• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.455-458
• /
• 1994

This paper deals with the analysis of a DC servo motel speed control system with PI-controller using the SPICE, which was developed as n simulation program for electronic circuits. The system including PI-controller is needed to be modelled for SPICE analysis. The system is divided to motor part, power conversion part, and control part for effective simulations. The overall system is reconstructed by using the above models and the steady-state and transient state are analyzed through SPICE simulations. The simulation results are verified by comparing with the results obtained by conventional simulations.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.5
• /
• pp.411-420
• /
• 1991

In this paper, SPICE program which is widely used in analysis of general circuit on electronic and electrical field has been applied to DC-DC converter. We have selected Forward type which is widely used us SMPS(Switched Mode Power Supply) of various electronic equipments, and have confirmed the waveforms of circuit operation, transfer of energy and resetting in transformer. And the procedure which the output voltage of converter, including the control circuit, has been stabilized from the transient state to the steady state by controlling the duty ratio of switch is presented. We have compared SPICE simulation with experiment and have verified the validity of SPICE simulation.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2020

Threshold voltage shift occurring during operation is implemented in a SPICE simulation tool. Among the shift models the stretched-exponential function model, which is frequently observed from both single-crystal silicon and thin-film transistors regardless of the nature of causes, is selected, adapted to transient simulation, and added to BSIM4 developed by BSIM Research Group at the University of California, Berkeley. The adaptation method used in this research is to select degradation and recovery models based on the comparison between the gate and threshold voltages. The threshold voltage shift is extracted from SPICE transient simulation and shows the stretched-exponential time dependence for both degradation and recovery situations. The implementation method developed in this research is not limited to the stretched-exponential function model and BSIM model. The proposed method enables to perform transient simulation with threshold voltage shift in situ and will help to verify the reliability of a circuit.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.4
• /
• pp.607-612
• /
• 1994

The static and dynamic model of IGBT for the SPICE simulation has been successfully developed. The various circuit model parameters are extracted from the I-V and C-V characteristics of IGBT and implemented into our model. The static model of IGBT consists of the MOSFET, bipolar transistor and series resistance. The parameters to be extracted are the threshold voltage of MOSFET, current gain $\beta$ of bipolar transistor, and the series resistance. They can be extracted from the measured I-V characteristics curve. The C-V characteristics between the terminals are very important parameters to determine the turn-on and turn-off waveform. Especially, voltage dependent capacitance are polynomially approximated to obtain the exact turn-on and turn-off waveforms. The SPICE simulation results employing new model agree well with the experimental values.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.794-803
• /
• 1987

In this paper, the SPICE 2.G6 JFET subroutine and other related subroutines are modified for circuit simulation of GaAs MESFET IC's. The hyperbolic tangent model is used for the drain current-voltage characteristics of GaAs MESFET's and derived channel-conductance and drain-conductance model from the above current model are implemented into small-signal model of GaAs MESFET's. And, device capacitance model which consider after-pinch-off state are modified, and device charge model for SPICE 2G.6 are proposed. The result of modification is shown to be suitable for GaAs circuit simulator, showing good agreement with experimetal results. Forthermore the DC convergence of this paper is better than that of SPICE 2.G JFET subroutine. GaAs MESFET model in this paper is applied for both depletion mode GaAs MESFET and enhancement-mode GaAs MESFET without difficulty.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1182-1187
• /
• 2013

Transient radiation is emitted during a nuclear explosion and causes fatal errors as upset and latch-up in CMOS circuits. This paper proposes the transient radiation SPICE models of NMOS, PMOS, and INVERTER based on the transient radiation analysis using TCAD (Technology Computer Aided Design). To make the SPICE model of a CMOS circuit, the photocurrent in the PN junction of NMOS and PMOS was replaced as current source, and a latch-up phenomenon in the inverter was applied using a parasitic thyristor. As an example, the proposed transient radiation SPICE model was applied to a CMOS NAND circuit. The CMOS NAND circuit was simulated by SPICE and TCAD using the 0.18um CMOS process model parameter. The simulated results show that the SPICE results were similar to the TCAD simulation and the test results of commercial CMOS NAND IC. The simulation time was reduced by 120 times compared to the TCAD simulation.

• Herbal Formula Science
• /
• v.18 no.2
• /
• pp.15-23
• /
• 2010

The spice phenomenon therapy is to adhibit aromatic herbs or materials to the human body or clothing, for the purpose of preventing and treating diseases. Mankind found the fire, and found that some plants and trees give off smoke when they are burning. Then, they found that some of aromatic substances had certain actions after being absorbed through the respiratory organ, which was the beginning of the spice phenomenon therapy. The spice phenomenon therapy is effective to relieve the exterior syndrome, to eliminate dampness, to regulate Qi flow, and to induce resuscitation. It has two actions. One is that the aromas that permeated the body, refreshes the mind, stimulates the appetite, strengthens the spleen and the stomach, and makes a relaxing sleep. The other is that the aromatic substances, absorbed into the human body, have pharmacological actions. The volatile aromatic substances have various pharmacological actions such as stimulating cranial nerves, dilating cardiac blood vessels, promoting gastric secretion, relaxing and sleep-inducing. It has been proved that the spice phenomenon therapy is anti-inflammatory and anti-microbial and is effective to dilate cerebral blood vessels and to ease the pain. It is expected to be studied more aggressively.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.72-80
• /
• 2001

In this paper, we present a systematic method of extracting the input parameters of poly-Si TFT(Thin-Film Transistor) for Spice simulations. This method has been applied to two different types of poly-Si TFTs such as ELA (Excimer Laser Annealing) and SMC (Silicide Mediated Crystallization) with good fitting results to experimental data. Among the Spice circuit simulators, the PSpice has the GUI(graphic user interface) feature making the composition of complicated circuits easier. We added successfully the poly-Si TFT model of AIM-Spice to the PSpice simulator, and analyzed easily to compare the electrical characteristics of pixels without or with the line RC delay. In the comparative results, the ELA poly-Si TFT is superior to the SMC poly-Si TFT in the charging time and the kickback voltage for the TFT-LCD (Thin Film Transistor-Liquid Crystal Display).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.200-201
• /
• 2017

This paper introduces the SPICE simulation results of 3D sequential inverter considering electrical coupling. TCAD data and the SPICE data are compared to verify that the electrical coupling is well considered by using BSIM-IMG for the upper NMOS and LETI-UTSOI model for the lower PMOS. When inter layer dielectric is small, it is confirmed that electrical coupling is well reflected in the top transistor $I_{ds}-V_{gs}$ characteristics according to the change of the bottom transistor gate voltage.

• Journal of Sensor Science and Technology
• /
• v.24 no.5
• /
• pp.353-357
• /
• 2015

A new SPICE-compatible model for a gate/body-tied PMOSFET photodetector (GBT PD) with an overlapping control gate is presented. The proposed SPICE-compatible model of a GBT PD with an overlapping control gate makes it possible to control the photocurrent. Research into GBT PD modeling was proposed previously. However, the analysis and simulation of GBT PDs is not lacking. This SPICE model concurs with the measurement results, and it is simpler than previous models. The general GBT PD model is a hybrid device composed of a MOSFET, a lateral bipolar junction transistor (BJT), and a vertical BJT. Conventional SPICE models are based on complete depletion approximation, which is more applicable to reverse-biased p-n junctions; therefore, they are not appropriate for simulating circuits that are implemented with a GBT PD with an overlapping control gate. The GBT PD with an overlapping control gate can control the sensitivity of the photodetector. The proposed sensor is fabricated using a $0.35{\mu}m$ two-poly, four-metal standard complementary MOS (CMOS) process, and its characteristics are evaluated.