• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.91-98
• /
• 2017

In this study, the effect of window installation position in the residential building with the external insulation was numerically investigated in terms of insulation performance and heating/cooling energy consumption. For different window positions, 2-D heat transfer simulation was conducted to deduce the linear thermal transmittance, which was inputted to the dynamic energy simulation in order to analyze heating/cooling energy consumption. Simulation results showed that the linear thermal transmittance ranges from 0.05 W/mK to 0.7 W/mK, and is reduced as the window is installed near the external finish line. Indoor surface temperature and TDR analysis showed that the condensation risk is the lowest when the window is installed at the middle of the insulation and wall structure. It was also found that the window installation near the external finish can reduce the annual heating/cooling energy consumption by 12~16%, compared with the window installation near the interior finish. Although the window installation near the external finish can achieve the lowest heating/cooling energy consumption, it might lead to increased condensation risks unless additional insulation is applied. Thus, it can be concluded that the window should be installed near the insulation-wall structure junction, in consideration of the overall performance including energy consumption, condensation prevention and constructability.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.232-237
• /
• 2009

본 연구는 일반적으로 이용되는 EVA 필름과 비교하여 폴리올레핀(PO), 불소, 방적, 방무, 보온필름 등의 기능성필름이 토마토의 품질에 어떤 영향을 미치는 가를 구명하고자 하였다. 분광투과특성에 있어 자외선은 불소필름이 가장 많았고 PO필름이 가장 적었으며, PAR는 불소, 보온, PO필름 등이 많았으며, 근적외선도 EVA에 비해 기능성필름이 많은 경향이었다. 전체광선의 투과율은 불소, 방무, 방적, PO, 보온, EVA 순으로 높았다. 하우스 내 주간온도는 광투과율 차이에 의해 불소필름이 가장 높고 EVA가 가장 낮았으며, 야간온도는 필름이 두꺼운 방적 및 PO필름이 가장 높게 유지되었다. 기능성필름은 EVA에 비해 과실 당도가 $0.2{\sim}0.5^{\circ}Bx$ 더 높았고, 과실 내 라이코펜 함량이 $15{\sim}30%$ 높게 나타났다. 따라서 토마토의 당도, 라이코펜 함량 등의 품질향상을 위해서는 일반필름 대신에 기능성필름을 이용하는 것이 효과적일 것으로 판단되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.90-90
• /
• 2011

Transparent conducting oxide (TCO) films have been intensively utilized in the electric applications, such as, displays, lightings and solar cells due to the good electric conductivity with an excellent transmittance of the visible light. We, herein present an excellent Al-doped ZnO film (AZO), which has been fabricated by co-sputtering method. An as-deposited AZO film had an optical transmittance of 84.78% at 550 nm and a resistivity of $7.8{\times}10^{-3}{\Omega}cm$. A rapid annealing process significantly improved the optical transmittance and electrical resistivity of the AZO film to 99.67% and $1{\times}10^{-3}{\Omega}cm$, respectively. The fabricated AZO film was fabricated for a metal-semiconductor-metal (MSM) structure. The AZO film-embedding MSM device was highly responsive to a UV light.

• 열처리공학회지
• /
• 제30권4호
• /
• pp.151-155
• /
• 2017

The ZTO single layer and ZTO/Ag/ZTO tri-layer films were deposited on glass substrates by using the radio frequency (RF) and direct current (DC) magnetron sputtering and then rapid thermal annealed (RTA) in a low pressure condition for 10 minutes at 150 and $300^{\circ}C$, respectively. As deposited tri-layer films show the 81.7% of visible transmittance and $4.88{\times}10^{-5}{\Omega}cm$ of electrical resistivity, while the films annealed at $300^{\circ}C$ show the increased visible transmittance of 82.8%. The electrical resistivity also decreased as low as $3.64{\times}10^{-5}{\Omega}cm$. From the observed results, it is concluded that rapid thermal annealing (RTA) is an attractive post-deposition process to optimize the opto-elecrtical properties of ZTO/Ag/ZTO tri-layer films for the various display applications.

• 한국전기전자재료학회논문지
• /
• 제23권4호
• /
• pp.280-286
• /
• 2010

We have investigated the influence of rapid thermal annealing (RTA) temperature on properties of Al-doped zinc oxide (AZO) thin films deposited on glass substrate by using radio-frequency magnetron sputtering. The RTA is performed in a nitrogen ambient in the temperature range from 300 to $600^{\circ}C$ for 1 minute in a rapid thermal annealer after growing the AZO thin films. The crystallographic structure and the surface morphology of AZO thin film are measured by using X-ray diffraction, and atomic force microscopy and scanning electron microscopy, respectively. The optical transmittance of the deposited thin films is examined in the wavelength range of 300-1100 nm, where the average transmittance is above the 90% in the visible and near-infrared regions. The optical bandgap is calculated from the Tauc's model, and it shows a significant dependence on the RTA temperature. As for the electrical properties of the thin films, the AZO thin film annealed at $400^{\circ}C$ shows the lowest electrical resistivity of $8.6{\times}10^{-3}{\Omega}cm$ and the Hall mobility of $11.3cm^2$/V-sec. These results suggest that the RTA temperature is an important parameter to influence on the structural, electrical, and optical properties of AZO thin films.

• 폴리머
• /
• 제37권6호
• /
• pp.711-716
• /
• 2013

폴리(에틸렌 나프탈레이트)(PEN)의 사슬 배향과 이완이 PEN 유연기판의 치수안정성 및 광학 특성에 미치는 영향에 대하여 살펴보았다. 사슬이 배향된 PEN 기판은 사용온도 증가 시 PEN 분자 유동성을 감소시켜 $100^{\circ}C$ 이하에서 PEN의 열팽창계수(CTE)를 $20ppm/^{\circ}C$까지 감소시키나, 유리전이온도 근처에서 연신된 사슬의 이완에 의하여 열수축이 발생됨을 알 수 있었다. 유리전이온도 근처에서의 열처리는 이러한 열수축을 최소화시킬 수 있으나 사슬이완에 따른 PEN 분자의 경직성 또한 감소되어 열팽창계수가 연신 전 PEN의 고유 CTE의 65% 정도인 $70ppm/^{\circ}C$까지 다시 증가함을 확인하였다. 열처리 과정에서 연신된 필름에 응력을 가하지 않는 경우, 열수축 시작 온도 증가와 함께 열수축을 최소화할 수 있으며 연신에 의해 얻어진 낮은 CTE 또한 유지할 수 있었다. 배향에 의한 광 투과도 감소는 없는 반면 열처리는 미약한 결정화를 발현시켜 5% 정도의 광 투과도가 감소됨을 알 수 있었다.

• 태양에너지
• /
• 제2권2호
• /
• pp.37-53
• /
• 1982

In general, glass has proven to be an effective glazing material, exhibiting extended service lifetime and high solar transmittance while remaining opaque to long wave thermal reradiation. Plastics, which possess higher solar transmittance than commercial glass, are lightweight and also cost competitive with glass. In this paper a survey of various glazing materials is presented, and the comparative analysis of their properties are perform ed in detail with special emphasis on double glazing materials, which can be adaptable to various passive solar systems.

• KIEAE Journal
• /
• 제17권4호
• /
• pp.59-65
• /
• 2017

Purpose: Thermal performance and air tightness of window are improved for the building energy efficiency. As the deteriorated houses are increased, the improve measures with low cost and easy installation are developed in the energy performance of window. Attached glazing and windbreak can be easily applied to the window with low cost. In this paper, the effect of the attached glazing and windbreak on the thermal performance and air tightness of window is analyzed as the measure to improve performance of window. Method: Thermal transmittance of glazing is evaluated through WINDOW simulation according to thickness of attached glazing and air cavity. Based on the simulation results, thermal transmittance, air tightness and condensation resistance performance of four cases are tested according to Korea standards. One type of PVC sliding double window is chosen as the specimen. For the analysis on low performance of window, the outside of window is excluded in the PVC sliding double window. Result: This study shows that thermal performance of glazing can be increased by the application of attached glazing. Furthermore, lower thermal performance of glazing can obtain the higher effect of attached glazing. The application of attached glazing and windbreak can effect on increasing thermal performance and air tightness of window.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.924-928
• /
• 2005

We synthesized the two types of photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the two types of photopolymer surface can be obtained. The Voltage-transmittance (V-T) curve in the photoaligned TN cell with UV exposure was different from two type. The response time of photoaligned TN cell was measured about 21 ms in two alkyl chain and about 15 ms in four alkyl chain.

• 열처리공학회지
• /
• 제35권6호
• /
• pp.314-318
• /
• 2022

Transparent conducting ZnO/Ti/ZnO tri-layer films deposited on glass substrate with DC and RF magnetron sputtering were rapid thermal annealed at 150, 300 and 450℃ for 5 minutes and then effect of annealing temperature on the structural and optoelectronics properties of the films were investigated. The structural properties are strongly related to annealing temperature and the largest grain size is observed in the films annealed at 450℃. The electrical resistivity also decreases as low as 7.7 × 10^-4 Ωcm. The visible transmittance also depends on the annealing temperature. The films annealed at 450℃ show a higher transmittance of 80.6% in this study.