• Research in Plant Disease
• /
• v.24 no.3
• /
• pp.237-241
• /
• 2018

A circular bark with a 30 cm width was artificially removed from the trunk of a 250-year-old zelkova tree (Zelkova serrata) heavily damaged by artificial girdling in Sunchang, Jeonbuk Province in March of 2005. The debarked area was cleaned approximately 10 days after artificial girdling and bark margins with 2 cm width above and below the girdled portion were cut off to promote wound callus formation. Nine pieces of fresh bark (width 8 cm, length 35 cm, thickness 0.5 cm) were then prepared from branches of neighbor zelkova trees broken by heavy snowfalls and pasted onto the girdled portion of the tree, after which a Vaseline dressing was applied to water-proof the area and rubber bars were used to hold the implants to the trunk. Two pieces of the implanted fresh barks were successfully grafted onto the girdled area and the damaged tree has been vigorously growing over 13 years. To our knowledge, this is the first case of successful bark implantation to cure a 250-year-old zelkova tree heavily damaged by artificial girdling. This bark implantation technique will be utilized for the conversation and management of heavily damaged big and old trees in the future.

• Journal of Korea Multimedia Society
• /
• v.23 no.9
• /
• pp.1155-1163
• /
• 2020

Deep learning approach is emerging as a new way to improve the accuracy of tree species identification using bark image. However, the approach has not been studied enough because it is confronted with the problem of acquiring a large volume of bark image dataset. This study solved this problem by utilizing a pretrained off-the-shelf DCNN model. It compares the discrimination power of bark features extracted by each DCNN model. Then it extracts the features by using a selected DCNN model and feeds them to a multi-layer perceptron (MLP). We found out that the ResNet50 model is effective in extracting bark features and the MLP could be trained well with the features reduced by the principal component analysis. The proposed approach gives accuracy of 99.1% and 98.4% for BarkTex and Trunk12 datasets respectively.

• Korean Journal of Plant Resources
• /
• v.18 no.2
• /
• pp.337-342
• /
• 2005

This study was conducted to investigate the bark production from a top branch(Woojuk) of lacquer tree(Rhus verniciflua) that collected Rhus lacquer in summer, analyzing a relationship between several factors - diameter, tree weight, weight of Woojuk and bark. The weight of Woojuk averaged was made up $48\%$ of the tree on average. As the weight of the tree increased, however, the Woojuk showed the rising trend. It was turned out that the tree size for making 1kg of dry bark must be at least DBB 8cm. The result on Woojuk's bark was that $43.3\%$ of total trees produced a green bark of 1.1kg to 1.5kg, and most of them put out 1.5kg and less. Also the rate of trees to make 0.6kg to 1.0kg of dry bark was highest in $50.8\%$, but its production in most trees was 1.0kg and below. As the moisture content of a green bark averaged $39\%$, it is estimated that the production of 1kg in dry bark requires at least 6kg of top branch in lacquer tree.

• Journal of Environmental Health Sciences
• /
• v.39 no.2
• /
• pp.151-158
• /
• 2013

Objective: This study was carried out to determine the depositional characteristics of pine needles, pine tree bark, moss, and soil, which are used as a passive air sampler (PAS) of atmospheric polychlorinated biphenyls (PCBs). Methods: All four media were sampled from the same site. PCB concentrations were analyzed by GC/MSD, and the lipid contents were measured using the gravimetric method. Results: The total PCB concentration (IUPAC No. 28, 52, 101, 138, 153, 180) was the highest in soil (227.97 pg/g dry), followed by pine needles (71.36 pg/g dry), pine tree bark (44.58 pg/g dry), then moss (21.91 pg/g dry). Pine needles contained the highest lipid contents (21.31 mg/g dry), whereas soil (10.01 mg/g dry), pine tree bark (4.85 mg/g dry), and moss (1.92 mg/g dry) contained less. The concentration of lower-chlorinated PCBs was relatively high in pine needles, pine tree bark and moss, but not in soil. The PCB concentrations were proportional to their lipid contents in pine needles, pine tree bark and moss, but a different trend was revealed in soil. Conclusions: The PCBs concentrations in the media were affected by various factors including atmospheric PCB concentrations, lipid contents, and depositional pathways. However, each of these factors had a varying influence depending on the type of medium.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.3
• /
• pp.313-323
• /
• 2015

One of the main processes of tenderizing beef in Joseon Dynasty was chemical methods involving Apricot seeds, manchu cherry twig and leaves, bamboo skins, mulberry tree bark, mangsa (硭砂), salmiacum (磠砂), alcohol, fermented malt, and original honey. This study analyzed and compared the effect of broussonetia papyrifera, fermented malt, cherry trees, and mulberry tree bark from old cookbooks. Tenderizing beef with cherry trees was most effective in the experiment on shearing force, TPA, and electrophoresis of beef. According to sensory evaluation and electrophoresis test results, tenderized beef with mulberry tree bark was slightly more preferred over the method using cherry trees. However, in accordance with the above mentioned experiment, quantitative descriptive analysis showed that the most common tenderizing material was derived from morus alba powder.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.126-134
• /
• 2007

This study reviewed the application of an extract from Kalopanax pictus stem bark and root bark as natural antioxidants. To investigate the effect on cell toxic level against transformed mouse fibroblast L929 in formula added with various extracts from Kalopanax pictus stem bark and root bark, this experiment was carried out by in vitro cytotoxicity method. Using DCFA-DA method, oxidative stress in cell was measured with other antioxidant activity methods including DPPH assay and NBT assay. Active oxygen inhibition rate for root bark insoluble hot water extracts showed the highest with 57.9% for 15 min treatment. In DPPH and NBT test, antioxidant activities of methanol extract from stem bark and insoluble hot water extract from stem bark were 96% (at 0.1%) and 95% (at 0.5%), respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.890-896
• /
• 2016

Paulownia tomentosa is one of fast-growing wood species in Korea. In order to evaluate the solid bioenergy properties of Paulownia tree, this study examined the heating value, moisture content (MC), pH and proximate analysis of stem, branch, root, bark and leaf. The heating values of wood parts were slightly higher than those of bark and leaf, and that of branch was the highest among all the samples. The higher moisture content of bark and leaf referred to their lower heating value. Also, the pH of stem, branch and root was similar and lower than those of bark and leaf. The ash content of bark and leaf was much higher than that of wood parts, which is the one of the reasons for effect on the lower heating value and higher pH. While, the volatile matter content (VMC) of bark and leaf was lower than those of wood parts. The bark showed the highest fixed carbon content (FCC), while the FCC of stem was the lowest among all the samples. The obtained results are encouraging that the Paulownia tree could be totally utilized as alternative fuels for bioenergy production.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.152-163
• /
• 2016

Present study investigates the potential of cassava peel and rubber tree bark for the removal of Cr (VI) from aqueous solution. Removal efficiency of more than 99% was obtained during the kinetic adsorption experiments with dosage of 3.5 g/L for cassava peel and 8 g/L for rubber tree bark. By comparing popular isotherm models and kinetic models for evaluating the kinetics of mass transfer, it was observed that Redlich-Peterson model and Langmuir model fitted well ($R^2$ > 0.99) resulting in maximum adsorption capacity as 79.37 mg/g and 43.86 mg/g for cassava peel and rubber tree bark respectively. Validation of pseudo-second order model and Elovich model indicated the possibility of chemisorption being the rate limiting step. The multi-linearity in the diffusion model was further addressed using multi-sites models (two-site series interface (TSSI) and two-site parallel interface (TSPI) models). Considering the influence of interface properties on the kinetic nature of sorption, TSSI model resulted in low mass transfer rate (5% for cassava peel and 10% for rubber tree bark) compared to TSPI model. The study highlights the employability of two-site sorption model for simultaneous representation of different stages of kinetic sorption for finding the rate-limiting process, compared to the separate equilibrium and kinetic modeling attempts.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.3
• /
• pp.17-21
• /
• 1988

In order to investigate the extending effects on urea-formaldehyde resin- or phenol- formal- dehyde resin- glued keruing plywood, hot pressing temperatures were controlled to 110, 140, 170 and $200^{\circ}C$. As the extender, wheat flour, persimmon bark powder, chestnut bark powder, the equivalently- extended with the above three powders, and diatomite powder were respectively mixed with 5, 10, 15 and 20% ratios to the resin liquid, and also with these the no- extended was allowed. Based on the measured bonding strength, the conclusions were drawn: 1. In the urea- formaldehyde resin, extending effects on the bonding strength were in the order of wheat flour, the equivalently- extended with the wheat flour, persimmon- and chestnut bark powder, persimmon bark powder, chestnut bark powder. In the phenol- formaldehyde resin, the effects in the order of wheat flour, persimmon bark powder, diatomite powder, chestnut bark powder were resulted in. Specifically, superior bonding strength to the no-extended were given with the wheat flour and persimmon bark powder. 2. On the whole, the bonding strength decreased gradually, as the hot pressing temperature increased except for the diatomite powder extending.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.3
• /
• pp.430-435
• /
• 2012

The objectives of this study were to form comparisons of total polyphenol compounds, the antioxidant activities and the urushiol contents of lacquer tree(Rhus verniciflua) bark and the sensory properties of chicken soup was made with lacquer tree bark that was cultivated from different cultivation areas; Hamyang, Wonju and China. Total polyphenol contents of Hamyang, Wonju and China were estimated as $375.28{\pm}3.48$, $403.60{\pm}6.6$ and $311.06{\pm}4.99$ mg/g. The total flavonoids contents of Hamyang, Wonju and China were measured as $374{\pm}14.12$, $683.70{\pm}12.64$ and $334.64{\pm}18.40$ mg/g. The total phenolic compounds and flavonoids concentration, DPPH radical scavenging activity, and ABTS radical scavenging of lacquer tree cultivated in Wonju were higher than the others; Hamyang and China. The urushiol content of lacquer tree bark from Hamyang was $4.59{\pm}0.04$ ppm and higher than others. Urushiol was not detected in China lacquer tree bark. Sensory evaluation tests for chicken soup containing lacquer tree bark showed that the scores of Wonju lacquer tree bark chicken soup was highest, however there are no differences between Hamyang, Wonju, and China significantly(p<0.05).