• 한국소음진동공학회논문집
• /
• 제13권9호
• /
• pp.730-734
• /
• 2003

For the noise reduction measures in a construction field or near the traffic line receiver is often the most economic measure in order to exclude the propagated sound. The dimension of the barrier is decided by the noise and construction design, and the constructive quality of a soundproof panel shall be secured in accordance with KS F4770 to guarantee the safety of sound barriers. In this paper the problems included in the KS F4770-1 that is the regulation for the metallic sound barrier of the absorption type are identified and it is suggested what to be corrected or improved. Through a series of the analyses, conclusions were reached that it is required to improve test methods in KS F4770-1 as well as to break down test loads for building more cost-effective sound barrier.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.848-851
• /
• 2014

In a small territory like South Korea, the only alternative to accommodate people in a big city is building apartment house. Exterior traffic noise is not inevitable as the apartment house is set up on wayside or main road is newly established near the area. As the request for quiet environment increases for a better quality of life recently, the exterior noise is considered to be resolved. This study shows the present condition of exterior noise of apartments and reviews a need for the improvement by comparing and analyzing the regulations of main country. Finally, considered the evaluating the interior noise in the apartment house.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.219-223
• /
• 2003

For the noise reduction measures in a construction field or near the traffic line receiver is often the most economic measure in order to exclude the propagated sound. The dimension of the barrier is decided by the noise and construction design, and the constructive quality of a soundproof panel shall be secured in accordance with KS F4770 to guarantee the safety of sound barriers. In this paper the problems included in the KS F4770-1 that is the regulation for the metallic sound barrier of the absorption type are identified and it is suggested what to be corrected or improved. Through a series of the analyses, conclusions were reached that it is required to improve test methods in KS F4770-1 as well as to break down test loads for building more cost-effective sound barrier.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.1-6
• /
• 2005

In domestic replacement tire market, imported tires are increasing condinuously. Because there is no institute officially investigating tire safety and performance, domestic drivers can be exposed to defective tires with no regulations. In this study we performed investigation of replacement tire market status and amount of imported tires. Over $90\%$ of imported tires are for passenger car and the number of total imported tires is increasing in recent years. Low price tires imported from Southeast Asia and China are selected to evaluate quality level. Basic inspection, indoor test, outdoor test, material test are conducted to evaluate the selected tires and compared with tires of domestic maker. From test results quality level of the selected tires could be found.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.108-120
• /
• 2001

In this paper, the braking performance considering the dynamic weight is analyzed about the tractor-semitrailer vehicle. The basic brake performance, the parking brake performance, the emergency brake performance and the locking point deceleration etc. are to be calculated for the brake system design of the tractor-semitrailer vehicle. This braking performance is related to traffic regulations and braking characteristics according to the vehicle deceleration, the tire-road friction coefficient and specifications of the air brake system. The design program for the braking performance based on various design variables of the vehicle and the air brake system is developed integrating the analysis functions. This design program is developed by an object oriented programming method that is windows based. GUI (Graphic User Interface) function and the convenience of operating are greatly considered.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.513-516
• /
• 2004

Consistency in design, manufacture, installation and performance test of expansion joints is insufficient for guarantee of reliability because they are imported from various foreign countries as America, Japan and Europe. In addition to that, the regulations or codes of expansion joint should be revised and established for levels of vibration and noise generated from riding vehicles especially. Regulation on the noise neighboring traffic roads is established by ministry of environment. Therefore, Field tests on the vibration and the noise at expansion Joints, especially rail-type and finger-type joints which are typical ones in bridge with short or middle span, are performed and performance of expansion joints are analyzed. And so, the results of the investigation will be utilized as basic data for the regulation on the vibration and the noise.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.342-345
• /
• 2019

자율주행자동차는 기술적 측면에서 많은 발전이 이루어져왔으나 자율주행자동차의 상용화가 가능하도록 다양한 법적 문제를 해결하는 작업은 매우 더디게 진행되고 있다. 본 논문에서는 자율주행자동차에서 대표적인 법적 이슈인 도로 주행 근거를 분석하고 현행 법/규정상의 문제점을 파악하며 이에 대한 개선 방안을 제시한다. 자율주행자동차에서 기술 개발과 법/규정 정비는 상호 협력적으로 이루어져야 하며, 이러한 법적 이슈를 이해하는 것은 자율주행자동차를 개발하는 기술자에게도 큰 도움이 될 것으로 여겨진다.

• 자동차안전학회지
• /
• 제13권3호
• /
• pp.95-101
• /
• 2021

The Korea's safety standards for vehicle have been strengthened to reduce casualties from traffic accidents since 1962. The standards have a rather complicated structure. The safety standards are composed of the main text and asterisks, and the safety standard implementation rules are composed of the main text, asterisks and appendices, and items of the same name are stipulated in other chapters within the safety standards. This study is to suggest improvement measures such as simplifying the structure of these safety standards and integrating safety standard items with the same name. Through this, users' understanding of the standards will be improved, and it is expected that the system will be more efficient such as securing safety quickly through harmonization with international standards following the development of rapidly changing new technologies such as automated vehicles.

• 토지주택연구
• /
• 제11권4호
• /
• pp.115-124
• /
• 2020

Incentive/Disincentive (I/D) contract is designed for minimizing any disruption of traffic flow in road construction projects. I/D contracting projects have been evaluated with regard to time and cost performance in various states, more than 35 states. However, construction project managers and planners have little understanding of the project factors that affect the project time and cost performance of highway construction projects using I/D regulations. Therefore, the purpose of this research is to find factors that affect I/D project success or failure to improve the decision-making process for the implementation of I/D projects. In order to achieve the objectives of this research, the researchers collected I/D road construction project data from FDOT and performed evaluation for each collected project. Then, project data analysis to identify key factors that affect I/D project performance was performed. In conclusion, five significant factors for project time performance and six significant factors for project cost perfornace were identified and summarized.

• 융복합기술연구소 논문집
• /
• 제11권1호
• /
• pp.25-28
• /
• 2021

Recently, the fire safety of road tunnels has been important issues in South Korea. However, proper fire safety regulations has not made for road tunnels. Due to geographical challenges in South Korea, road tunnels should be constructed to secure stable traffic flows. In the Guidelines for Installing and Managing Disaster Prevention Facilities of Road Tunnels (NFSC 603), main target vehicles are passenger cars. This guidelines cannot support big fires from larger vehicles such as cargo, oil trucks. In this study, fire safety for a road tunnel in port area was analyzed with fire dynamics theory under cargo truck fire scenario. Sujunsan road tunnel in Busan city was chosen as a target tunnel, which links between Busan port and highways to increase cargo shipping. The results show the limitations of present guidelines (NFSC 603) for road tunnel from large fire situations.