• 한국광학회지
• /
• 제11권2호
• /
• pp.85-90
• /
• 2000

CRT디스플레이의 화질 평가에는 위도, 콘트라스트, addressability, 시청거리 등의 다양한 물리적 특성치가 사용된다. 그러나, 최종적인 CRT디스플레이 화질의 비교·평가는 물리적 특성치가 아닌 실제 사용자가 느끼는 화질 즉, 주관적 인지 화질에 의해 이루어진다. 본 논문에서는 4종류 CRT모니터의 SQRI(SQuare Root Integral) 값과 다수의 피험자에 의한 주관적 화질 평가 점수와의 상관성이 비교되었다. 그리고, 이러한 SQRI법의 주관적 화질 평가 척도로서의 타당성을 바탕으로 모니터의 다양한 물리적 특성치가 주관적 화질에 미치는 영향이 검토되었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.147-154
• /
• 1999

This paper presents a procedure for the frequency-domain analysis of a non-proportionally damped structure subjected to stationary seismic loads and for the finding of proper damper locations through simple analysis procedure without iteration. The shear areas of the dampers are decided in proportion to the magnitude of the components of the primary mode shape vector and to the root mean square values of the story drifts, The root-mean-squear responses are obtained using a power spectral density function for the ground acceleration. the results are compared with those obtained from damper placement decided in sequency based on the maximum story drift. According to the results the reliability of the proposed method turns out to be satisfactory compared to the methods which required iteration.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.54-63
• /
• 1996

We propose a 3rd order blind equalizer that incorporates a new transform method using either square root operation ($\sqrt{x]$) or reciprocal operation (1/x) in order to transform symmetric distribution of PAM signals at the transmitter, to asymmetric one. At the receiver, either the square operation or the reciprocal operation is needed to recover the asymmetrically transformed signals to the original ones after eualization. The reslts of the computer simulation, using the new method are better than the existing transform method using natural logarithm operation by the maximum of 8 dB in MSE. In addition, as the skewness of the asymmetrically transformed distribution has small values, the performances are improved.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.185-190
• /
• 2001

Rotating disks are used in various machines such as floppy disks, hard disk, turbines and circular sawblades. The problems of vibrations of rotating disks are important in improving these machines. Many investigators have dealt with these problem. Specially, vibrations of a rotating flexible disk taking into account the effect of air is difficult problem in simulation. The governing equation of a rotating flexible disk coupled to the surrounding fluid is investigated by a simple mathematical model. And several important parameters concerned with the stability of a rotating flexible disk are defined. Coupling strength between air and rotating flexible disk is proportional to square of disk radius directly and square root of the all of bending rigidity, disk density and thickness inversely. Lift-to-damping coefficient has relation to the onset of disk flutter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.249-252
• /
• 2001

TCM(Trellis Coded Modulation) has soft decision scheme so that BM(Branch Metric) calculates the ED(Euclidean Distance) between the received signal and each code words in signal space. For computing the ED, square and square root computations increase the hardware complexity. Some simplified method is known for convolutional codes with QPSK(Quadrature Phase Shift Keying), PSK(Phase Shift Keying) modulation. But it is not acceptable for QAM (Quadrature Amplitude Modulation)-TCM scheme. In this paper, we suggest that two modified BM computation methods, which is applicable for QAM-TCM. By comparative study, we also assessed two proposed method in the case of hardware complexity and BER (Bit Error Rate) performance.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.269-275
• /
• 2008

This study was conducted to design an impedance sensor that can measure soil water content of soils. Partial least square regression (PLSR) was applied to soil impedance data preprocessed with a smoothing method. An optimal sub-spectrum size and wavelength range were determined by comparing the coefficient of determination ($R^2$) and root mean square error (RMSE) of the PLSR models obtained using soil impedance data. various PLS analysis. Based on the PLSR analysis, it would be concluded that the optimal spectrum measurement range was $32.0{\sim}50.0\;MHz$ with the optimal sub-spectrum size of about 18.5 MHz.

• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1314-1319
• /
• 2004

The rosen types of piezo-transformers were prepared and electrical properties were investigated in order to establish the optimum parameters in the process of polarization for ferroelectric materials. Polarization was readily originated with increasing the external energy such as an applied voltage, time, and temperature so that the planar coupling factor and voltage gain were saturated under the conditions of over 14$0^{\circ}C$, applied voltage and time of 4 kV/mm and 3 minutes respectively. The empirical equation for domain rotation probability, which was in proportion to square of an applied voltage and temperature and square root of time, as functions of the above parameters was defined.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.351-356
• /
• 2004

Selecting appropriate G values in flocculator operation is important to produce high quality filter effluent in water treatment plants. However, misunderstanding and misleading of G calculation for the case of having power sources more than one or many paddles with one power source in a flocculation basin sometimes have led to low performance in flocculation. Theoretical analysis confirmed that the total G value in one flocculation unit having power sources more than one or with many paddles is the root-square of the sum of square of individual G value. This analysis also can give a simple calculation method of G value for designers and operators in fields.

• 천문학회보
• /
• 제35권1호
• /
• pp.83.1-83.1
• /
• 2010

In the last meeting of KAS, we reported the first statistical study of Faraday rotation measure (RM) in the large-scale structure of the universe using the data of cosmological structure formation simulations. With a turbulence dynamo model for the intergalactic magnetic field (IGMF), we predicted that the root mean square of RM through filaments is \sim 1 rad/m^2. Future radio observatories such as the Square Kilometer Array (SKA) could detect this signal level. However, it is known that the typical foreground galactic RM is a few tens and less than ten rad/m^2 in the low and high galactic latitudes, respectively. So the RM in the large-scale structure could be detected only after the foreground galactic RM is removed. In this talk, we show how we remove the foreground galactic RM and what we obtain from the masked data, by using some noise models and masking techniques. Our results can be used to simulate future RM observations by SKA, and eventually to constrain the origin and evolution of the IGMF in the large-scale structure.

• Wind and Structures
• /
• 제31권5호
• /
• pp.419-430
• /
• 2020

Weibull distribution is a conspicuous distribution known for its accuracy and its usage for wind energy analysis. The two and three parameter Weibull distributions are adopted in this study to fit wind speed data. The daily mean wind speed data of Ennore, Tamil Nadu, India has been used to validate the procedure. The parameters are estimated using maximum likelihood method, least square method and moment method. Four statistical tests namely Root mean square error, R2 test, Kolmogorov-Smirnov test and Anderson-Darling test are employed to inspect the fitness of Weibull probability density functions. The value of shape factor, scale factor, wind speed and wind power are determined at a height of 100m using extrapolation of numerical equations. Also, the value of capacity factor is calculated mathematically. This study provides a way to evaluate feasible locations for wind energy assessment, which can be used at any windy site throughout the world.