• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.389-396
• /
• 2002

The purpose of this study was to compare the microtensile bonding strength of chemomechanically excavated dentin($Carisolv^{TM}$) to conventional caries removal(bur). The following adhesive systems were used; AB: All-Bond 2(3M, USA), PB: Prime & Bond 2.1(Dentsply, DE), AQ: AQ Bond(sun medical, Japan). 42 human molars with occlusal caries were assigned to 6 groups. Sequential caries removal was controlled with laser fluorescence. Each group was devided as follows; group A, B, C were $Carisolv^{TM}$ applied, group D,E,F were bur used. In group A and D, AB was used as a dentin adhesive. group B,E and group C,F was AQ and AQ was used each. The cavity was filled with composite resin(Z-100). The specimens were sectioned vertically into multiple serial 0.7 mm thick slabs. And then those slabs were sectioned into rectangular parts under 0.7 mm width. Finally 0.7-1.0 mm a right hexahedron shape stick become. Microtensile bonding test was carried out with testing apparatus at cross-head speed of $0.5\;mm/min^{-1}$ and fractured surfaces were observed with scanning electron microscope(JSM-6400, Jeol, Japan). The obtained results were summarized as follows ; 1. In the group of caries removal with $Carisolv^{TM}$, micro-tensile bonding strength decreased to $75.8{\sim}80$ percent of bur used group. 2. In the group of caries removal with $Carisolv^{TM}$, decreased degree of micro-tensile bonding strength is not so different in 3 kinds of dentin adhesives(p<0.05). 3. In the group of caries removal with $Carisolv^{TM}$, microtensile bonding strength of AB, PB, AQ was 32.6MPa(2.4), 30.1Mpa (1.8), 21.2Mpa(1.9). 4. In the group of caries removal with Bur and $Carisolv^{TM}$, microtensile bonding strength of AQ was significantly lower than that of AB and PB(p<0.01).

• Korea and Global Affairs
• /
• v.2 no.1
• /
• pp.69-92
• /
• 2018

North Korea conducted a total of six nuclear tests from the 1st test of 2006 to September, 2017. North Korea developed an armed forces security strategy at the level of regime protection and defense to respond to U.S. hostile policy. However, it is certain that strategic goals of North Korea's nuclear test were to overcome a crisis in North Korea's regime through US-North Korea negotiation and complete nuclear armed forces for socialist unification on the Korean Peninsula. North Korea's continuous nuclear test is a direct factor in threatening peace on the Korean Peninsula and an indirect factor in security dynamics of Northeast Asia. The U.N. Security Council has enforced sanctions against North Korea through six resolutions against North Korea's reckless nuclear test for the past 10 years. However, Kim Jong-Un's regime is in a position to stick to simultaneous pursuit of nuclear and economic development in spite of anti-North sanction of international society including U.N. and U.S.A. It is understood that North Korea was stimulated to conduct intense nuclear test as U.N. and U.S.A's anti-North sanction was not effective on North Korea. Full-scale and local wars are expected as military options, one of anti-North sanctions of the Trump administration. The Trump administration has attempted diplomatic pressure strategy as a secondary boycott unlike previous administrations. Nevertheless, North Korea has stood against U.N. and U.S.A's anti-North sanction with brinkmanship tactics, announcing full-scale military confrontation against U.S. It is judged that North Korea will pursue simultaneous nuclear weapons and economic development in terms of regime survival. North Korea will have less strategic choices in that its regime may collapse because of realistic national strategy between U.S.A. and China.

• Korean Journal of Plant Resources
• /
• v.16 no.3
• /
• pp.264-274
• /
• 2003

Many potato genetic resources have been collected and improved for their diverse traits over the years using breeding program in KPGR. To select potential varieties for table and processing in Korea, 58 elite potato breeding lines and several 'Valley' varieties were cultivated and harvested at Korea Alpine area in 2001. The cultivated lines and varieties were evaluated using their cultural adaptability in the environment and tuber characteristics, such as the depth of tuber eye, tuber shape, skin color, flesh color, scab resistance, yield, and the resistance of hollow heart and internal brown spot disease. Additionally, in the selection of potential processing varieties, reducing sugar content (sum of glucose and fructose concentration) of tubers is critically considered, because it mainly influence on the chip color of processing potato tuber. For table stock varieties with white skin color, 'Early Valley', 'Summer Valley', 'Winter Valley', and 'Taebok Valley' were selected. In the aspect of diverse potato tuber color, several varieties were selected such as 'Golden Valley' for its yellow fresh and skin color, 'Gogu Valley', 'Juice Valley', and 'Rose Valley' for their red skin color, and 'Purple Valley' for its purple skin. Compared with world wide known processing cultivar 'Atlantic', 24 lines (or varieties) were selected for the potential potato processing industry due to their low reducing sugar contents (below 0.3％), high yield (above 4.0 ton/ha), and unique chip colors. Selected white chipping varieties were 'Taedong Valley', 'Kangshim Valley', and 'Kangwon Valley', which have 0.23％, 0.27％, and 0.29％ of reducing sugar contents, respectively. 'Bora Valley', having deep purple color in both skin and fresh, was selected for purple chip variety and has 0.26％ of reducing sugar content. Light yellow chip varieties (lines) were 'Rose Valley' and Valley 54, having 0.19％ and 0.269％ of reducing sugar content, respectively. For French frying potatoes, 'Stick Valley' of 0.22％ and Valley 72 of 0.151％ in reducing sugars were selected. All of these selected lines and 'Valley' varieties can be used as parents to improve potato genetic resources and to develop better varieties with unique traits and colors.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.280-289
• /
• 2011

Objectives: The purpose of this study was to evaluate ${\mu}TBS$ (microtensile bond strength) of current dentin bonding adhesives which have different hydrophobicity with low-shrinkage silorane resin. Materials and Methods: Thirty-six human third molars were used. Middle dentin was exposed. The teeth were randomly assigned to nine experimental groups: Silorane self-etch adhesives (SS), SS + phosphoric acid etching (SS + pa), Adper easy bond (AE), AE + Silorane system bonding (AE + SSb), Clearfil SE bond (CSE), CSE + SSb, All-Bond 2 (AB2), AB2 + SSb, All-Bond 3 (AB3). After adhesive's were applied, the clinical crowns were restored with Filtek LS (3M ESPE). The 0.8 mm ${\times}$ 0.8 mm sticks were submitted to a tensile load using a Micro Tensile Tester (Bisco Inc.). Water sorption was measured to estimate hydrophobicity adhesives. Results: ${\mu}TBS$ of silorane resin to 5 adhesives: SS, 23.2 MPa; CSE, 19.4 MPa; AB3, 30.3 MPa; AB2 and AE, no bond. Additional layering of SSb: CSE + SSb, 26.2 MPa; AB2 + SSb, 33.9 MPa; AE + SSb, no bond. High value of ${\mu}TBS$ was related to cohesive failure. SS showed the lowest water sorption. AE showed the highest solubility. Conclusions: The hydrophobicity of adhesive increased, and silorane resin bond-strength was also increased. Additional hydrophobic adhesive layer did not increase the bond-strength to silorane resin except AB2 + SSb. All-Bond 3 showed similar ${\mu}TBS$ & water sorption with SS. By these facts, we could reach a conclusion that All-Bond 3 is a competitive adhesive which can replace the Silorane adhesive system.

• Korean Security Journal
• /
• no.28
• /
• pp.103-130
• /
• 2011

This study is the research of enterprise security for raising the profitability and stability of Korean companies in global business environment and strategic cooperation of business. As the scientific technology gets complicated as day goes by and new competitors appear regardless the border in the modern business environment, the situation happens frequently which the huge company hands over their market to the new one armed with the innovative thinking overnight. To survive such new environment, the answer is the change of paradigm regarding business management method at the new point of view. With the low level of security risk management of Korean companies which stick to old habit, the security management which helps the companies secure profits is not affordable. The global village where the population of 7 billions live in 21st century is facing up to the rapid ecological adaptation. The rapid change of climatic environment creates the hundreds of thousands of sufferers in a moment, and we have been watching the millions of livestock are buried alive due to new contagious disease everyday. Such change encourages the humans in global village to change the basic way of living. The business ecosystem which is the basic root for economic life cannot be an exception. To survive the business environment of 21st century, the security risk management at management level is required and the reporting line of companies should be established newly for raising business competing power through security risk management. The companies should bear in mind that they can be disappeared into our old memories overnight if they are not sensitive to the changing environment. Out of new risks for the modern companies, the field especially Korean companies are dealing easily is the security risk. Not like past, the security risk which's size is much more massive and its propagation velocity is very fast is the one of important business risks which the management should take care. Out of security risks which influence on the modern companies significantly, the brand of companies, protection of their reputation, continuity of production and operation and keeping customer's trust are prior to the others. This study offered the suggestion regarding enterprise security and the strategic cooperation of business to deal with such security risk effectively.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.609-615
• /
• 2014

The cytoprotective effect of Moringa oleifera Lam. (drumstick tree) on neuronal cells was investigated to confirm the physiological benefits associated with this natural food resource. First, the drumstick tree extract was chemically analyzed to determine inherent nutritional constituents. Calcium and potassium were identified as the major mineral constituents, and palmitic acid (C16:0, 16.33%) and gadoleic acid (C20:01, 66.34%) were detected as the major fatty acids. Moreover, drumstick tree extract contained 94.78 mg/100 g vitamin E and 112.61 mg/100 g niacin. PC12 cells were used to study the cytoprotective effects of drumstick tree extract. Intracellular accumulation of reactive oxygen species was significantly reduced when $H_2O_2$ treated-neuronal cells were cultured in a medium containing the methanolic extract of drumstick tree, compared to cells treated with only $H_2O_2$. Cell viability assay using MTT showed that the extract protected cells against $H_2O_2$-induced neurotoxicity and inhibited LDH leakage from the cell membrane. Caspase assay showed that the extract exerted cytoprotective effect against apoptosis. Consequently, these data suggest that drumstick tree is a useful natural resource with positive effects on human health.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2015

Purpose: Time of operation has been reduced and accuracy of operation has been improved since C-arm, which offer real-time image of patient, was introduced in operation room. However, because of the contamination of patient, C-arm could not be used more appropriately. Therefore, this study is to know factors of controlling exposure dose, image quality and the exposed dose of health professional in operation room. Materials and methods: Height of Wilson frame (bed for operation) was fixed at 130 cm. Then, Model 76-2 Phantom, which was set by assembling manual of Fluke Company, was set on the bed. Head/Spine Fluoroscopy AEC mode was set for exposure condition. According to detector size of C-arm, the absorbed dose per min was measured in the 7 steps OFD (cm) from 10 cm to 40 cm (10, 15, 20, 25, 30, 35, 40 cm). In each step of OFD, the absorbed dose per min of same diameter of collimation was measured. Moreover, using Nero MAX Model 8000, exposure dose per min was measured according to 3 step of distance from detector (20 cm, 60 cm, 100 cm). Finally, resolution was measured by CDRH Disc Phantom and magnification of each OFD was measured by aluminum stick bar. Result: According to detector size of C-arm, difference of absorbed dose shows that the dose of 20 cm OFD is 1.750 times higher than the dose of 40 cm OFD. It means that the C-arm, which has smaller size of detector, shows the bigger difference of absorbed dose per min (p<0.05). In the difference of absorbed dose in the same step of OFD (from 20 cm to 40 cm), the absorbed dose of 9 inch detect or C-arm was 1.370 times higher than 12 inch' s (p<0.05). When OFD was set to 20 cm OFD, the absorbed dose of non-collimation case was approximately 0.816 times lower than the absorbed dose of collimation cases (p<0.05). When the distance was 20 cm from detector, exposed does includes first-ray and scatter-ray. When the distance was 60 cm and 100 cm from detector, exposed does includes just scatter-ray. So, there was the 2.200 times difference of absorbed does. Finally, when OFD was increased, spatial resolution was 4 to 5 step was increased. However, low contrast resolution was not relative. Moreover, there was 1.363 times difference of magnification (p<0.05). Conclusion: When C-Arm is used, avoiding contamination of patient is more important factor than reducing exposed dose of health professional in operation room. Just controlling exposure time is just way to reduce the exposed does of workers. However, in the case, non-probability influence could be occurred. Therefore, this study proved that the exposed dose will be reduced if the factors such as using small detector size of C-arm, setting OFD from 20 cm to 25 cm and non-collimating. Moreover, dose management of C-arm in the non-interesting area will be considered additionally.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.2
• /
• pp.86-113
• /
• 2014

This study has researched the characteristics and elements of Chwibyeong (翠屛), a sort of trellis in the Joseon Dynasty through the old documents, and the original form of Chwibyeong at Juhapru (宙合樓) in Changdeuk Palace. The results were as follow. First, as the result of literatures analysis for Imwon-gyeongje-ji (林園經濟志) and Jeungbo-sallim-gyeongje (增補山林經濟), the plant screen was classified as kinds of support[frame] material, plants and methods of planting. It was found that the supports of Chwibyeong were made of bamboo or the material such as the Jinjangmok (眞長木: a stick of oak) and Giryu (杞柳: Salix purpurea var. japonica). The evergreen coniferous trees including Pinus densiflora, Taxus cuspidata and Thuja orientalis were mainly used for the plant material of Chwibyeong. The general planting method of Chwibyeong was to plant on the ground, but sometimes the container planting was also found on the artificial ground. Second, the term of 'Chwibyeong' in the literatures was used in only the screen made by evergreen trees, and the superordinate category term of it was indicated by 'byeong (屛)'. Therefore Chwibyeong was a compound word formed from 'chwi (翠)' which means the characteristics of evergreen and 'byeong' as tree screen which the support was made by bamboo. And Chwibyeong had semantic context which was combined with the literary symbolization to describe a landscape of green peak and Taoist ideology be inherent from 'twelve peaks of Musan[巫山十二峰]' in Sichuan sheng (四川省). Thirdly, the photograph of Chwibyeong at Juhapru taken by the 1880s, showed that Chwibyeong was made with coniferous trees and was almost 2 meters high. The Chwibyeong at Juhapru was removed during the Japanese colonial era, but a few yew trees(Taxus cuspidata) used for Chwibyeong are still remaining. And some Juniperus chinensis which the composition time is unclear, were cultivated while hung loose its branchs at the sides of Eosumun (魚水門). This Junipers were presumed to be planted by Japanese after Japanese annexation of Korea(1910), and it was judged that both of the roofs of Eosumun's side gates might have been transformed into Japanese style at the same time. Lastly, Chwibyeong at Juhapru was restored in 2008 but it was restored in wrong way from original form without precise research. Especially Chwibyeong was restored with Sasa boreralis which is damaged by frost, so it requires exertion that should revive the originals to plant original material as much as possible. And it needs the development of fabrication technique for Chwibyeong and the application to current landscape architecture.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.84-107
• /
• 2018

Cheommojik is a pile cloth, a type of textile whose surface is covered with short piles. The term chaedam was used during the late Joseon dynasty to refer to pile cloth rugs, while the terms yoongjeon, dantong and yangtanja were used in the early twentieth century. Various documents, newspaper articles and photographs confirm that pile cloth rugs were used by the general public as well as the royal family from the late Joseon dynasty onward, and that there were domestic manufacturers of such rugs at that time. This study investigated six pile cloth rugs that were produced after the late Joseon dynasty, five of which feature Persian knots made of cut pile, the other being made with the loop pile method. The cut pile rugs are rectangular in shape and measure between 72-98cm by 150-156cm; and they are decorated in the middle with patterns of butterfly, deer, and tiger or the ten longevity symbols, and along the edges with patterns composed of 卍 symbols. The ground warp of all six rugs are made from cotton yarn, while the ground weft is made of cotton yarn on three pieces, wool on one piece and cotton and viscose rayon. The ground weft yarn from four pieces are Z-twist yarn made with two or more S-twist cotton yarn. Four to six colors were used for the pile weft, all being natural colors except for red. Two or more S- or Z-twist yarn were twisted together in the opposite twist for the pile weft, with the thickness determining the number of threads used. Six or more weft threads were used to make the start and end points of the rug; and the ground warp ends were arranged by tying every four of them together. For the left and right edges, three or more threads were wrapped together into a round stick-like form, and the second and third inner ground warps from the edges were stitched on to the wrapped edge. For the loop pile, loops were made in the direction of the warp; the ground warp and the ground weft may have been made with cotton, the pile warp with wool yarn. An analysis of the components of three rugs was conducted to determine which types of animal hair were used for the pile weft. Despite some inconclusive results, it was revealed that goat hair and fat-tailed sheep hair were used, raising the possibility that various kinds of animal fur were used in the production of pile cloth rugs. The six rugs examined in this study are estimated to have been made between the late 1800s and the early 1900s. Although the manufacturer of the rugs cannot be confirmed, we concluded that the rugs were produced in Korea after referring to the documentation of the domestic production of pile cloth rugs during the aforementioned period and the form and placements of the patterns on the rugs.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.21-36
• /
• 2019

Dead fuel moisture content is a key variable in fire danger rating as it affects fire ignition and behavior. This study evaluates simple regression models estimating the moisture content of standardized 10-h fuel stick (10-h FMC) at three sites with different characteristics(urban and outside/inside the forest). Equilibrium moisture content (EMC) was used as an independent variable, and in-situ measured 10-h FMC was used as a dependent variable and validation data. 10-h FMC spatial distribution maps were created for dates with the most frequent fire occurrence during 2013-2018. Also, 10-h FMC values of the dates were analyzed to investigate under which 10-h FMC condition forest fire is likely to occur. As the results, fitted equations could explain considerable part of the variance in 10-h FMC (62~78%). Compared to the validation data, the models performed well with R2 ranged from 0.53 to 0.68, root mean squared error (RMSE) ranged from 2.52% to 3.43%, and bias ranged from -0.41% to 1.10%. When the 10-h FMC model fitted for one site was applied to the other sites, $R^2$ was maintained as the same while RMSE and bias increased up to 5.13% and 3.68%, respectively. The major deficiency of the 10-h FMC model was that it poorly caught the difference in the drying process after rainfall between 10-h FMC and EMC. From the analysis of 10-h FMC during the dates fire occurred, more than 70% of the fires occurred under a 10-h FMC condition of less than 10.5%. Overall, the present study suggested a simple model estimating 10-h FMC with acceptable performance. Applying the 10-h FMC model to the automatic mountain weather observation system was successfully tested to produce a national-scale 10-h FMC spatial distribution map. This data will be fundamental information for forest fire research, and will support the policy maker.