• 문화기술의 융합
• /
• 제10권2호
• /
• pp.511-516
• /
• 2024

최근 제정된 궤도시설의 성능평가에 관한 세부지침에서 궤도성능평가의 평가절차 및 실시방법 등에 관한 필요사항을 제시하였다. 그러나 외관조사(육안조사)에 의해 레일표면손상의 등급이 결정되며, 점검자의 주관적인 판단으로 정성적인 평가에만 의존할 수밖에 없는 실정이다. 따라서 본 연구에서는 레일표면손상을 이용하여 레일내부결함까지 진단할 수 있는 진단애플리케이션을 개발하고자 하였다. 현장조사에서는 레일표면손상을 조사하고 패턴을 분석하였다. 또한 실내시험에서는 레일내부손상 이미지 데이터를 구축하기 위하여 SEM 시험을 이용하였으며, 균열 길이, 깊이 및 각도를 정량화하였다. 본 연구에서는 현장조사와 실내시험에서 구축한 이미지 데이터를 적용한 딥러닝 모델(Fast R-CNN)을 애플리케이션에 적용하였다, 스마트기기에서 사용이 가능한 딥러닝 모델을 이용한 레일표면손상 진단 애플리케이션(App)을 개발하여 향후 궤도진단 및 성능평가 업무에 활용 가능한 레일표면손상 스마트 진단시스템을 개발하였다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.570-573
• /
• 1996

The evaluation test for the operation of rotary type surface mounters which consist of the reel axis, the index table and the X-Y table, has been performed by comparing the new method with the old one in only fields. Because the problem seeking for the optimal operation of rotary type surface mounters, is NP complete, it is almost impossible to get the optimal solutions of large problems. This paper deals with a dynamic network modeling, which can reduce the effort, the cost, and the time used for the performance test of rotary type surface mounters.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.1061-1066
• /
• 2003

Chloride penetration into concrete is the main cause of the steel corrosion in concrete structures exposed to chloride-rich environments. Protective surface coatings are increasingly being applied to concrete structures to reduce chloride penetration. In this study, the performance of various surface coatings was evaluated. Most coatings showed good results for the various tests of the performance evaluation. Surface coatings can delay deterioration such as chloride-induced reinforcing bar corrosion effectively.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.176-187
• /
• 2005

This paper presents an evaluation of joint configurations of a robotic finger based on kinematic analysis. The evaluation is based on an assumption that the current control methods for the fingers require that the contact state specified by the motion planner be maintained during manipulation. Various finger-joint configurations have been evaluated for different contact motions. In the kinematic analysis, the surface of the manipulated object was represented by B-spline surface and the surface of the finger was represented by cylinders and a half ellipsoid. Three types of contact motion, namely, 1) pure rolling, 2) twist-roiling, and 3) slide-twist-rolling are assumed in this analysis. The finger-joint configuration best suited for manipulative motion is determined by the dimension of manipulation workspace. The evaluation has shown that the human-like fingers are suitable for maintaining twist-rolling and slide-twist-rolling but not for pure rolling. A finger with roll joint at its fingertip link, which is different from human fingers, proved to be better for pure rolling motion because it can accommodate sideway motions of the object. Several kinds of useful finger-joint configurations suited for manipulating objects by fingertip surface are proposed.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1019-1025
• /
• 2010

This paper describes on methods in test and evaluation of the guided rocket munitions of the domestic new generation multiple launcher rocket system. We modified and refer to the present model of air-to-air missile(AAM) and surface-to-air missile(SAM). Also we suggested a method of surface-to-surface missile(SSM) based on the characteristics of the guided rocket in test and evaluation(T&E). According to this study, the suggested activity of T&E should be observed methods compatible with each item on the established model. Therefore, we expect that the proposed research material will be a good guide to the study of a surface-to-surface missile(SSM) installed GPS/INS integration navigation guidance & control systems in the future.

• 한국응용과학기술학회지
• /
• 제37권6호
• /
• pp.1507-1516
• /
• 2020

본 연구는 도로 노면결빙 판정 알고리즘을 적용하여 도로결빙 구간에 대한 시나리오를 분석하였다. 도로결빙 알고리즘 적용을 위해서, 도로 결빙에 대한 영향인자를 검토하고, 분석을 위해서 목감IC, 정릉터널, 성산대교, 염창교 등 4지점의 관측자료를 활용하였다. 관측소는 모두 고속화도로에 설치되어 있으며, 도로 결빙 특성 분석을 위하여 분류하였다. 도로 결빙 판정 알고리즘의 노면온도-노점온도 차가 3℃ 이하일 때 도로결빙 발생 구간을 확인하고 결빙 구간의 노면상태와 수막두께 변화를 통해 도로 결빙 판정을 도출하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.839-846
• /
• 2004

The objective of this study is the evaluation of the tunneling effect on the groundwater-surface water interaction. The designed tunnel line is laid beneath the Gapo-cheon, which runs throughout study area. And, the pre-evaluation of the tunnel-influence on the Gapo-cheon is urgently needed. However, it is very difficult to find out the similar domestic and/or foreign cases. In this study, we would exclude the numerical modeling technique with insufficient data. Instead of the evaluation of the tunneling effect on the groundwater-surface water interaction with the numerical modeling, we monitored the flow rate of surface water at various point. We measured the flow rate of surface water at 5 points. With the results of surface flow, we can conclude that 39% of flow rate in Gapo-cheon is contributed by the groundwater discharge, as baseflow.

• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.539-546
• /
• 2022

현행 시설물의 안전 및 유지관리 실시 세부지침(성능평가 편)에서는 표면부 콘크리트의 품질의 평가 수단으로 표면에 품질의 저하가 없는 건전부와 겨울철 우수나 누수 등으로 표면 손상이 발생한 비건전부에 대한 표면반발경도를 측정하고 측정값을 상대비교하여 손상도를 평가하도록 규정하고 있다. 그러나 이 판정법은 동결융해 촉진 모사환경으로부터 구한 실험 DB로 도출된 상관관계를 분석하여 제안한 방법으로 실제 현장에서 수집된 DB와 비교 검토하는 등의 현장 적용성에 대한 검토가 미흡한 채 제정되었다. 따라서 이 연구에서는 국내 21개 콘크리트 교량을 대상으로 현장 조사를 실시하고 현장 적용의 적정성을 분석하였다. 분석 결과로부터 동해 손상에 따른 건전부와 비건전부의 뚜렷한 표면반발경도의 차이를 확인할 수 있어 현행 판정법의 현장 적용이 적정함을 확인할 수 있었다. 뿐만 아니라 표면 반발경도의 측정 위치 및 방법의 구체적인 제시에 대한 필요성을 제안하고, 전체 교량을 대상으로 할 때 동해 판정 등급에 대한 유효성에 대하여도 분석하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.201-203
• /
• 2012

The establishment of the technology for evaluating friction resistance and pipe pressure and the relation of the fluid characteristics and pumpability of concrete is essential for the evaluation of concrete pumping performance for high speed construction of super-tall building. So, this study focuses on quantitative evaluation of concrete fluid characteristics and surface friction resistance under the change of concrete mix proportion and pumping condition. In this study, we measured the rheology of concrete and pipe pressure and surface friction characteristics when pumping. And, relations between the rheology characteristics of concrete and pumping performance was investigated by experiment. As the result of the experiment, high regression between the surface friction and pressure gradient was confirmed. And, prediction model to evaluate the friction resistance coefficient and pipe pressure reduction coefficient was suggested.

• 비파괴검사학회지
• /
• 제25권3호
• /
• pp.215-221
• /
• 2005

It is required to evaluate nondestructively depth of surface-breaking cracks in structures. In this paper, the self-compensated technique by laser-based ultrasound is used to measure the depth of surface-breaking defect. Optical generation of ultrasound produces a well defined pulse with reliable frequency content. It is broad banded and suitable for measurement of attenuation and scattering over a wide frequency range. The self-calibrated signal transmission data of surface wave shows good sensitivity as a practical tool far assessment of surface-breaking defect depth. It is suggested that the relationship between the signal transmission and crack depth can be used to predict the surface-breaking crack depths in structures.