• Composites Research
• /
• 제32권5호
• /
• pp.249-257
• /
• 2019

In this paper, the buckling behavior of triaxially braided circular arch with monosymmetric open section subjected to three-point bending was studied experimentally and numerically. First, test specimens were manufactured using vacuum assisted resin transfer molding (VARTM). Then the specimen was tested under three-point bending to determine the ultimate buckling strength. Before performing the numerical analysis, effective material properties of the braided composite were obtained through micro-meso scale analysis virtual testing validated with available test results. Then linear buckling analysis and geometrically non-linear post buckling analysis, established to simulate the test setup, were performed to study the buckling behavior of the composite frame. Analysis results were compared with experimentally obtained ones for verification. The effect of manufacturing defects of tow misalignment, irregular surface and resin rich region, and uncertainties during test setup were studied using numerical models. From the numerical analyses performed it was observed that both manufacturing defect and uncertainties had effect on the buckling behavior and strength.

• 소성∙가공
• /
• 제23권1호
• /
• pp.16-22
• /
• 2014

The current study presents a simple setup method for making teeth models using a three-axis CNC milling machine. Physical teeth models can be made by several methods: casting, machining, and three-dimensional printing. Since the shape of a teeth model requires five-axis machining, the machining of a teeth model using a three-axis CNC milling machine requires careful setup operations. In this paper a simple datum shape is designed within the work piece of the teeth model. The datum shape is an n-sided prism with regular n-polygon ends and rectangular sides. In the present study a 12-sided prism is used, which easily makes 30 degree rotations for finish machining. The proposed setup approach does not require any special tools for making the teeth model using a three-axis CNC milling machine. A test was run and the results show that the proposed approach is useful for experimental makings with the limited facilities available.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1437-1443
• /
• 2011

선박 건조를 위한 기본 자재인 후판은 압연공정을 통해 생산된다. 본 논문에서는 후판압연 중에 발생하는 폭방향 휨을 일으키는 비대칭 요인들을 제어할 수 있는 설정모델을 제시한다. 일련의 삼차원 유한요소해석을 통해서 휨과 비대칭 요인 사이의 관계를 예측한다. 그 관계를 무차원 변수로 이루어진 선형 방정식으로 수식화 시킴으로써 설정모델을 도출한다. 소재 폭방향으로 두께 편차와 온도차이가 있는 경우에 대해서 파이롯트 압연 시험으로 통해서 설정모델의 정도를 검증한다. 본 모델에 의해 예측된 휨 곡률이 각각의 비대칭 요인들에 의해 측정된 휨 곡률과 상당히 일치하는 결과를 보여 주었다.

• Management Science and Financial Engineering
• /
• 제19권1호
• /
• pp.29-36
• /
• 2013

This paper considers common due-date assignment and scheduling on parallel machines. The main decisions are: (a) deter-mining the common due-date; (b) allocating jobs to machines; and (c) sequencing the jobs assigned to each machine. The objective is to minimize the sum of the penalties associated with common due-date assignment, earliness and tardiness. As an extension of the existing studies on the problem, we consider sequence-dependent setup times that depend on the type of job just completed and on the job to be processed. The sequence-dependent setups, commonly found in various manufacturing systems, make the problem much more complicated. To represent the problem more clearly, a mixed integer programming model is suggested, and due to the complexity of the problem, two heuristics, one with individual sequence-dependent setup times and the other with aggregated sequence-dependent setup times, are suggested after analyzing the characteristics of the problem. Computational experiments were done on a number of test instances and the results are reported.

• Journal of the Korean Data and Information Science Society
• /
• 제28권6호
• /
• pp.1547-1555
• /
• 2017

This paper studies Bayesian test of homogeneity in contingency tables made by discretizing a continuous variable. Sometimes when we are considering events of interest in small area setup, we can think of discretization approaches about the continuous variable. If we properly discretize the continuous variable, we can find invisible relationships between areas (groups) and a continuous variable of interest. The proper discretization of the continuous variable can support the alternative hypothesis of the homogeneity test in contingency tables even if the null hypothesis was not rejected through k-sample tests involving one-way ANOVA. In other words, the proportions of variables with a particular level can vary from group to group by the discretization. If we discretize the the continuous variable, it can be treated as an analysis of the contingency table. In this case, the chi-squared test is the most commonly employed method. However, further discretization gives rise to more cells in the table. As a result, the count in the cells becomes smaller and the accuracy of the test becomes lower. To prevent this, we can consider the Bayesian approach and apply it to the setup of the homogeneity test.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.125-131
• /
• 2021

For the vibration reliability tests, the jigs for mounting the test specimen on a vibration reliability tester are required. The dynamic stabilities of the jigs should be verified before the tests for obtaining the accurate reliability of the test specimen. This paper proposes an analytical technology for ensuring the dynamic structural stability for the test setup including the jig. The technology includes the mode analyses for checking resonance, the harmonic analyses for evaluating the dynamic structural stability of test setup including the jig, and the fatigue analyses for obtaining the durable reliability time with calculating the life cycles at the area of weakness. The cause investigation of the damaged jig during vibration reliability test of a rubber hose and the design of new revised jig are performed by using the technology. The vibration reliability test for the rubber hose with the new revised jig by analysis results is successfully conducted without any problem. Therefore the jig's design technology proposed in this paper may be useful for other items as well.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.171-182
• /
• 2022

Reusing the used pile has not yet been implemented due to the unpredictability of the bearing capacity evolution. This paper presents an analytic approach to estimate the sides shear setup after the dissipation of pore pressure. Long-term evolution of adjacent soil is simulated by viscoelastic-plastic constitutive model. Then, an innovative concept of quasi-overconsolidation is proposed to estimate the strength changes of surrounding soil. Total stress method (α method) is employed to evaluate the long term bearing capacity. Measured data of test piles in Louisiana and semi-logarithmic time function are cited to validate the effectiveness of the presented method. Comparisons illustrate that the presented approach gives a reasonably prediction of the side shear setup. Both the presented method and experiment show the shaft resistance increase by 30%-50%, and this highlight the potential benefit of piles reutilization.

• 전기전자학회논문지
• /
• 제18권1호
• /
• pp.64-76
• /
• 2014

이미지 센서 및 모듈의 영상 취득 특성을 테스트할 때에는 테스트 기기마다 화소값을 비교하는 방법, 결함을 수치화하는 방법, 불량을 판별하는 방법이 천차만별로 다르기 때문에 이미지 센서 및 모듈의 영상 취득 특성을 테스트하는 장비는 테스트 대상 기기의 종류에 따라 따로따로 셋업되어야 한다. 일반적으로 테스트 내용은 표준화된 형식이 아니라 임의 형식의 기술문서로 전달되기 때문에 테스트 대상 기기에 맞추어 수작업으로 테스트 프로그램을 개발하기 위해 매우 많은 시간과 노력이 필요하며 오류의 위험성도 높다. 본 논문에서는 하나의 프로그램으로 현재 사용되는 테스트를 거의 모두 수용할 수 있도록 다양한 영상 취득 테스트를 단일 프레임워크로 표현하는 표준화된 기술 방법을 제안한다.

• 대한산업공학회지
• /
• 제36권2호
• /
• pp.125-137
• /
• 2010

This study focuses on the problem of scheduling wafer lots of several product families in the deposition workstation in a semiconductor wafer fabrication facility. There are multiple identical parallel machines in the deposition workstation, and two types of setups, record-dependent setup and family setup, may be required at the deposition machines. A record-dependent setup is needed to find optimal operational conditions for a wafer lot on a machine, and a family setup is needed between processings of different families. We suggest two-phase heuristic algorithms in which a priority-rule-based scheduling algorithm is used to generate an initial schedule in the first phase and the schedule is improved in the second phase. Results of computational tests on randomly generated test problems show that the suggested algorithms outperform a scheduling method used in a real manufacturing system in terms of the sum of weighted flowtimes of the wafer lots.

• 한국경영과학회지
• /
• 제18권1호
• /
• pp.119-126
• /
• 1993

We study a manufacturing process that is quite common in semiconductor wafer fabrication of semiconductor chip production. A machine is used to process a job consisting of J wafers. Each job requires a setup, and the i$_{th}$ setup for a job is sucessful with probability P$_{i}$. The setup is prone to failure, which results in the loss of expensive wafers. Therefore, a tiral run is first conducted on a small batch. If the set up is successful, the test is passed and the balance of the job can be processed. If the setup is unsuccessful, the exposed wafers are lost to scrap and the mask is realigned. The process then repeats on the balance of the job. We call this as send-ahead policy and consider general policies in which the number of wafers that are sent shead depend on the cost of the raw wafer, the sequence of success probabilities, and the balance of the job. We model this process and determine the expected number of good wafers per job,the expected time to process a job, and the long run average throughput. An algorithm to minimize the cost per good wafer subject to a demand constraint is provided.d.d.