• 한국초전도ㆍ저온공학회논문지
• /
• 제6권1호
• /
• pp.22-27
• /
• 2004

It is important to mechanical properties of dielectric paper and cable to optimum electrical insulation design of HTS cable, because the cable has experience of mechanical stress, such as tensile stress, bending stress. Also, it is operated at cryogenic temperature. From the results, it was observed that the tensile strength of PPLP in liquid nitrogen was high more than that of air, but tensile strain decrease sharply. According as tensile strength increases, the breakdown stress of PPLP in liquid nitrogen is decreased. Because PPLP was deteriorated by microcrack and tensile strain. According as bending radius multiple is decrease, the ac and impulse breakdown stress of mini-model cable is sharply decreased.

• Journal of the Korean Data and Information Science Society
• /
• 제21권5호
• /
• pp.935-944
• /
• 2010

In this paper, we develop the noninformative priors for the reliability in a stress-strength model where a strength X and a stress Y have independent exponential distributions with different scale parameters and a common location parameter. We derive the reference priors and prove the propriety of joint posterior distribution under the general prior including the reference priors. Through the simulation study, we show that the proposed reference priors match the target coverage probabilities in a frequentist sense.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.27-38
• /
• 2003

본 연구에서는 불포화토의 전단강도 특성과 이를 예측하는 모델에 대해 다루었다. 특히, 순연직응력(net normal stress)이 흙수분 특성곡선에 미치는 영향과 불포화토의 전단강도 발현에 미치는 영향에 대해 중점적으로 연구하였다. 이를 위해서 국내에 산재해 있는 화강풍화잔적토를 시료로 하여 불포화삼축압축 시험과 SWCC 시험 등을 실시하였으며, 특히, 순연직응력을 일정하게 유지시킨 상태에서 SWCC를 구할 수 있게 끔 기존의 장비를 개량하였다. 불포화토의 전단강도 시험결과와 기존의 강도예측모델에 의해 예측된 강도포락선을 비교해 본 결과, 흙수분 특성곡선과 흡인력 (matric suction)을 한 축으로 하는 강도포락선의 기울기가 순연직응력에 따라 변화함을 발견할 수 있었다. 따라서, 보다 정확하게 불포화토의 전단강도 포락선을 묘사하기 위해서는 흡인력에 미치는 순연직응력의 영향이 고려되어야 하는 것으로 나타났다. 본 논문에서는 기 언급한 내용에 근거하여 수정된 불포화토 전단강도 예측모델을 제안하였다.

• Communications for Statistical Applications and Methods
• /
• 제3권3호
• /
• pp.187-194
• /
• 1996

We treat the problem of estimating reliability R = P[Y < X] in the stress-strength model in which a unit of strength X is subfected to enviromental stress Y./ In this paper several nonparametric approaches to estimation of R are analyzed and compared by simulations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.406-412
• /
• 1997

This paper presents the newly developed model for the stress-strain relationship of ultra high- strength concrete on the basis of the more refined statistical to analysis the various test results available in the literature to be more rigorous in accuracy and generalized scheme. Through the comprehensive analysis of the previously existing equations for each model, multiple curves equation has turned out to be most appropriate to simulate the linearly varying ascending branch and brittle type of descending one. The principal variables to model the stress-strain relationship such as the modulus of elasticity, ultimate strain and deformation characteristics due to stress softening phenomenon were extensively studied to be simplified in the function of the concrete compressive strength.

• 품질경영학회지
• /
• 제22권3호
• /
• pp.99-110
• /
• 1994

The strength-stress model has been widely used in a variety of areas including testing the reliability of the item or design procedures. This model was first introduced in 1950's and can be found on various applications in civil, aerospace engineering etc. This paper considers the strength-stress model in detail and proposes an estimator which deals with the reliability estimation problem based on censored observations in the strength variables.

• 콘크리트학회논문집
• /
• 제23권3호
• /
• pp.365-376
• /
• 2011

현행 콘크리트구조설계기준(2007)은 콘크리트 구조물의 설계에 적용하는 콘크리트의 압축응력 분포로 ACI 318의 등가 직사각형 응력 분포를 규정하고 있다. 단면의 휨강도 해석에는 등가 직사각형 응력 분포가 충분하겠지만, 성능 중심 설계의 한계 상태 검증에는 실제와 가까운 압축응력-변형률 관계가 필요하다. 또 등가 직사각형 응력 분포는 고강도 콘크리트 기둥의 휨강도 해석에 비안전측의 결과를 준다는 것이 알려져 있으므로, 이를 대신하는 새로운 응력 분포 모델이 필요하다. 이 연구에서는 Eurocode와 일본 토목학회의 설계기준에서 채택하고 있는 포물선-직선 형상의 새로운 모델을 제안하였다. 이 응력 분포 모델은 이 연구에서 수행된 압축응력 분포 실험과 타 연구자들의 실험 결과를 분석하여 도출된 것으로서, 보통 강도뿐만 아니라 고강도 콘크리트를 포함한 것이다. 제안 모델의 특성은 미국 ACI 318, 캐나다 CSA, 유럽의 Eurocode, 일본 토목학회 설계기준의 응력 분포 모델과 함께 실험 결과와 비교하여 정리하였다.

• Steel and Composite Structures
• /
• 제33권4호
• /
• pp.489-507
• /
• 2019

In order to obtain high bearing capacity and good ductility simultaneously, a structural column with hybrid normal and high strength steel (HNHSS) welded box section has been developed. Residual stress is an important factor that can influence the behaviour of a structural member in steel structures. Accordingly, the magnitudes and distributions of residual stresses in HNHSS welded box sections were investigated experimentally using the sectioning method. In this study, the following four box sections were tested: one normal strength steel (NSS) section, one high strength steel (HSS) section, and two HNHSS sections. Based on the experimental data from previous studies and the test results of this study, the effects of the width-to-thickness ratio of plate, yield strength of plate, and the plate thickness of the residual stresses of welded box sections were investigated in detail. A unified residual stress model for NSS, HSS and HNHSS welded box sections was proposed, and the corresponding simplified prediction equations for the maximum tensile residual stress ratio (${\sigma}_{rt}/f_y$) and average compressive residual stress ratio (${\sigma}_{rc}/f_y$) in the model were quantitatively established. The predicted magnitudes and distributions of residual stresses for four tested sections in this study by using the proposed residual stress model were compared with the experimental results, and the feasibility of this proposed model was shown to be in good agreement.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.747-758
• /
• 2003

The moment-curvature envelope describes the changes in the flexural capacity with deformation during a nonlinear analysis. Therefore, the moment-curvature analysis for reinforced concrete columns, indicating the available flexural strength and ductility, can be conducted providing the stress-strain relation for the concrete and steel are known. The moments and curvatures associated with increasing flexural deformations of the column may be computed for various column axial loads by incrementing the curvature and satisfying the requirements of strain compatibility and equilibrium of forces. Clearly it is important to have accurate information concerning the complete stress-strain curve of confined high-strength concrete in order to conduct reliable moment-curvature analysis that assesses the ductility available from high-strength concrete columns. However, it is not easy to explicitly characterize the mechanical behavior of confined high-strength concrete because of various parameter values, such as the confinement type of rectilinear ties, the compressive strength of concrete, the volumetric ratic and strength of rectangular ties. So a stress-strain model is developed which can simulate complete inelastic moment-curvature relations of high-strength concrete columns.

• 품질경영학회지
• /
• 제39권1호
• /
• pp.90-97
• /
• 2011

The purpose of this study is to analyze various factors comprising a job satisfaction; determine possible factors that affects job satisfaction. Job satisfaction model is designed to evaluate major factors, such as job stress and strength, and to assess relationship between these factors. Partial least squares algorithm is used to develop a job satisfaction measurement model. To evaluate validity of developed model, survey data of health insurance review and assessment service is to applied.