• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.4
• /
• pp.257-262
• /
• 2015

In this paper, the split-ring DGS resonator is proposed and its equivalent circuit are analyzed to design the low pass filter. Compared with the conventional dumbell DGS cell, this structure has a flat fluctuation in low frequency range and a sharp slop at edge frequency. The out-band suppression of the SRR-DGS cell can be improved by placing the open stubs on the conductor line which operates as parallel capacitances. Making use of equivalent circuit analytical method, the characteristics of the improved SRR DGS cell are investigated and applied to design compact low pass filter, which has a low in-band loss, sharp slop and high suppression of more than 35dB within a wide out-band frequency range. The dependence of the transmission characteristic on the dimension of a split ring, such as side-length and split-gap, is analyzed in detail. In addition, an improved SRR DGS cell model with open stubs loaded on the conductor line is then presented to improve the out-band suppression. By using the equivalent-circuit analytical method, an S-band microstrip low-pass filter with perfect low-pass characteristic and high out-band suppression is designed and fabricated.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.2
• /
• pp.93-99
• /
• 2012

For speech coding, a vocal tract is modeled using Linear Predictive Coding (LPC) coefficients. The LPC coefficients are typically transformed to Line Spectral Frequency (LSF) parameters which are advantageous for linear interpolation and quantization. If multidimensional LSF data are quantized directly using Vector-Quantization (VQ), high rate-distortion performance can be obtained by fully utilizing intra-frame correlation. In practice, since this direct VQ system cannot be used due to high computational complexity and memory requirement, Split VQ (SVQ) is used where a multidimensional vector is split into multilple sub-vectors for quantization. The LSF parameters also have high inter-frame correlation, and thus Predictive SVQ (PSVQ) is utilized. PSVQ provides better rate-distortion performance than SVQ. In this paper, to implement the optimal predictors in PSVQ for voice storage devices, we propose Multi-Frame AR-model based SVQ (MF-AR-SVQ) that considers the inter-frame correlations with multiple previous frames. Compared with conventional PSVQ, the proposed MF-AR-SVQ provides 1 bit gain in terms of spectral distortion without significant increase in complexity and memory requirement.

• Journal of the Korean Society of Costume
• /
• v.58 no.1
• /
• pp.79-89
• /
• 2008

Jongga means a head family by only first son's line of each generation. It is our culture's root and identity. It also includes ritual for continuing filial duty. Ritual takes the main role on jongga culture to pay respects to Jongga's ancestors and roots. Therefore, ritual costume's importance can not be neglected. We will check a Po mainly for Jongga ritual costumes' types and designs to refind Jonggas identity and its meaning. In this research, areas are divided to Gyoungsang by Youngnam sect and Jeonla by Kiho sect. Geochang, Andong in Gyoungsang province and Haenam, Namwon, Youngkwang in Jeonla province where currently first sons of Jongga reside have been researched. The method is based on Books and visits on the places. Ritual costumes' types and designs are different between Gyoungsang and Jeonla. Firstly, now in Jongga, only a Dopo and a Durumagi are worn while the manner book shows a Danryoung, a Jikryoung, a Dopo and a Simu. Also costumes are variable on areas. Secondly, a Po is characterized by its sleeve and back-line's inside skirt. In a Po, Gyoungsang has a Duri sleeve and Jeonla has a Duri sleeve which has been changed from a Dunggun sleeve. While Gyoungsang has rectangle-shaped two pieces cloths and a split in a bottom, Jeonla has both a Mu with a split back and a complete split back in back-line's inside skirt. It seems that Youngnam sect's fundamentalism and Kiho sect's flexibility about culture of old political groups would have influenced on these patterns.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.365-369
• /
• 2010

In this paper, a novel notch resonator is proposed based on Rectangular Split Ring Resonator (RRSS) element. We represented the electrical characteristics for R-SRR elements coupled with microstrip line, and measured result is compared with electromagnetic simulation (HFSS) result. We also solved equivalent circuit for R-SRR element, and also discussed influences of change structural parameters of R-SRR. The size of R-SRR is the most important parameters for frequency tuning. Also we can make tunable resonator form the basic structure. This novel resonator can apply to design of tunable bandpass filter and voltage control oscillator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3450-3453
• /
• 2013

We implemented double-negative metamaterials using cross-polarized split-ring resonators in a microstripline. The split-ring resonators comprised quad ring structures and were connected with the microstripline in series. Four different structures, with the shorted rings in varying locations, were fabricated to demonstrate reconfigurable band-pass characteristics. The effective permittivities and permeabilities were extracted using the Ziolkowski method. Excellent agreement between the developed circuit model and the measurement was observed up to 10 GHz.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.224-233
• /
• 1996

An automatic mesh generation scheme with triangular finite elements on three-dimensional surfaces has been developed. The surface triangulation process is performed as follows. To begin, surfaces with key nodes are transformed to two-dimensional planes and the meshes with triangular elements are constructed in these planes. Finally, the constructed meshes are transformed back to the original 3D surfaces. For the mesh generation, an irregular mesh generation scheme is employed in which local mesh densities are assigned by the user along the boundaries of the analysis domain. For this purpose a looping algorithm combined with an advancing front technique using basic operators has been developed, in which the loops are recursively subdivided into subloops with the use of the best split lines and then the basic operators generate elements. Using the split lines, the original boundaries are split recursively until each loop contains a certain number of key nodes, and then using the basic operators such as type-1 and type-2, one or two triangular elements are generated at each operation. After the triangulation process has been completed for each meshing domain, the resulting meshes are finally improved by smoothing process. Sample meshes are presented to demonstrate the versatility of the algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1538-1543
• /
• 2013

In this paper, a novel split ring resonator is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator. Oscillator using proposed split ring resonator is designed, it has improved phase noise characteristics. At the fundamental frequency of 5.8GHz, 7.22dBm output power and -83.5 dBc@100kHz phase noise have been measured for oscillator with split ring resonator. The phase noise characteristics of oscillator is improved about 9.7dB compared to one using the general ${\lambda}/4$ microstrip resonator. Next, we designed voltage controlled oscillator using proposed split ring resonator with varactor diode. The VCO has 125MHz tuning range from 5.833GHz to 5.845GHz, and phase noise characteristic is -118~-115.5 dBc/Hz@100KHz. Due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.4 s.23
• /
• pp.1-6
• /
• 2006

In terms of the speed-up of the conventional line, the research for a improved turnout was carried out continually around world. A turnout is known that it is the most unstable equipment structurally in the rail system. So, the turnout is needed more stable structure. An accurate assembly of turnout affects traveling qualify of turnout area and running safety. Therefore, a turnout which is pre-assembled at a factory by using the split PC sleeper is transported to construction site recently in advanced countries. In this paper, the performance measurements which estimate the safety of the split PC sleepers which are adopted for the first time to improve performance of turnout are implemented indoors. The split PC sleeper is one of components of the improved turnout. The test is considered of the worst ballast condition under the maintenance work as like STT(Swithc Tie Tamper) or MTT(Multiple Tie Tamper). These experiments results indicate that structural safety for the expansion joint of the split PC sleepers.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.95-102
• /
• 2003

The buffering is a promising solution to resolve the contention problem in optical network. we study the packet loss probability and the dimensioning of optical buffer using a Fiber Delay Line for variable length packet. In this paper, we study the relation between the granularity and the loss of FDL buffer in Single-Stage FDL buffer and propose the Single-Bundle Multi-Stage FDL buffer. The Multi-Stage FDL buffer is too early yet to apply to the current backbone network, considering the current technology in view of costs. but we assume that the above restriction will be resolved in these days. The appropriate number of delay and pass line for a dimensioning is based on a amount of occupied time by packets. Once more another multi-stage FDL buffer is proposed, Split-Bundle multi-stage FDL buffer. The Split-Bundle ms-FDL buffer is more feasible for a FDL buffer structure, considering not only a size of switching matrix but also a bulk of switching element. its feasibility will be demonstrated from a loss probability.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.3E
• /
• pp.53-57
• /
• 1998

Spectral information at a speech coder should be quantized with sufficient accuracy to keep perceptually transparent output speech. Spectral information at a low bit rate speech coder is usually transformed into corresponding line spectrum pair parameters and is often quantized with a vector quantization algorithm. As the vector quantization algorithm generally has high complexity in the optimal code vector searching routine, the complexity reduction in that routine is investigated using the ordering property of the line spectrum pair. When the proposed complexity reduction algorithm is applied to the well-known split vector quantization algorithm, the 46% complexity reduction is achieved in the distortion measure compu-tation.