• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1609-1618
• /
• 2015

DC microgrids are considered as prospective systems because of their easy connection of distributed energy resources (DERs) and electric vehicles (EVs), reduction of conversion loss between dc output sources and loads, lack of reactive power issues, etc. These features make them very suitable for future industrial and commercial buildings' power systems. In addition, the bipolar-type dc system structure is more popular, because it provides two voltage levels for different power converters and loads. To keep voltage balanced in such a dc system, a bidirectional dual buck-boost voltage balancer with direct coupling is introduced based on P-cell and N-cell concepts. This results in greatly enhanced system reliability thanks to no shoot-through problems and lower switching losses with the help of power MOSFETs. In order to increase system efficiency and reliability, a novel burst-mode control strategy is proposed for the dual buck-boost voltage balancer. The basic operating principle, the current relations, and a small-signal model of the voltage balancer are analyzed under the burst-mode control scheme in detail. Finally, simulation experiments are performed and a laboratory unit with a 5kW unbalanced ability is constructed to verify the viability of the bidirectional dual buck-boost voltage balancer under the proposed burst-mode control scheme in low-voltage bipolar-type dc microgrids.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.424-429
• /
• 2014

This paper investigates the problem of synchronization of the Pehlivan chaotic system based on sliding mode control and GA. For this, a brief overview of the Pehlivan chaotic system is given. Then, the conventional sliding mode control technique is described and a synchronization method using GA strategy is proposed. The proposed method is that the GA searched the parameters including sliding plane and control gains) selected by the designer in the sliding mode control are searched optimally through the GA. The GA in the MATLAB Toolbox was used and simulation work is shown to illustrate the effectiveness of the synchronization schemes for the chaotic system.

• Culinary science and hospitality research
• /
• v.17 no.5
• /
• pp.74-91
• /
• 2011

The purpose of this study is to investigate the efficiency of a government-supported project developed to improve the quality and hygiene levels of food, service, and restaurant facilities for foreign customers in Chungnam province. Data was collected from 53 restaurant owners and restaurant managers. This study empirically analyzes and presents a mode with key factors influencing transfer of training and training satisfaction. Multiple regression analysis methods were used to test the relationships among four factors for transfer of training, training satisfaction, and retraining intentions. There are three main findings. First, teaching methods and relevance factors had a significant effect on transfer, but instructor and education environment factors did not. Second, the teaching methods, instructor and education environment factors had a direct influence on training satisfaction, but the relevance factor didn't. Third, transfer and satisfaction both were influenced significantly by retraining. Based on the findings of this study, a trainer, designing training curriculum for a production environment, should emphasize the role of the trainer and focus on learning tools. Finally, a thorough learning design is needed for learner's satisfaction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1827-1840
• /
• 2001

In digital data transmission/storage systems, the compensation for channel distortion is conducted normally using a training sequence that is known a priori to both the sender and receiver. The use of the training sequences results in inefficient utilization of channel bandwidth. Sometimes, it is also impossible to send training sequences such as in the burst-mode communication. As such, a great deal of attention has been given to the approach requiring no training sequences, which has been called the blind equalization technique. On the other hand, to utilize the limited bandwidth effectively, the concept of partial response (PR) signaling has widely been adopted in both the high-speed transmission and high-density recording/playback systems such as digital microwave, digital subscriber loops, hard disk drives, digital VCRs and digital versatile recordable disks and so on. This paper is concerned with blind adaptive equalization of partial response channels whose transfer function zeros are located on the unit circle, thereby causing some problems in performance. Specifically we study how the problems of blind channel equalization associated with the PR channels can be improved. In doing so, we first discuss the existing methods and then propose new structures for blind PR channel equalization. Our structures have been extensively tested by computer simulation and found out to be encouraging in performance. The results seem very promising as well in terms of the implementation complexity compared to the previous approach reported in literature.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.553-559
• /
• 2015

The purpose of this research is to develop a gait assistive device to enhance the gait stability and training efficiency of stroke patients. The configuration of this device is mainly composed of a motored wheel and a single cane whose lower end is attached to a motored wheel frame. A patient can feel haptic information from continuous ground contact from the wheel while walking through the grip handle. In addition, the wheeled cane can avoid using excessive use of the patient's upper limb for weight support and motivate the patient to use a paralyzed lower limb more actively. Moreover, the proposed device can provide intuitive and safe user interaction by integrating a force sensor and a tilt sensor equipped to the cane frame, and a switch sensor at the cane's handle. The admittance control has been implemented for the patient to change the walking speed intuitively by using the interaction forces at the handle. A hemi-paretic stroke patient participated in the walking assistive experiments as a pilot study to verify the effectiveness of the proposed haptic cane system. The results showed that the patient could improve walking speed and muscle activations during walking with a constant speed mode of the haptic cane. Moreover, the patient could maintain the preferred walking speeds and gait stability regardless of the magnitude of resistance forces with the admittance control mode of the haptic cane. The proposed robotic gait assistive device with a simple and intuitive mechanism can provide efficient gait training modes to stroke patients with high possibilities of widespread utilizations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.76-82
• /
• 2017

Since the introduction of electronically controlled engines and electric propulsion ships, the need for an uninterruptible power supply for emergency power supply devices that use batteries has gained importance. The bidirectional converter in such emergency power supply devices is a crucial component. This paper proposes, a topology for an improved DC-DC bidirectional converter that is characterized by a high voltage conversion ratio and low voltage stress of switches. To confirm the performance of the converter, a computer simulation was executed with PSIM software. The conversion ratio of the proposed converter was found to be four times higher than the conventional boost converter in step-up mode and one-fourth that of the conventional buck converter in step-down mode, and the voltage stress of the switches was one-fourth of the high-side voltage. Moreover, the proposed converter was confirmed to be able to distribute equal currents between two interleaved modules without using any extra current-sharing control method because of the charge balance of its blocking capacitors.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.75-80
• /
• 2015

To train convergence experts ICT infrastructure must be learned IoT use capabilities of things. In this paper, targeted to students that are majoring in computer science, and for the design of the curriculum and the educational model that handles education of operation in general for training IoT-related education for five months to experts of convergence training describe the contents. Course is the basic ability of the process, core competence course, is divided into real-life capability process and on-site training course, was constructed in a total of 10 stages of the process details. Curriculum, it was designed to learn sensing technology, network technology, security, and content production technology. This educational model is utilized for job creation human resource training project of 2015 Ministry of Employment and Labor, it demonstrated the utility to contribute in order to achieve a high completion and the employment rate. Applicable to future university education plans to expand the curriculum, including courses that complement the Java.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.16-23
• /
• 2018

Chaos is one of the most significant topics in nonlinear science, and has been intensively studied since the Lorenz system was introduced. One characteristic of a chaotic system is that the signals produced by it do not synchronize with any other system. It therefore seems impossible for two chaotic systems to synchronize with each other, but if the two systems exchange information in just the right way, they can synchronize. This paper addresses the problem of synchronization in a modified Lorenz chaotic system based on active control, sliding mode control, and the Lyapunov stability theory. The considered synchronization scheme consists of identical drive and response generalized systems coupled with linear state error variables. For this, a brief overview of the modified Lorenz chaotic system is given. Then, control rules are derived for chaos synchronization via active control and slide mode control theory, with a strategy for solving the chattering problem. The asymptotic stability of the overall feedback system is established using the Lyapunov stability theory. A set of computer simulation works is presented graphically to confirm the validity of the proposed method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.125-138
• /
• 2006

The use of system identification approaches for damage detection has been expanded in recent years owing to the advancements in data acquisition system andinformation processing techniques. Soft computing techniques such as neural networks and genetic algorithm have been utilized increasingly for this end due to their excellent pattern recognition capability. In this study, damage detection of bridge structures using neural networks technique based on the modal properties is presented, which can effectively consider the modeling uncertainty in the analysis model from which the training patterns are to be generated. The differences or the ratios of the mode shape components between before and after damage are used as the input to the neural networks in this method, since they are found to be less sensitive to the modeling errors than the mode shapes themselves. Two numerical example analyses on a simple beam and a multi-girder bridge are presented to demonstrate the effectiveness and applicability of the proposed method.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1384-1390
• /
• 2012

It is well known that the exercising and stimulating of fingers have an important bearing on the brain. We take note of the fact and develope a game device for improving one's health and brain ability in respect of the education and training. Especially, we develope the device focused on the balanced exercising of five finger for improving brain function. The game device is possible to used in two-ways, namely online and off-line mode. In online mode, the device is connected with other visual devices such as smart phone and smart TV and communicated with Bluetooth and it is used as a MMI(multi-modal interface) device. Whereas, in off-line mode the game device works independently and it makes possible to enjoy auditorial and tactual games without video images for promotion of brain activity and emotional cultivation. For certification of the device, we implement two games(a fishing game for off-line mode and a shooting game for online mode) for people of all age, especially good for the elderly. It is usable as a game device to offering the elderly a great help for preventing impairment of the cognitive functions.