• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.274-278
• /
• 2012

$TiO_2$ can be used optically and is applied on many areas such as gas sensor, solar cell and photocatalysis. Electrospun nanofibers have received great interest for development and utilization in some novel applications, such as chemical sensors, dye-sensitized solar cell and photo catalysis. In this study, pure $TiO_2$ and Ga-doped $TiO_2$ nanofibers synthesized by a modified electrospinning method. The Ga doped $TiO_2$ solution is prepared by mixing poly vinyl pyrrolidone, ethyl alcohol, and titanium (IV) isopropoxide. By electrospinning these sols, nanofibers were fabricated. These fibers are heat-treated at $800^{\circ}C$ in air. The prepared pure $TiO_2$ and Ga-doped $TiO_2$ nanofibers samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.871-879
• /
• 2007

Purpose: The purpose of this study was to evaluate the bone regeneration of novel biodegradable amorphous calcium phosphate. Materials and Method: An 8-mm, calvarial, critical-size osteotomy defect was created in each of 20 male Sprague-Dawley rats(weight $250{\sim}300g$). The animals were divided into two groups of 10 animals each and allowed to heal for 2 weeks(10 rats). The first group was the control group and the other group was the experimental group which received the novel biodegradable calcium phosphate. Results: The healing of the calvarium in the control group was uneventful. The histologic results showed little bone formation in the control group. The experimental group which received the novel biodegradable calcium phosphate showed a normal wound healing. There were a lot of new bone formation around the biomaterial in 2 weeks. The bone formation increased in 8 weeks when compared to 2 weeks and there was a significant bone increase as well(P<0.01). The nobel biodegradable calcium phosphate showed statistical significance when compared to the control group (P<0.05). The novel biodegradable calcium phosphate in 8 weeks showed a significant increase in bone formation when compared to 2 weeks $(40.4{\pm}1.6)$(%). The biodegradable calcium phosphate which is made from mixing calcium phosphate glass(CPG), NaCO and NaOH solution, is biocompatible, osteoconductive and has a high potency of bone formation. Conclusion: We can conclude that the novel biodegradable calcium phosphate can be used as an efficient bone graft material for its biodegradability and osteoconductivity.

• Korean Journal of Plant Resources
• /
• v.24 no.4
• /
• pp.445-455
• /
• 2011

This study was performed to develop a natural preservative which had the most successful effect on prolonging the vase life of cut flowers Rosa hybrida 'Enjoy'. To determine the effect of sucrose on vase life of cut roses, R. hybrida 'Enjoy', 0, 1, 3 or 5% of sucrose was mixed with Hypnum jutlandicum extract. The result showed that in the case of adding sucrose to extracts from H. jutlandicum, vase life of cut flowers was shortened, along with the cut flowers losing chlorophyll, becoming decolorized and finally showing wilting phenomenon. However, using hydroxy quinoline sulfate (HQS) and extracts from H. jutlandicum together exhibited an improved effect of prolonging vase life, especially when adding 100 $mg{\cdot}L^{-1}$ HQS, which had the effect of prolonging the vase life of R. hybrida 'Enjoy' the most. Regarding pH of extracts, 2 $mg{\cdot}L^{-1}$ of extracts from H. jutlandicum show originally pH 3.8. This was compared with adjusted extract solutions as pH 3.0, 4.0 or 5.0. The results showed that the solution of pH 3.8 had the most successful effect on prolonging the vase life of R. hybrida 'Enjoy'. Given all the results, H. jutlandicum extract (2 $mg{\cdot}L^{-1}$) and HQS (100 $mg{\cdot}L^{-1}$) was the most effective in prolonging the vase life of cut R. hybrida 'Enjoy'. Moss is expected to be worth developing as a natural preservative since it is easy to get and causes no damage to the environment.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.47-54
• /
• 2017

Cement industry is typical carbon-emission industry. If the industrial by-products(granulated blast-furnace slag (GGBFS), fly ash, etc.) are used a large amount, it might be able to reduce cement consumption and mitigate carbon emissions. In this case, however, decrease of early strength is relatively large. Therefore, there is a limitation in increase of the amount of substitute. Considering these circumstances, it would be a good solution to reduce carbon emissions in cement industry to improve the performances of mixed cement through proper alkali-activation in Portland blended cement using GGBFS or fly ash. Therefore, this study prepared concrete in ready-mixed concrete manufacturing facilities with an addition of a binder which used 2.0% modified alkali sulfate activator after mixing Portland cement, GGBFS and fly ash in the ratio of 4:4:2 and assessed its basic properties. The results found the followings: The use of modified alkali-sulfate activator slightly reduced slump and shortened setting time. As a result, bleeding capacity decreased while early strength improved. In addition, there is no big difference in carbonation resistance. It appears that there should be continued experiments and analyses on the related long-term aged specimens.

• Resources Recycling
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2010

The spheric sintered body with $6{\pm}2mm$ diameter was manufactured in a rotary kiln at $1125^{\circ}C$/15 min using green body formed by pelletizing the batch powder composing of coal bottom ash produced from power plant and dredged soil by 70:30, wt%. And the physical properties of sintered body (BD) were analyzed to confirm the possibility for applying to an absorbent to restore a contaminated soil. The sintered body had a giant pore above 100 ${\mu}m$ and a fine pore below 10 ${\mu}m$, and bulk density was 1.4. Also its specific surface area, porosity and void proportion were $12.0m^2/g$, 30.1% and 38.2% respectively. The crushed body (BD-C), produced by crushing a BD specimen into an irregular shape with a aspect ratio of about 2, was similar to BD specimen at bulk density and pore size distribution. But it had superior values of specific surface area, porosity and void proportion compared with BD specimen owing to a decreased apparent volume due to conversion of closed pore existed at interior of BD to open pore during a crushing process. The IEP of sintered body occurred at about pH=5, so the optimum pH condition of reacting aqueous solution could be known before bonding a microbe to the sintered body. Hence, the optimum void proportion and porosity of an absorbent can be obtained by appropriate mixing a BD with BD-C from the base data calculated in this study.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.63-71
• /
• 2011

A large volume of uranium electrokinetic leachate has been generated during the electrokinetic decontamination to remove uranium from contaminated soil. The treatment technology for the reuse of the uranium leachate was developed. The concentration of uranium in the generated uranium leachate was 180 ppm and concentrations of Mg(II), K(I), Fe(II), and Al(III) ions ranged from 20 ppm to 1,210 ppm. The treatment process for uranium leachate consisted mainly of mixing and cohesion, precipitation, concentration, and filtration. In order to obtain the pH=11 of a precipitate solution, the calcium hydroxide needs to be 3.0g/100ml and the sodium hydroxide needed to be 2.7g/100ml. The results of several precipitation experiments showed that a mixture of NaOH+0.2g alum+0.15g magnetite was an optimal precipitant for filtration. The average particle size of precipitate with NaOH+alum+0.15g magnetite was $600\;{\mu}m$. Because the total value of metal concentrations in supernatant at pH=9 was the smallest, sodium hydroxide should be added with 0.2g alum and 0.15g magnetite for pH=9 of leachate.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.412-418
• /
• 2020

This paper produced an automatic fluid management system that can accurately control the specific gravity of etching solution(FeCl₃), and produced a SUS MASK applied to OLED. The target was set at 0.4 mm in diameter of the hole. As a result of this misconception, the etching speed increased when the specific gravity(S.G) value of FeCl₃ was changed from 1.43 to 1.49. And when the weight was 1.49, it was found that the vertical diameter was 0.405 mm, approaching the target. When pressure injection was varied from 2.0kg/cm2 to 3.5kg/cm2, the hole diameter at 3.0 kg/cm2 averaged 0.4mm, matching the target. The characteristics of the change in gravity were analyzed by applying the additive 1.2% and setting the weight at 1.430 by mixing HCl and H2O in FeCl₃ and fixing the injection pressure at 3.0 kg/cm2. When the weight changed from 1.460 to 1.469 the etching speed increased from 0.564 to 0.540. When the weight was 1.467, the hole diameter was measured at 0.4 mm and the target was reached.

• Korean Journal of Poultry Science
• /
• v.42 no.3
• /
• pp.267-274
• /
• 2015

Peat moss has been found to be useful as a plant growth substance, fertilizer, and soil solution. It is not known, however, whether dietary peat moss affects performance in broilers. In the present study, we investigated the effects of dietary peat moss as a feed ingredient in broilers. Experimental diets were prepared by mixing basal feed with PM at 0.0, 0.2, 0.4, 0.8, and 1.6%. In experiment 1, 150 14-day-old Ross broiler chicks were housed for 2 weeks in 15 pens that were randomly assigned into five groups (0.0%, 0.2%, 0.4%, 0.8% and 1.6% PM). Dietary peat moss at 0.2% and 0.4% significantly increased the water intake, body weight, weight gain and feed efficiency compared with the control (0.0% PM, P<0.05) but did not affect feed intake. Higher levels of PM (0.8 and 1.6%) significantly decreased feed intake, body weight and weight gain. In experiment 2, 198 7-day-old Ross chicks were housed for 3 weeks in nine pens that were randomly assigned into three groups (0.0%, 0.2% and 0.4% PM). When the broilers were fed with dietary peat moss for 3 weeks, the peat moss effects disappeared. The results of the current study show that low amounts of dietary peat moss may exert beneficial effects on performance in broilers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.5
• /
• pp.272-279
• /
• 2003

This study was performed to develop a more rapid and simple nutrient diagnosis method of plants than the conventional leaf analysis method. Cucumber (Cucumis sativus L. cv. jangil banbaek) was planted in the mixed media produced by mixing perlite and rock wool at 1:1 (v/v) ratio. The Yamazakki nutrient solution for cucumber was supplied to the media using micro-drip irrigation system. Experimental plots were consisted of no fertilization, deficient fertilization, adequate fertilization, and surplus fertilization for N, P and K. Specific color difference sensor value (SCDSV) measured by chlorophyll meter was closely related to total-N concentration in leaves measured by the conventional method. Nitrate, $PO_4$ and K concentration in petiole sap measured by test strips showed a significant relationship with total-N, P and K concentration in leaves. Linear regression equations between $NO_3$, $PO_4$ and K concentration in petiole sap and total-N, P and K concentration in the leaves were prepared. Optimum levels of $NO_{3}$, $PO_{4}$ and K in petiole sap were obtained by plugging the optimum concentrations of total-N, P and K in the leaves by other researchers into the equations. In conclusion, the SCDSV measured by chlorophyll meter and the concentration of $NO_3$, P and K in petiole sap measured by the test strips would be suitable for rapid estimation of plant nutrient status.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.400-406
• /
• 2002

In case of doenjang, solution of browning problem might be an important remedy in order to dissolve consumers' dissatisfaction, therefore this study was performed to develop traditional doenjang which has improved in color aspect for consumers' needs. Physicochemical compositions and color values of commercialized traditional doenjang which was processed by history references of our country, were analyzed. doenjang used as samples were processed with traditional meju, which were made with soybean and mixed with various rates after following process such as soaking, steaming, cooling, chopping and grinding. The doenjang processed were storaged at $30^{\circ}C$ for 27 days, and their amino-N, pH, color values and sensory evaluation were analyzed with fermentation period. Furthermore, nitrogen results analyzed were compared with that of commercialized traditional doenjang. In the comparison with control, treated with only traditional meju, and doenjang treatments processed with different mixing rates of traditional meju and steamed soybean, the content of amino-N in control were higher than the others, and the contents of amino-N decreased with increasing contents of steamed soybean. Their pH were changed weak alkalic region into weak acidic region with fermentation period. In the aspect of color, traditional doenjang having the rate of traditional meju and steamed soybean (1:4) was most improved and also, in comparison of result of sensory evaluation with commercial traditional doenjang, its color, taste and falvor were evaluated predominent, therefore it might be thought to have competition on the market.