• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.2056-2060
• /
• 2007

A successful combination of “oxygen-assisted chemical vapor deposition (CVD) process” and Co catalyst nanoparticles to grow highly pure single walled carbon nanotubes (SWNTs) was demonstrated. Recently, it was reported that addition of small amounts of oxygen during CVD process dramatically increased the purity and yield of carbon nanotubes. However, this strategy could not be applied for discrete Fe nanoparticle catalysts from which appropriate yields of SWNTs could be grown directly on solid substrates, and fabricated into field effect transistors (FETs) quite efficiently. The main reason for this failure is due to the carbothermal reduction which results in SiO2 nanotrench formation. We found that the oxygen-assisted CVD process could be successfully applied for the growth of highly pure SWNTs by switching the catalyst from Fe to Co nanoparticles. The topological morphologies and p-type transistor electrical transport properties of the grown SWNTs were examined by using atomic force microscope (AFM), Raman, and from FET devices fabricated by photolithography.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.85-85
• /
• 2010

Graphene, the building block of graphite, is one of the most promising materials due to their fascinating electronic transport properties. The pseudo-two-dimensional sp2 bonding in graphene layers yields one of the most effective solid lubricants. In this poster, we present the correlation between electrical and nanomechanical properties of graphene layer grown on Cu/Ni substrate with CVD (Chemical Vapor Deposition) method. The electrical (current and conductance) and nanomechanical (adhesion and friction) properties have been investigated by the combined apparatus of friction force microscopy/conductive probe atomic force microscopy (AFM). The experiment was carried out in a RHK AFM operating in ultrahigh vacuum using cantilevers with a conductive TiN coating. The current was measured as a function of the applied load between the AFM tip and the graphene layer. The contact area has been obtained with the continuum mechanical models. We will discuss the influence of mechanical deformation on the electrical transport mechanism on graphene layers.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.1
• /
• pp.61-70
• /
• 2012

Feasibility of co-digestion was investigated by a series of anaerobic batch experiments using sewage sludge, swine waste, and food waste leachate as substrates. The organic solid wastes were collected from M city, where the daily productions of sewage sludge, swine waste, and food waste leachate were 178 ton/d, 150 ton/d, and 8 ton/d, respectively. Both swine waste and food waste leachate showed superior methane yields, methane productivities, and organic pollutant removal efficiencies compared to sewage sludge. Co-digestion of the total amounts of organic solid wastes would enhance methane production by 5.60 times $(530\;m^{3}\;CH_{4}/d\;{\rightarrow}\;2,968\;m^{3}\;CH_{4}/d)$. However, it also increase the amount of digestate by 1.88 times with 3.79 to 4.92 times higher pollutants (chemical oxygen demands total nitrogen, and total phosphorus) loading rates. Co-digestion of organic solid wastes is a valid strategy to enhance the performance of an anaerobic sludge digester and the energy independence of a wastewater treatment plant. Anyhow,the increment of digestate with higher pollutant loading would need a careful counterplan in the operation of the main stream of the treatment plant.

• Korean Journal of Food Science and Technology
• /
• v.23 no.4
• /
• pp.485-489
• /
• 1991

In order to study the effects of blanching and germination of soybean on the quality of soymilk, the soybeans were differently treated as follow; (1) blanched for 5 min at $100^{\circ}C$, (2) germinated for 2 days at $25^{\circ}C$, (3) germinated for 2 days and then blanched for 5 min at $100^{\circ}C$. The qualities of various soymilks prepared from the treated soybeans were compared with those of soymilk from the untreated soybeans. Blanching of soybeans decreased yields, solid materials, viscosity, total protein, soluble nitrogen, and total sugar of soymilk but no effect on its free sugar contents, specific gravity, and pH. The blanching, however, improved the sensory properties and decreased the n-hexanal contents of soymilk to about 1/2.4. Germination of soybeans improved the yields, physical, chemical, and sensory properties and decreased the n-hexanal contents of soymilk to about 1/5. The germination plus blanching of soybeans showed kind of combined effects of germination's and of blanching's, resulting in the decrease of n-hexanal to about 1/10 and improvement in sensory properties of soymilk.

• Journal of Biosystems Engineering
• /
• v.29 no.3
• /
• pp.267-274
• /
• 2004

Using geo-statistical method, yield data of different fields were analyzed to examine their field variability according to examining year, analysis method. Semivariogram and Kriged maps of geo-statistical analysis were used to examine their spatial dependence within a filed. The results obtained were as follows. 1) Descriptive statistical results of the yield showed that the yield and the difference of yield ranged from 100 to 946kg/10a and from 272 to 653kg/10a, respectively within a field. The coefficient of variation also ranged from 5.9 to 22.4 %. 2) More than 90% of yield data were placed between 350 to 850kg/10a. e results indicated that the gram mass flow sensor should have the measuring range from 0.34 to 0.82kg/s considering the yields when 4 rows head-feeding combine with 0.8 m/s of working speed was utilized. 3) A high spatial dependence was found within paddy field. The Q values ranged from 0.20 to 0.97, and the range of spatial dependence was from 6.9 to 53.3m. From this result, the rational sampling interval for yield investigation was estimated 6.9m. 4) Yields within a field between observation years showed considerable variability even if the field was evenly cultivated and managed. To apply precision agriculture in a paddy field, the field test should be continued to build a solid data-base including meteorological data, blight damage and insect damage.

• Korean Journal of Organic Agriculture
• /
• v.32 no.1
• /
• pp.75-90
• /
• 2024

Biochar is a solid substance with a high carbon content, as it is made out of biomass pyrolyzed under the condition of limited oxygen. This product has attracted attention as an environment-friendly soil amendment because it contributes to carbon neutrally and has improvement effects on the soil environment. This study conducted an experiment to evaluate soil physiochemical properties and microbial community changes in a melon greenhouse according to the applied amount of biochar to investigate the growth characteristics and yields of melons accordingly. In soil physical properties, an increase in the applied amount of biochar resulted in a decrease in bulk density and an increase in porosity of the soil, improving air permeability. In soil chemical properties, an increase in the applied amount of biochar led to a increasing of pH, organic matter and available phosphate content. In the growth characteristics of melons, there was a growing tendency of plant height, leaf length and leaf width according to the increasing application of biochar until 10,000 kg/ha. Moreover, melon yields also increased as the amount of biochar, 13~16% higher in 10,000 kg/ha biochar application than no treatment. Compared differences among microbial communities in the soil according to the application of biochar and found that plant beneficial bacteria dominated in biochar treatments. This study demonstrated the potential of biochar as an effective soil amendment in melon greenhouse by showing improvements in soil physicochemical properties and microbial communities.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.487-496
• /
• 2013

Green coffee beans (CB, Indonesian Mandheling) were fermented with three kinds of mushrooms (Phellinus linteus, PL; Hericium erinaceum, HE; Ganoderma lucidum, GL) or two kinds of mycelia from molds (Monascus purpureus, MP; Monascus ruber, MR) using solid-state culture to enhance physiological activity. After the roasting of fermented green coffee beans, roasted coffees were extracted with a hot-water decoction or 95% ethanol reflux. Yields from hot water extracts (HW, 17.7~25.3%) were higher than those from ethanolic extracts (EE, 9.5~12.2%). Hot-water extracts of roasted coffees from green coffee beans fermented with two molds (MP-CB-HW and MR-CB-HW) showed higher total polyphenols, flavonoids, and DPPH free radical scavenging activity than roasted coffees from non-fermented (CB-HW) or fermented green coffee beans with the three mycelia from mushrooms. MR-CB-HW also had the most potent macrophage stimulating and mitogenic activity (1.32 and 1.40-fold of CB-HW, respectively). In addition, MP-CB-EE and MR-CB-EE did not show any cytotoxicity to the RAW 264.7 cell at a concentration of $100{\mu}g/mL$, and these extracts significantly inhibited nitric oxide (NO) production from the LPS-stimulated RAW 264.7 cell line (38.6 and 37.0% of the LPS-treated group). Meanwhile, the chlorogenic acid concentrations of MP-CB-HW or MR-CB-HW highly increased (to 76.21 or $76.73{\mu}g/mL$, respectively), but caffeine concentrations were not affected by solid-state fermentation. In conclusion, the physiological activities of roasted coffees were enhanced by the solid-state culture of green coffee beans with M. purpureus or M. ruber, suggesting that these roasted coffees could possibly serve industrial applications as functional coffee beverages.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.341-349
• /
• 2004

This study was conducted to compare the effects of arbuscular mycorrhizal fungi (AMF) on the growth and fruit yield of hydroponically grown cucumber and tomato plants in solid medium culture. Mycorrhizal fungus Glomus sp. was collected from plastic film house soils of cucumber and tomato and inoculated to the experimental crops at the time of seeding and transplanting. Root infection of cucumber and tomato plants by AMF was more significantly increased when the AMF was inoculated at seeding stage than at transplanting stage. In the infected roots of cucumber and tomato, mycorrhizal hyphae was easily observed but vesicle and arbuscule were rare. Overall plant growth was increased with AMF inoculation and the growth was higher when AMF was inoculated at seeding stage. Fresh weight of each fruit of cucumber and tomato and sugar content in tomato fruits were significantly increased with AMF inoculation at seeding stage. The AMF inoculation also increased fruit yields of cucumber and tomato.

• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.219-225
• /
• 1998

This study was carried out to determine the optimum nodes of pinching and fruit setting in muskmelon cultured by deep flow technique. A fruit was set either at 7~8th, 11~12th, or 15~16th nodes, and main shoot was pinched either at 22nd or 27th node. Distance between rows was set the same at 100cm, while the distance between plant in the row was set at 25, 35, 45, or 55cm. In treatments with the same node of fruit setting, fruit quality was enhanced and mean fruit weight increased on 22nd node compared to 27th node. terms of fruit quality as affected by node of fruit setting, larger fruits with lower soluble solid concentrations were produced as fruits were set at higher nodes. In terms of planting density, larger fruits with higher concentrations of soluble solid were produced in the 100cm$\times$45cm and 100cm$\times$55cm treatments compared to 100cm$\times$25cm or 100cm$\times$35cm treatment. Total fruit yields decreased as the planting density decreased. However, percent marketable fruits produced was the greatest in the 100cm$\times$45cm treatment, followed in descending order 100cm$\times$25cm, 100cm$\times$35cm, and 100cm$\times$55cm treatments.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.75-85
• /
• 2011

The main purpose of this study is to evaluate the potential of producing bioethanol from yellow poplar ($Liriodendron$ $tulipifera$) wood chips by oxalic acid pretreatment and to examine the pretreatment conditions by response surface methodology (RSM). Based on $2^3$ factorial design, adjusted variables were reaction temperature ($^{\circ}C$), residence time (min), and acid loading (g/g), and a series of distinct 15 experimental conditions was organized with duplication at central point (total 16 performances). After pretreatment, simultaneous saccharification and fermentation (SSF) was subjected on solid fraction with yeast strain $Pichia$ $stipitis$. Maximum ethanol yields of the most samples were measured at 72 hours and applied to RSM as a dependent variable. 9.7 g/${\ell}$ of ethanol was produced from the solid pretreated at $180^{\circ}C$ for 40 min with 0.013 g/g of oxalic acid loading. According to the response surface methodology, it was determined that the temperature is the most governing factor via statistic analysis.