Browse > Article
http://dx.doi.org/10.12989/scs.2019.33.4.489

Investigation of residual stresses of hybrid normal and high strength steel (HNHSS) welded box sections  

Kang, Lan (School of Civil Engineering and Transportation, South China University of Technology)
Wang, Yuqi (School of Civil Engineering and Transportation, South China University of Technology)
Liu, Xinpei (School of Civil Engineering, Faculty of Engineering & Information Technologies, The University of Sydney)
Uy, Brian (School of Civil Engineering, Faculty of Engineering & Information Technologies, The University of Sydney)
Publication Information
Steel and Composite Structures / v.33, no.4, 2019 , pp. 489-507 More about this Journal
Abstract
In order to obtain high bearing capacity and good ductility simultaneously, a structural column with hybrid normal and high strength steel (HNHSS) welded box section has been developed. Residual stress is an important factor that can influence the behaviour of a structural member in steel structures. Accordingly, the magnitudes and distributions of residual stresses in HNHSS welded box sections were investigated experimentally using the sectioning method. In this study, the following four box sections were tested: one normal strength steel (NSS) section, one high strength steel (HSS) section, and two HNHSS sections. Based on the experimental data from previous studies and the test results of this study, the effects of the width-to-thickness ratio of plate, yield strength of plate, and the plate thickness of the residual stresses of welded box sections were investigated in detail. A unified residual stress model for NSS, HSS and HNHSS welded box sections was proposed, and the corresponding simplified prediction equations for the maximum tensile residual stress ratio (${\sigma}_{rt}/f_y$) and average compressive residual stress ratio (${\sigma}_{rc}/f_y$) in the model were quantitatively established. The predicted magnitudes and distributions of residual stresses for four tested sections in this study by using the proposed residual stress model were compared with the experimental results, and the feasibility of this proposed model was shown to be in good agreement.
Keywords
residual stress; hybrid box section; sectioning method; high strength steel;
Citations & Related Records
Times Cited By KSCI : 9  (Citation Analysis)
연도 인용수 순위
1 Gou, R., Yu, M., Zhang, Y. and Xu, X. (2014), "Residual stress measurement of 1500 m(3) spherical tanks by X-ray diffraction method", Insight, 56(1), 26-30. https://doi.org/10.1784/insi.2014.56.1.26   DOI
2 Hwang, I.-H., Chun, H.-J., Hong, I.-P., Park, Y.-B. and Kim, Y.-J. (2015), "Change of transmission characteristics of FSSs in hybrid composites due to residual stresses", Steel Compos. Struct., Int. J., 19(6), 1501-1510. https://doi.org/10.12989/scs.2015.19.6.1501   DOI
3 Javidan, F., Heidarpour, A., Zhao, X.L. and Minkkinen, J. (2016), "Application of high strength and ultra-high strength steel tubes in long hybrid compressive members: Experimental and numerical investigation", Thin-Wall. Struct., 102, 273-285. https://doi.org/10.1016/j.tws.2016.02.002   DOI
4 Javidan, F., Heidarpour, A., Zhao, X.-L. and Al-Mahaidi, R. (2018), "Structural coupling mechanism of high strength steel and mild steel under multiaxial cyclic loading", Steel Compos. Struct., Int. J., 27(2), 229-242. https://doi.org/10.12989/scs.2018.27.2.229
5 Jiang, J., Lee, C.K. and Chiew, S.P. (2015), "Residual stress and stress concentration effect of high strength steel built-up box Tjoints", J. Constr. Steel Res., 105, 164-173. https://doi.org/10.1016/j.jcsr.2014.11.008   DOI
6 Kang, L., Ge, H.B., Suzuki, M. and Wu, B. (2018a), "An average weight whole-process method for predicting mechanical and ductile fracture performances of HSS Q690 after a fire", Constr. Build. Mater., 191, 1023-1041. https://doi.org/10.1016/j.conbuildmat.2018.10.068   DOI
7 Kang, L., Suzuki, M., Ge, H.B. and Wu, B. (2018b), "Experiment of ductile fracture performances of HSSS Q690 after a fire", J. Constr. Steel Res., 146, 109-121. https://doi.org/10.1016/j.jcsr.2018.03.010   DOI
8 Khan, M., Paradowska, A., Uy, B., Mashiri, F. and Tao, Z. (2016), "Residual stresses in high strength steel welded box sections", J. Constr. Steel Res., 116, 55-64. https://doi.org/10.1016/j.jcsr.2015.08.033   DOI
9 Klotz, U.E., Zgraggen, M., Von Trzebiatowski, O., Schindler, H.J., Winkler, M. and Pitschieler, K. (2002), "Residual stress measurement on a welded box beam section", Materialwissenschaft Und Werkstofftechnik. 33(9), 544-549. https://doi.org/10.1002/1521-4052(200209)33:9<544::AIDMAWE544>3.0.CO;2-4   DOI
10 Li, T.-J., Li, G.-Q. and Wang, Y.-B. (2015), "Residual stress tests of welded Q690 high-strength steel box- and H-sections", J. Constr. Steel Res., 115, 283-289. https://doi.org/10.1016/j.jcsr.2015.08.040   DOI
11 Lian, M., Su, M.Z. and Guo, Y. (2015), "Seismic performance of eccentrically braced frames with high strength steel combination", Steel Compos. Struct., Int. J., 18(6), 1517-U217. https://doi.org/10.12989/scs.2015.18.6.1517   DOI
12 Nagaraja Rao, N. and Tall, L. (1961), "Residual stresses in welded plates", Welding J., 40(10), 468-s-105-s.
13 Nie, S., Zhu, Q., Yang, B. and Li, P. (2018), "Investigation of residual stresses in Q460GJ steel plates from medium-walled box sections", J. Constr. Steel Res., 148, 728-740. https://doi.org/10.1016/j.jcsr.2018.06.028   DOI
14 Somodi, B. and Kovesdi, B. (2017), "Residual stress measurements on cold-formed HSS hollow section columns", J. Constr. Steel Res., 128, 706-720. https://doi.org/10.1016/j.jcsr.2016.10.008   DOI
15 Qiang, X.H., Jiang, X., Bijlaard, F.S.K. and Kolstein, H. (2016), "Mechanical properties and design recommendations of very high strength steel S960 in fire", Eng. Struct., 112, 60-70. https://doi.org/10.1016/j.engstruct.2016.01.008   DOI
16 Rasmussen, K.J.R. and Hancock, G.J. (1988), "Deformations and residual stresses induced in channel section columns by presetting and welding", J. Constr. Steel Res., 11(3), 175-204. https://doi.org/10.1016/0143-974X(88)90041-7   DOI
17 Saliba, N.G., Tawk, I. and Gergess, A.N. (2018), "Finite element modeling of rolled steel shapes subjected to weak axis bending", Steel Compos. Struct., Int. J., 29(2), 161-173. https://doi.org/10.12989/scs.2018.29.2.161
18 Somodi, B. and Koevesdi, B. (2018), "Residual stress measurements on welded square box sections using steel grades of S235-S960", Thin-Wall. Struct., 123, 142-154. https://doi.org/10.1016/j.tws.2017.11.028   DOI
19 Wang, Y.-B., Li, G.-Q. and Chen, S.-W. (2012), "The assessment of residual stresses in welded high strength steel box sections", Journal of Constructional Steel Research. 76, 93-99. https://doi.org/10.1016/j.jcsr.2012.03.025   DOI
20 Tebedge, N., Alpsten, G. and Tall, L. (1973), "Residual-stress measurement by the sectioning method", Experim. Mech., 13(2), 88-96. https://doi.org/10.1007/BF02322389   DOI
21 Wang, W.Y., Qin, S.Q., Kodur, V. and Wang, Y.H. (2018), "Experimental study on evolution of residual stress in welded box-sections after high temperature exposure", Adv. Steel Constr., 14(1), 73-89. https://doi.org/10.18057/IJASC.2018.14.1.5
22 Zhang, X., Huang, Z., Chen, B., Zhang, Y., Tong, J., Fang, G. and Duan, S. (2019), "Investigation on residual stress distribution in thin plate subjected to two sided laser shock processing", Optics Laser Technol., 111, 146-155. https://doi.org/10.1016/j.optlastec.2018.09.035   DOI
23 Wang, Z., Deng, L. and Zhao, J. (2019), "A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test", Mater. Res. Express, 6(3), 036512. https://doi.org/10.1088/2053-1591/aaeca6   DOI
24 Yuan, H.X., Wang, Y.Q., Shi, Y.J. and Gardner, L. (2014), "Residual stress distributions in welded stainless steel sections", Thin-Wall. Struct., 79, 38-51. https://doi.org/10.1016/j.tws.2014.01.022   DOI
25 Zhang, X., Liu, S., Zhao, M. and Chiew, S.-P. (2016), "Residual stress of cold-formed thick-walled steel rectangular hollow sections", Steel Compos. Struct., Int. J., 22(4), 837-853. https://doi.org/10.12989/scs.2016.22.4.837   DOI
26 Taheri-Behrooz, F., Aliha, M.R.M., Maroofi, M. and Hadizadeh, V. (2018), "Residual stresses measurement in the butt joint welded metals using FSW and TIG methods", Steel Compos. Struct., Int. J., 28(6), 759-766. https://doi.org/10.12989/scs.2018.28.6.759
27 Besevic, M. (2012), "Experimental investigation of residual stresses in cold formed steel sections", Steel Compos. Struct., Int. J., 12(6), 465-489. https://doi.org/10.12989/scs.2012.12.6.465   DOI
28 An, G., Woo, W. and Park, J. (2019), "Welding residual stress effect in fracture toughness", J. Nanosci. Nanotech., 19(4), 2323-2328. https://doi.org/10.1166/jnn.2019.16008   DOI
29 ANSI/AISC360-10 (2010), Specification for Structural Steel Buildings; American Institute of Steel Construction, Chicago, IL, USA.
30 Ban, H.Y., Shi, G., Shi, Y.J. and Wang, Y.Q. (2013), "Residual stress of 460 MPa high strength steel welded box section: Experimental investigation and modeling", Thin-Wall. Struct., 64, 73-82. https://doi.org/10.1016/j.tws.2012.12.007   DOI
31 Cai, Y. and Young, B. (2019), "Experimental investigation of carbon steel and stainless steel bolted connections at different strain rates", Steel Compos. Struct., Int. J., 30(6), 551-565. https://doi.org/10.12989/scs.2019.30.6.551
32 Cao, X., Xu, Y., Wang, M., Zhao, G., Gu, L. and Kong, Z. (2018), "Experimental study on the residual stresses of 800 MPa high strength steel welded box sections", J. Constr. Steel Res., 148, 720-727. https://doi.org/10.1016/j.jcsr.2018.06.019   DOI
33 Chen, X. and Shi, G. (2019), "Cyclic tests on high strength steel flange-plate beam-to-column joints", Eng. Struct., 186, 564-581. https://doi.org/10.1016/j.engstruct.2019.01.093   DOI
34 Chen, Z., Liu, X. and Zhou, W. (2018), "Residual bond behavior of high strength concrete-filled square steel tube after elevated temperatures", Steel Compos. Struct., Int. J., 27(4), 509-523. https://doi.org/10.12989/scs.2018.27.4.509
35 European Convention for Constructional Steelworks (ECCS) (1976), Manual on stability of steel structures: Part 2.2. Mechanical properties and residual stresses; ECCS Publ., Bruxelles, Belgium.
36 Choi, J.Y. and Kwon, Y.B. (2018), "Direct strength method for high strength steel welded section columns", Steel Compos. Struct., Int. J., 29(4), 509-526. https://doi.org/10.12989/scs.2018.29.4.509
37 Estuar, F. and Tall, L. (1963), "Experimental investigation of welded built-up columns", Welding J., 42, 164-s-176-s.
38 Eurocode 3 (2005), Design of Steel Structures-Part 1-1: General Rules and Rules for Buildings; European Committee for Standardization, Brussels, Belgium.
39 Fang, H., Chan, T.-M. and Young, B. (2018), "Structural performance of cold-formed high strength steel tubular columns", Eng. Struct., 177, 473-488. https://doi.org/10.1016/j.engstruct.2018.09.082   DOI
40 Farahi, M. and Erfani, S. (2017), "Employing a fiber-based finitelength plastic hinge model for representing the cyclic and seismic behaviour of hollow steel columns", Steel Compos. Struct., Int. J., 23(5), 501-516. https://doi.org/10.12989/scs.2017.23.5.501   DOI
41 Feng, L. and Qian, X. (2018), "Low cycle fatigue test and enhanced lifetime estimation of high-strength steel S550 under different strain ratios", Marine Struct., 61, 343-360. https://doi.org/10.1016/j.marstruc.2018.06.011   DOI
42 Gardner, L., Bu, Y. and Theofanous, M. (2016), "Laser-welded stainless steel I-sections: Residual stress measurements and column buckling tests", Eng. Struct., 127, 536-548. https://doi.org/10.1016/j.engstruct.2016.08.057   DOI
43 GB50017-2017 (2017), Code for design of steel structures; China Planning Press, Beijing, China.