• 제목/요약/키워드: spice

검색결과 742건 처리시간 0.032초

SPICE를 이용한 직류서보전동기 속도제어시스템의 해석 (SPICE Based Analysis of a DC Servo Motor Speed Control System)

  • 민인규;유상규;장성수;박영진;홍순찬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 A
    • /
    • pp.455-458
    • /
    • 1994
  • This paper deals with the analysis of a DC servo motel speed control system with PI-controller using the SPICE, which was developed as n simulation program for electronic circuits. The system including PI-controller is needed to be modelled for SPICE analysis. The system is divided to motor part, power conversion part, and control part for effective simulations. The overall system is reconstructed by using the above models and the steady-state and transient state are analyzed through SPICE simulations. The simulation results are verified by comparing with the results obtained by conventional simulations.

  • PDF

SPICE를 이용한 Forward DC-DC 콘버어터 해석 (An Analysis of Forward DC-DC Converter Using SPICE Program)

  • 김희준;안태영;이영선
    • 전자공학회논문지B
    • /
    • 제28B권5호
    • /
    • pp.411-420
    • /
    • 1991
  • In this paper, SPICE program which is widely used in analysis of general circuit on electronic and electrical field has been applied to DC-DC converter. We have selected Forward type which is widely used us SMPS(Switched Mode Power Supply) of various electronic equipments, and have confirmed the waveforms of circuit operation, transfer of energy and resetting in transformer. And the procedure which the output voltage of converter, including the control circuit, has been stabilized from the transient state to the steady state by controlling the duty ratio of switch is presented. We have compared SPICE simulation with experiment and have verified the validity of SPICE simulation.

  • PDF

Stretched-Exponential 형태의 문턱전압 이동 모델의 SPICE구현 (Implementation of Stretched-Exponential Time Dependence of Threshold Voltage Shift in SPICE)

  • 정태호
    • 반도체디스플레이기술학회지
    • /
    • 제19권1호
    • /
    • pp.61-66
    • /
    • 2020
  • Threshold voltage shift occurring during operation is implemented in a SPICE simulation tool. Among the shift models the stretched-exponential function model, which is frequently observed from both single-crystal silicon and thin-film transistors regardless of the nature of causes, is selected, adapted to transient simulation, and added to BSIM4 developed by BSIM Research Group at the University of California, Berkeley. The adaptation method used in this research is to select degradation and recovery models based on the comparison between the gate and threshold voltages. The threshold voltage shift is extracted from SPICE transient simulation and shows the stretched-exponential time dependence for both degradation and recovery situations. The implementation method developed in this research is not limited to the stretched-exponential function model and BSIM model. The proposed method enables to perform transient simulation with threshold voltage shift in situ and will help to verify the reliability of a circuit.

IGBT의 SPICE 파라미터 추출 (SPICE Parameter Extraction for the IGBT)

  • 김한수;조영호;최성동;최연익;한민구
    • 대한전기학회논문지
    • /
    • 제43권4호
    • /
    • pp.607-612
    • /
    • 1994
  • The static and dynamic model of IGBT for the SPICE simulation has been successfully developed. The various circuit model parameters are extracted from the I-V and C-V characteristics of IGBT and implemented into our model. The static model of IGBT consists of the MOSFET, bipolar transistor and series resistance. The parameters to be extracted are the threshold voltage of MOSFET, current gain $\beta$ of bipolar transistor, and the series resistance. They can be extracted from the measured I-V characteristics curve. The C-V characteristics between the terminals are very important parameters to determine the turn-on and turn-off waveform. Especially, voltage dependent capacitance are polynomially approximated to obtain the exact turn-on and turn-off waveforms. The SPICE simulation results employing new model agree well with the experimental values.

  • PDF

GaAs D-Mode와 E-Mode MESFET 모델의 SPICE 삽입 (SPICE Implementation of GaAs D-Mode and E-Mode MESFET Model)

  • 손상희;곽계달
    • 대한전자공학회논문지
    • /
    • 제24권5호
    • /
    • pp.794-803
    • /
    • 1987
  • In this paper, the SPICE 2.G6 JFET subroutine and other related subroutines are modified for circuit simulation of GaAs MESFET IC's. The hyperbolic tangent model is used for the drain current-voltage characteristics of GaAs MESFET's and derived channel-conductance and drain-conductance model from the above current model are implemented into small-signal model of GaAs MESFET's. And, device capacitance model which consider after-pinch-off state are modified, and device charge model for SPICE 2G.6 are proposed. The result of modification is shown to be suitable for GaAs circuit simulator, showing good agreement with experimetal results. Forthermore the DC convergence of this paper is better than that of SPICE 2.G JFET subroutine. GaAs MESFET model in this paper is applied for both depletion mode GaAs MESFET and enhancement-mode GaAs MESFET without difficulty.

  • PDF

New Approach for Transient Radiation SPICE Model of CMOS Circuit

  • Jeong, Sang-Hun;Lee, Nam-Ho;Lee, Jong-Yeol;Cho, Seong-Ik
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권5호
    • /
    • pp.1182-1187
    • /
    • 2013
  • Transient radiation is emitted during a nuclear explosion and causes fatal errors as upset and latch-up in CMOS circuits. This paper proposes the transient radiation SPICE models of NMOS, PMOS, and INVERTER based on the transient radiation analysis using TCAD (Technology Computer Aided Design). To make the SPICE model of a CMOS circuit, the photocurrent in the PN junction of NMOS and PMOS was replaced as current source, and a latch-up phenomenon in the inverter was applied using a parasitic thyristor. As an example, the proposed transient radiation SPICE model was applied to a CMOS NAND circuit. The CMOS NAND circuit was simulated by SPICE and TCAD using the 0.18um CMOS process model parameter. The simulated results show that the SPICE results were similar to the TCAD simulation and the test results of commercial CMOS NAND IC. The simulation time was reduced by 120 times compared to the TCAD simulation.

향신(香身)요법에 관한 문헌 고찰 (A review of Spice Phenomenon Therapy)

  • 이승호;박필상;권동렬
    • 대한한의학방제학회지
    • /
    • 제18권2호
    • /
    • pp.15-23
    • /
    • 2010
  • The spice phenomenon therapy is to adhibit aromatic herbs or materials to the human body or clothing, for the purpose of preventing and treating diseases. Mankind found the fire, and found that some plants and trees give off smoke when they are burning. Then, they found that some of aromatic substances had certain actions after being absorbed through the respiratory organ, which was the beginning of the spice phenomenon therapy. The spice phenomenon therapy is effective to relieve the exterior syndrome, to eliminate dampness, to regulate Qi flow, and to induce resuscitation. It has two actions. One is that the aromas that permeated the body, refreshes the mind, stimulates the appetite, strengthens the spleen and the stomach, and makes a relaxing sleep. The other is that the aromatic substances, absorbed into the human body, have pharmacological actions. The volatile aromatic substances have various pharmacological actions such as stimulating cranial nerves, dilating cardiac blood vessels, promoting gastric secretion, relaxing and sleep-inducing. It has been proved that the spice phenomenon therapy is anti-inflammatory and anti-microbial and is effective to dilate cerebral blood vessels and to ease the pain. It is expected to be studied more aggressively.

대화면/고화질 TFT-LCD 개발을 위하여 ELA 및 SMC로 제작된 다결정 실리콘 박막 트랜지스터의 화소 특성 비교 (Comparative Pixel Characteristics of ELA and SMC poly-Si TETs for the Development of Wide-Area/High-Quality TFT-LCD)

    • 한국진공학회지
    • /
    • 제10권1호
    • /
    • pp.72-80
    • /
    • 2001
  • 본 논문에서는 ELA(excimer laser annealing) 및 SMC(silicide mediated crystallization) 공정으로 제작된 다결정 실리콘 TFT-LCD(Thin Film Transistor-Liquid Crystal Display) 화소의 전기적 특성을 Spice회로 시뮬레이션을 통해 비교 분석하였다. 복잡한 TFT-LCD 어레이 (array) 회로의 전기적 특성 분석을 위하여 GUI(Graphic User Interface) 방식으로 손쉽게 복잡한 회로를 구성할 수 있는 PSpice에 AIM-Spice의 다결정 실리콘 박막 트랜지스터 소자 모델을 이식하고, AIM-Spice의 변수 추출법을 개선 체계화하였으며 ELA 및 SMC공정으로 각기 제작된 다결정 실리콘 박막트랜지스터에 적용하여 단위 화소 및 라인 RC 지연을 고려한 화소 특성을 비교 분석하였다. 비교 결과 ELA 다결정 실리콘 박막 트랜지스터 소자가 SMC에 비해 TFT-LCD의 화소 충전 시간 및 킥백(kickback) 전압 특성이 모두 우수하게 나타남을 확인하였다.

  • PDF

전기적 상호작용을 고려한 3차원 순차적 인버터의 SPICE 시뮬레이션 (SPICE Simulation of 3D Sequential Inverter Considering Electrical Coupling)

  • 안태준;유윤섭
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.200-201
    • /
    • 2017
  • 이 논문은 3D 순차적 CMOS 인버터 회로의 전기적 상호작용을 고려한 시뮬레이션을 제시하고자 한다. 상층 NMOS는 BSIM-IMG, 하층 PMOS에는 LETI-UTSOI 모델을 사용하여 전기적 상호작용이 잘 반영되는지 TCAD 데이터와 SPICE 데이터를 비교하였다. 트랜지스터 간의 높이가 작을 때 하층 게이트의 전압의 변화에 따라 상층 전류-전압 특성에 전기적 상호작용이 잘 반영되는 것을 확인하였다.

  • PDF

A SPICE-Compatible Model for a Gate/Body-Tied PMOSFET Photodetector With an Overlapping Control Gate

  • Jo, Sung-Hyun;Bae, Myunghan;Choi, Byoung-Soo;Choi, Pyung;Shin, Jang-Kyoo
    • 센서학회지
    • /
    • 제24권5호
    • /
    • pp.353-357
    • /
    • 2015
  • A new SPICE-compatible model for a gate/body-tied PMOSFET photodetector (GBT PD) with an overlapping control gate is presented. The proposed SPICE-compatible model of a GBT PD with an overlapping control gate makes it possible to control the photocurrent. Research into GBT PD modeling was proposed previously. However, the analysis and simulation of GBT PDs is not lacking. This SPICE model concurs with the measurement results, and it is simpler than previous models. The general GBT PD model is a hybrid device composed of a MOSFET, a lateral bipolar junction transistor (BJT), and a vertical BJT. Conventional SPICE models are based on complete depletion approximation, which is more applicable to reverse-biased p-n junctions; therefore, they are not appropriate for simulating circuits that are implemented with a GBT PD with an overlapping control gate. The GBT PD with an overlapping control gate can control the sensitivity of the photodetector. The proposed sensor is fabricated using a $0.35{\mu}m$ two-poly, four-metal standard complementary MOS (CMOS) process, and its characteristics are evaluated.