto 분포를 이용하였다. 둘째, 지진발생 위치 및 크기를 고려한 지진해일 위험도 평가 모형을 개발하였다. 셋째, 지진발생 위험도 및 지진해일 위험도를 통합한 해석 모형을 개발하고자 하며, 본 연구애서 제시하는 모든 해석 절차는 매개변수의 불확실성을 고려할 수 있도록 Bayesian 해석기법을 도입하여 진행하였다.