• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권2호
• /
• pp.215-219
• /
• 1999

This article discusses the diagnosis, anatomic consideration, and surgical management of masseter muscle hypertrophy. Surgical correction is advised for patients who have esthetic complaints. Esthetic improvement can be achieved by surgery and not by conservative treatment. Recently, the intraoral method, which leaves no scar on the face and minimizes the possibility of injury to the marginal branch of the facial nerve, has been supported by many surgeons. Patients who complained of marked swelling of unilateral or bilateral mandibular angle area and showed abnormal bony growth at the mandibular angle area and enlarged masseter muscle received mandibular angle shaving and excision of the inner layer of masseter muscle with intraoral approach. After operation, physiotherapy was done with EAST(eletrical acupuncture stimulation therapy) for encouraging the mouth opening and reducing the swelling. They showed early maximum mouth opening and reduction of swelling.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.273-282
• /
• 2003

Effect of fixation methods and relaxation treatment on the flame retardant(FR) and physical properties of MDPP/HMM treated cotton weft-knitted fabrics were studied. Combination of four different fixation methods - relaxation, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of cotton weft-knitted fabric with MDPP/HMM. As the results, 1. Swelling agent and wet fixation method helps FR agent penetrate the fiber efficiently. Interlock showed relatively higher values of LOI than single jersey. 2. Interlock showed relatively higher values of bending rigidity(B), shear rigidity(G) and coefficient of friction(MIU) than those of single jersey before and after flame resistant treatment. 3. An increase in internal volume of cotton fiber by relaxation treatment increased the bending rigidity(B), shear rigidity(G) and compressional energy(WC). 4. The cotton weft-knitted fabric treated wet fixation, which crossliked FR agent efficiently, showed higher bending rigidity, shear rigidity(G) and lower compressional energy(WC). Retention of swelling ability of cotton weft-knitted fabrics treated with MDPP/HMM, which increased the internal volume of cotton weft-knitted fabric, showed lower bending rigidity.

• 대한화장품학회지
• /
• 제21권2호
• /
• pp.49-56
• /
• 1995

키토산 마이크로캡슐 및 마이크로비드를 W/O emulsion법에 의해 제조하였으며, SEM을 통해 이들의 morphology를 관찰하였다. 마이크로캡슐은 SEM을 통해 관찰한 결과 약 8$mu extrm{m}$ 정도의 표피층을 가지고 있었으며, 평균 입자의 크기는 약 250$\mu\textrm{m}$ 이였다. 마이크로캡슐의 팽윤부피를 측정한 결과 양성자성 용매가 비양성자성 용매에 비해 상대적으로 높은 팽윤성을 보였다. 또한 메칠바이올렛을 함유시킨 후 그 방출거동을 pH 변화 및 라이소자임 첨가에 따라 관찰한 결과, pH 5.1에서 라이소자임 첨가시 방출속도가 높게 나타났다. 한편 W/O emulsion법에 의해 제조한 마이크로비드의 경우 70$\mu\textrm{m}$정도의 크기를 보였으며 다공성의 표면구조를 나타내었다. 용매 종류별 팽윤성을 측정한 결과 수용액에서 마이크로캡슐에 비해 2배 이상의 팽윤부피를 나타내었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.135-139
• /
• 2010

A construction technique to install the soil-bentonite (SB) cut-off wall for in-situ geoenvironmental containment by employing the trench cutting and re-mixing deep wall method is first presented in this paper. The laboratory test results on the hydraulic barrier performance of SB in relation to the chemical compatibility are then discussed. Hydraulic conductivity tests using flexible-wall permeameters as well as swell tests were conducted for SB specimens exposed to various types and concentrations of chemicals (calcium chloride, heavy fuel oil, ethanol, and/or seawater) in the permeant and/or in the pore water of original soil. For the SB specimens in which the pore water of original soil did not contain such chemicals and thus the sufficient bentonite hydration occurred, k values were not significantly increased even when permeated with the relatively aggressive chemical solutions such as 1.0 mol/L $CaCl_2$ or 50%-concentration ethanol solution. In contrast, the SB specimens containing $CaCl_2$ in the pore water had the higher k values. The excellent linear correlation between log k and swelling pressure implies that the swelling pressure can be a good indicator for the hydraulic barrier performance of the SB.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.518-522
• /
• 2012

Hyaluronic acid (HA) microbeads were synthesized by dropping 0.5 wt% of sodium hyaluronate dissolved in NaOH into 0.2 vol% of divinyl sulfone dissolved in 2-methyl-1propanol at a speed of 0.005 ml/min. HA microbeads were collected from a divinyl sulfone crosslinker solution stirred at 200 to 400 rpm for 5 h at temperatures from room temperature to $60^{\circ}C$ at intervals of $10^{\circ}C$. The crosslinked microbeads were then cleaned thoroughly using distilled water and ethanol. SEM results revealed that the microbeads were white-colored spheres. The 3-D porous network structure of the microbeads became dense with an increase in the crosslinking temperature; however, no dependence of the crosslinking temperature on the microbead size was detected. The extent of swelling decreased from 970% to 670% with an increase in the crosslinking temperature from room temperature to $60^{\circ}C$, most likely due to the increase in the degree of crosslinking.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1235-1239
• /
• 2018

We present a novel process to fabricate three-dimensional (3D) metallic patterns from 3D printed polymeric structures utilizing different hygroscopic swelling behavior of two different polymeric materials. 3D patterns are printed with two different polymers as cube shape. The surface of the 3D printed polymeric structures is plated with nickel by an electroless plating method. The nickel patterns on the surface of the 3D printed cube shape structure are formed by removing sacrificial layers using the difference in the rate of hygroscopic swelling between two printing polymer materials. The hygroscopic behavior on the interfaced structure was modeled with COMSOL Multiphysics. The surface and electrical properties of the fabricated three-dimensional patterns were analyzed and characterized.

• 폴리머
• /
• 제39권3호
• /
• pp.394-402
• /
• 2015

폴리아크릴로니트릴(PAN) 필름에 히드록실아민(HA)을 반응시켜 히드록시기와 아민기를 생성시키고, 히드라진으로 처리하여 가교결합을 도입시키는 방법을 검토하였다. HA와 히드라진을 각각 처리하거나 2단계 또는 동시 처리하여 개질시킨 PAN 시료들의 반응도, 물 및 N,N'-디메틸포름아미드(DMF) 팽윤도, FTIR 스펙트럼, 원소함량, 열분석 결과들을 분석하여 효율적으로 기능기와 가교결합을 도입시키는 방법을 제시하였다. PAN 필름은 HA와의 반응에 의해 기능기가 도입되고 친수성이 향상되지만 형태안정성이 감소하며, 히드라진 처리에 의해 DMF 팽윤도가 감소한다. 히드라진 및 HA를 2단계로 처리하면 형태안정성은 향상되지만 기능기 도입이 어려워지고, 히드라진과 HA를 동시에 처리하면 형태안정성과 친수성을 효율적으로 향상시킬 수 있다.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.344-351
• /
• 2020

AgInCd alloy is widely used as neutron absorber in nuclear reactors. However, the AgInCd control rods may fail during service due to the irradiation swelling. In the present study, a calculational method is proposed to calculate the composition change of the AgInCd absorber. Calculated results show that neutron fluence has significant impact on the chemical compositions. Ag and In contents gradually decrease while Cd and Sn conversely increases from the center to the rim of AgInCd absorber due to the depression of neutron flux. The composition change at the surface is higher almost two times than that at the center. Based on the calculated compositions, six simulated AgInCdSn alloys were prepared and examined. With the increase of Cd and Sn, the simulated AgInCdSn alloys transform from a single fcc phase into the mixed fcc and hcp phases, and finally into the single hcp phase. The atomic volume of the hcp phase is obviously larger than the fcc phase. The fcc-hcp transformation results in considerable volume swelling of the AgInCd absorber. Moreover, the lattice parameters of the fcc and hcp phases gradually increase with Cd and Sn contents, which also can induce small volume swelling.

• 한국방사선학회논문지
• /
• 제15권2호
• /
• pp.265-271
• /
• 2021

수목의 내부 부후의 양상은 많은 원인에 의존한다. 이런 다양한 부후의 원인은 일반적인 방법으로는 탐지가 어렵기 때문에 장기간 부후 상태를 확인할 수 없다면 부후 부위의 확대로 인해 수목의 심각한 피해가 발생할 수 있다. 수목 단층 영상을 획득하는 방식은 센서를 고무망치로 두드려 수목을 통과하는 임펄스가 생성되어 이동하는 속도를 기록한다. 본 논문에서는 물리적 손상에 의한 균열, 공동, 부후를 측정할 수 있도록 Arbotom에서 획득한 수목 단면 영상을 이용하여 수목의 내부 상태를 알 수 있는 3D 뷰어를 개발하여 수목 내부의 부후가 진행된 정도를 파악하고 이를 바탕으로 수목의 외과적 수술이 필요한 경우 참고할 수 있는 데이터를 제시하고자 하였다. 수목의 단층 영상을 획득하기 위해 세 그루의 양버즘 나무와 단풍 나무에 6개의 센서를 부착하여 1m 길이의 나무를 Arbotom 프로그램을 이용하여 측정하였으며 MATLAB을 이용하여 제작한 3D Viewer를 통하여 3D 영상을 구현하였다. 단순히 영상의 획득 뿐만 아니라 수목의 단면 길이와 부피를 측정하였으며 실제로 제작한 3D Viewer에서 단풍 나무의 부후가 발생된 부분 길이는 33.12 cm, 양버즘 나무의 부후는 21.41 cm로 측정되었으며 단풍 나무의 부후의 부피는 78.832 ㎤로 측정되었다. Arbotom의 단면 영상과 3D 영상을 비교한 결과 수목의 실제 양상과 같은 결과를 획득하였기 때문에 제작된 소프트웨어 신뢰성 또한 확보된 것으로 판단할 수 있으며 제작된 Viewer를 통하여 외과적 수목 수술에 적용할 데이터를 제공해 수목의 피해를 최소화 할 것으로 사료된다.

• KSBB Journal
• /
• 제16권3호
• /
• pp.264-268
• /
• 2001

The extraction efficiencies of panaxynol and panaxydol were optimal at 80$^{\circ}C$ with soxhlet method. The extraction efficiencies increased up to 45$^{\circ}C$ with shaking method. Amounts of panaxynol and panaxydol were determined by gas chromatography. Extracted quantities of panaxynol and panaxydol using the shaking method increased over a period of 14 hours. The efficiencies of panaxynol and panaxydol extraction by soxhlet and shaking methods were higher for smaller particle sizes. Upon water swelling treatment, extraction efficiencies of panaxynol and panaxydol decreased gradually with time for both methods.