• 대한본초학회지
• /
• 제28권4호
• /
• pp.1-6
• /
• 2013

Objectives : In other to determine the optimal extraction conditions, the various Bojungikgi-tang (BJIGT) decoctions prepared by different pressure levels and different extraction times were compared and evaluated in terms of the extract yield and the total soluble solid content. Methods : Decoctions were prepared by the pressure levels of 0 (non-pressurized) and 1 $kgf/cm^2$ (pressurized) for 60, 120 and 180 min. The extract yield and the total soluble solids content of decoctions were measured, and the amounts of the reference compounds in decoctions were investigated by the analysis using high performance liquid chromatography. Results : The extract yield and the total soluble solid content were higher in decoctions extracted by the pressurized method than those from decoction with non-pressurized method. The patterns of yield and contents showed a proportional increase to the extraction time. In analysis of the linear regression for four reference compounds such as liquiritin, nodakenin, hesperidin, and glycyrrhizin, the good linearity with the correlation coefficient more than 0.9999 was observed. The highest contents for four reference compounds were observed at 180 min of both the pressurized method and the non-pressurized method. Conclusions : This study suggests that the pressure in extraction method and the extraction time affect the compositional constituents in BJIGT decoctions. The extraction time of 180 min could be chosen in both pressurized and non-pressurized method as optimal extraction condition.

• 한국산업보건학회지
• /
• 제26권3호
• /
• pp.307-316
• /
• 2016

Objectives: In general, NIOSH method 5506 is most widely used for the occupational exposure measurement of PAHs, but 2-4 ring PAHs have poor desorption efficiency, especially for a filter. The purpose of this study was to determine a method to increase the desorption efficiency of 16-PAHs using an ultrasonic extraction procedure. Methods: Test samples prepared spiked XAD-2 tubes and PTFE filters in the range of $0.01-1.0{\mu}g/mL$ for desorption efficiency study. Four different extraction solvents, acetonitrile, acetone, tetrahydrofuran and dichloromethane, were tested in order to select the most suitable solvent for the extraction of the 16 PAHs. The addition of dimethyl sulfoxide and sonication time were considered in order to determine the method with the highest extraction efficiency. All samples were made in three sets and analysis was replicated seven times by HPLC. Results: Acetonitrile and acetone were the optimized as an extraction solvent and desorption efficiency of 2-ring PAHs such as naphthalene, acenaphthylene were increased 3~19% with dimethyl sulfoxide for XAD-2. Acetone was the best extraction solvent for PTFE filter and the desorption efficiency was increased 3~13% for 2- to 4-ring PAHs. The optimum sonication time was 60 minutes and desorption efficiency increased with extraction time. Conclusions: As a result, the best extraction solvent was acetone with dimethyl sulfoxide for ultrasonic extraction procedure and the desorption efficiency of this method was better than NIOSH 5506's. This study could be applied as a method for occupational exposure measurement of PAHs.

• Integrative Medicine Research
• /
• 제6권4호
• /
• pp.388-394
• /
• 2017

Background: The present study optimized ultrasound-assisted extraction conditions to maximize extraction yields of glycyrrhizic acid from licorice. Methods: The optimal extraction temperature ($X_1$), extraction time ($X_2$), and methanol concentration ($X_3$) were identified using response surface methodology (RSM). A central composite design (CCD) was used for experimental design and analysis of the results to obtain the optimal processing parameters. Results: Statistical analyses revealed that three variables and the quadratic of $X_1$, $X_2$, and $X_3$ had significant effects on the yields and were followed by significant interaction effects between the variables of $X_2$ and $X_3$ (p<0.01). A 3D response surface plot and contour plots derived from the mathematical models were applied to determine the optimal conditions. The optimum ultrasound-assisted extraction conditions were as follows: extraction temperature, $69^{\circ}C$; extraction time, 34?min; and methanol concentration, 57%. Under these conditions, the experimental yield of glycyrrhizic acid was 3.414%, which agreed closely with the predicted value (3.406%). Conclusion: The experimental values agreed with those predicted by RSM models, thus indicating the suitability of the model employed and the success of RSM in optimizing the extraction conditions.

• Journal of Ginseng Research
• /
• 제33권4호
• /
• pp.337-342
• /
• 2009

The extraction conditions for the production of red ginseng polysaccharide were proposed. The crude fiber content of red ginseng marc (RGM) (15.3%) was much higher than that of white ginseng (WG) (2.1%) and red ginseng (RG) (0.5%). Thus, RGM was selected as the raw material for polysaccharide production. The correlation between the particle size of RGM and the polysaccharide extraction was investigated with a correlation analysis using the SPSS package. The two parameters were found to have a significant correlation (p<0.01). The polysaccharide extraction increased as the particle size of RGM decreased. The optimal concentration of RGM was 6.66% (w/v). The extraction yield increased as both the extraction temperature and the extraction time increased. Finally, the extraction temperature and time were selected as $85^{\circ}C$ and 5 hrs, respectively. Consequently, the extraction conditions for polysaccharide production were optimized and statistically confirmed.

• Natural Product Sciences
• /
• 제21권2호
• /
• pp.141-145
• /
• 2015

Hesperidin, which is the most abundant flavonoid of Citrus unshiu (Rutaceae), has been reported to possess diverse activities and widely used as functional foods and cosmetics. For the development of functional products, extraction procedure is indispensable. Extraction conditions affect the composition of extract as well as its biological activity. Therefore, we tried to optimize extraction conditions such as extraction solvent, extraction time and extraction temperature for maximum yield of hesperidin using response surface methodology with threelevel-three-factor Box-Behnken design (BBD). Regression analysis showed a good fit of the experimental data and the optimal condition was obtained as ethanol concentration, 59.0%; temperature $71.5^{\circ}C$ and extraction time, 12.4 h. The hesperidin yield under the optimal condition was found to be $287.8{\mu}g$ per 5 mg extract, which was well matched with the predicted value of 290.5 μg. These results provides optimized extraction condition for hesperidin and might be useful for the development of hesperidin as functional products like health supplements, cosmetics and medicinal products.

• 공업화학
• /
• 제29권4호
• /
• pp.446-451
• /
• 2018

플라보노이드성분 함량이 높은 밀싹을 이용하여 유효성분을 추출하고, 중심합성계획모델을 이용하여 추출공정을 최적화하였다. 중심합성계획모델의 반응치로는 추출수율과 플라보노이드성분 함량을 설정하고, 독립변수인 추출시간, 주정/초순수 부피비, 추출온도에 따른 주효과도와 교호효과도를 해석하였다. 추출수율의 경우 추출시간과 추출온도가 상대적으로 큰 영향을 미쳤으며, 플라보노이드성분 함량의 경우에는 추출시간의 영향이 가장 크게 나타났다. 추출수율과 플라보노이드성분 함량을 모두 고려한 결과 최적추출조건은 추출시간(2.44 h), 주정/초순수의 부피비(50.00 vol%), 추출온도($54.41^{\circ}C$)이었으며, 이때 추출수율은 30.14 wt%, 플라보노이드성분 함량은 $35.37{\mu}g\;QE/mL\;dw$이었다. 이 조건의 실제 실험결과 추출수율(29.92 wt%), 플라보노이드성분 함량($35.32{\mu}g\;QE/mL\;dw$)으로 오차율은 각각 0.39%, 0.74%이었다. 이는 두 개의 반응치를 동시에 분석하는 다중분석 종합분석임에도 높은 정확도를 나타낸 것으로 본 연구에서의 최적화과정 신뢰도가 우수한 것으로 사료된다.

• Bulletin of the Korean Chemical Society
• /
• 제20권6호
• /
• pp.689-695
• /
• 1999

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.

• 한국약용작물학회지
• /
• 제19권4호
• /
• pp.271-275
• /
• 2011

In this study, ginseng flower water extracts were analyzed to set up the ginsenoside content and quality optimization condition. The highest total ginsenoside content among the ginseng flower water extracts was 67.44mg/g which was extracted at $85^{\circ}C$ for 3 hours. In addition, the ginsenoside content decreased according to the increased extraction temperature and time. The highest total content of $Rb_2$ and Re was 37.42mg/g at $75^{\circ}C$ for 6 hours. Total content of $Rb_2$ and Re decreased according to the increased extraction temperature and time. The highest prosapogenin ($Rg_2$ + $Rg_3$ + $Rh_1$) content among the total of ginseng flower water extracts was 18.58mg/g which was extracted at $95^{\circ}C$ for 12 hours. The sweetness, absorbance were increased according to the increased extraction temperature and time. But pH was decreased according to the increased extraction time.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.719-726
• /
• 2010

In this paper, the appropriate thermal storage time of an air-conditioning system with slab thermal storage was considered by use of summer measurement values. Two standards of heat extraction rate and criterion function were established as the standard that evaluates appropriateness. When heat extraction rate was a standard, zero hour and seven hours were obtained as appropriate thermal storage time, in the case of evaluation by energy consumption and running cost individually. Also, when criterion function was a standard, the difference between energy consumption and running cost was small, it was because the weight function to room air temperature deviation was much bigger than heat extraction rate.

• 한국식품영양학회지
• /
• 제30권2호
• /
• pp.319-325
• /
• 2017

본 연구에서는 상업적으로 가장 많이 쓰는 커피 추출기인 2단계 퍼콜레이터를 사용하여 인스턴트커피를 제조하기 위한 커피추출조건을 최적화하였다. 반응표면분석을 위한 수학적 모델식을 구하기 위해 중심합성계획법이 사용되었고, 구해진 모델식에서는 커피추출액의 추출 수율과 추출액의 전반적인 기호도가 3가지 요인(추출기의 급수온도, 추출배수, 추출시간)의 2차식으로 표현되었다. 반응표면분석의 결과를 바탕으로 40% 이상의 수율을 보이는 범위에서, 추출수율과 전반적인 기호도를 최대로 하는 최적 커피 추출 조건은 급수온도 $163^{\circ}C$, 추출배수 4.3 및 추출시간 27분이었다. 이 결과는 산업에서 경쟁력 있는 인스턴트 커피 제조를 위한 커피 추출 조건에 대한 기초 자료를 제공한다.