• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.21-27
• /
• 1998

Electrical and optical characteristics of ZnS:Mn/ZnS:Tb multilayer TFEL devices were investigated for multi-color electroluminescent display applications. Emission spectra of M $n^{2+}$ and T $b^{3+}$ ions were observed from ZnS:Mn/ZnS:Tb multi-layer TFEL devices, and were very broad from 540 nm to 640 nm. Saturation luminance measured at 155 V was 1025 Cd/$m^2$. C-V, $Q_{t}$ - $V_{p}$ curves showed that the phosphor capacitance ( $C_{p}$ ) and the insulator capacitance ( $C_{i}$ ) were 13.5nF/$\textrm{cm}^2$ and 60 nF/$\textrm{cm}^2$, respectively. Threshold voltage( $V_{thl}$) was shown to decrease from 126 V to 93 V due to the increase of the applied voltage from 155 V to 185 V, which was attributed to the increase of the polarization charge. The equation for the calculation of the threshold voltage as a function of the applied voltage was proposed for the first time. The calculated threshold voltage agreed well with the data obtained from the measurement.t.t.t.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.609-612
• /
• 2001

An adaptive sub-optimal method using a preset threshold for combining partial transmit sequence (PTS) of an orthogonal frequency division multiplexing (OFDM) signal is presented. The results show that adaptive sub-optimal method reduces the 0.1% PAP by 3.4dB, while iterative flipping method reduces it by 3dB and PTS reduce it by 4.1dB. The complexity of adaptive sub-optimal method is 2.4% of that of PTS method for M=8.

• Wind and Structures
• /
• v.1 no.1
• /
• pp.25-42
• /
• 1998

Improvements to the Gumbel method of extreme value analysis of wind data made over the last two decades are reviewed and illustrated using sample data for Jersey. A new procedure for extending the Gumbel method to include M-th highest annual extremes is shown to be less effective than the standard method, but leads to a method for calibrating peak-over-threshold methods against the standard Gumbel approach. Peak-over-threshold methods that include at least the 3rd highest annual extremes, specifically the modified Jensen and Franck method and the "Method of independent storms" are shown to give the best estimates of extremes from observations.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.4
• /
• pp.258-264
• /
• 2004

This paper propose a method that GOP structure based on the picture complexity change realtime adaptive without pre-analysis or time delay. Proposed algorithm calculates the complexity of pictures at first, and the ratio of the complexity( X$\sub$p/ /X$\sub$i/) between P picture and I picture is calculated. The suitable M value for the three picture select by comparing with predetermined threshold. Used bit and vbv_delay the value of GOP is calculated according to selected M. Experimental results show that the prediction error is reduce than the fixed GOP structure. Since the complexity distribution of the sequence is different, applied limits of threshold value is changed, also.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.331-338
• /
• 2014

A charge-pump circuit using a current-bypass technique, which suppresses charge sharing and reduces the sub-threshold currents, helps to decrease phase-locked loop (PLL) jitter without resorting to a feedback amplifier. The PLL shows no stability issues and no power-up problems, which may occur when a feedback amplifier is used. The PLL is implemented in 0.11-${\mu}m$ CMOS technology to achieve 0.856-ps RMS and 8.75-ps peak-to-peak jitter, which is almost independent of ambient temperature while consuming 4 mW from a 1.2-V supply.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.275-278
• /
• 2002

As the gate lengths of MOSFETs are scaled down to sub-50nm regime, there are key issues to be considered in the device design. In this paper, we have investigated the characteristics of threshold voltage for MOSFET device. We have simulated the MOSFETs with gate lengths from 100nm to 30nm using generalized scaling. Then, we have known the device scaling limits for nano structure MOSFET. We have determined the threshold voltages using LE(Linear Extraction) method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.261-263
• /
• 2002

CMOS devices have scaled down to sub-50nm gate to achieve high performance and high integration density. Key challenges with the device scaling are non-scalable threshold voltage( $V^{th}$ ), high electric field, parasitic source/drain resistance, and $V^{th}$ variation by random dopant distribution. To solve scale-down problem of conventional structure, a new structure was proposed. In this paper, we have investigated double-gate MOSFET structure, which has the main-gate and the side-gates, to solve these problem.

• Journal of Adhesion and Interface
• /
• v.22 no.3
• /
• pp.91-97
• /
• 2021

By introducing an organic interlayer on the Parylene C dielectric surface, the electrical device performances and the operating stabilities of organic field-effect transistors (OFETs) were improved. To achieve this goal, hexamethyldisilazane (HMDS) and octadecyltrichlorosilane (ODTS), as the organic interlayer materials, were used to control the surface energy of the Parylene C dielectrics. For the bare case used with the pristine Parylene C dielectrics, the field-effect mobility (μ_FET) and threshold voltage (V_th) of dinaphtho[2,3-b:2',3'-f ]thieno[3,2-b]- thiophene (DNTT) FET devices were measured at 0.12 cm²V^-1s^-1 and - 5.23 V, respectively. On the other hand, the OFET devices with HMDS- and ODTS-modified cases showed the improved μ_FET values of 0.32 and 0.34 cm²V^-1s^-1, respectively. More important point is that the μ_FET and V_th of the DNTT FET device with the ODTS-modified Parylene C dielectric presented the smallest changes during a repeated measurement of 1000 times, implying that it has the most stable operating stability. The results could be meaned that the organic interlayer, especially ODTS, effectively covers the Parylene C dielectric surface with alkyl chains and reduces the charge trapping at the interface region between active layer and dielectric, thereby improving the electrical operating stability.

• Applied Microscopy
• /
• v.50
• /
• pp.27.1-27.6
• /
• 2020

Transition metal dichalcogenides (TMD), which is composed of a transition metal atom and chalcogen ion atoms, usually form vacancies based on the knock-on threshold of each atom. In particular, when electron beam is irradiated on a monolayer TMD such as MoS₂ and WS₂, S vacancies are formed preferentially, and they are aligned linearly to constitute line defects. And then, a hole is formed at the point where the successively formed line defects collide, and metal clusters are also formed at the edge of the hole. This study reports a process in which the line defects formed in a monolayer WS₂ sheet expends into holes. Here, the process in which the W cluster, which always occurs at the edge of the formed hole, goes through a uniform intermediate phase is explained based on the line defects and the formation behavior of the hole. Further investigation confirms the atomic structure of the intermediate phase using annular dark field scanning transition electron microscopy (ADF-STEM) and image simulation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.1
• /
• pp.40-50
• /
• 2011

A two-dimensional (2D) analytical model for the potential distribution and threshold voltage of short-channel ion-implanted GaAs MESFETs operating in the sub-threshold regime has been presented. A double-integrable Gaussian-like function has been assumed as the doping distribution profile in the vertical direction of the channel. The Schottky gate has been assumed to be semi-transparent through which optical radiation is coupled into the device. The 2D potential distribution in the channel of the short-channel device has been obtained by solving the 2D Poisson's equation by using suitable boundary conditions. The effects of excess carrier generation due to the incident optical radiation in channel region have been included in the Poisson's equation to study the optical effects on the device. The potential function has been utilized to model the threshold voltage of the device under dark and illuminated conditions. The proposed model has been verified by comparing the theoretically predicted results with simulated data obtained by using the commercially available $ATLAS^{TM}$ 2D device simulator.