• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.37-44
• /
• 2013

Sodium hypochlorite and ethylene diamine tetra acetic acid are substances usually used during endodontic treatment. Several studies found that the bonding was negated with certain irrigants and some of the used irrigants have demineralizing and chealating effects, so it was advocated to omit the etching step in etch and rinse adhesive systems. The purpose of this in vitro study was to evaluate the influence of NaOCl & EDTA on the bonding strength of ethanol wet bonding. Thirty human molars were selected and mesiodistally sectioned into halves, thus providing sixty specimens. The specimens were randomly assigned to 4 groups(n=15) according to the irrigant regimen used : (1) irrigated with distilled water for 10min (control); (2) irrigated with 5.25% NaOCl(10min), flushed with 5.25% NaOCl(1min) (3) irrigated with 5.25% NaOCl, flushed with 17% EDTA (4) irrigated with 5.25% NaOCl, flushed with 17% EDTA. Each group was acid-etched with 37% phosphoric acid(except group 4) and had their dentin surfaces dehydrated with ethanol solutions : 50%, 70%, 80%, 95%, 3x100%, 30s for each application. After dehydration, a primer( 50% all bond 3 resin + 50% ethanol) was used, followed by the adhesive(ALL-BOND 3 RESIN) application. Resin composite build-ups were then prepared using an incremental technique. Specimens were sectioned into beams and submitted to a tensile load using a Micro Tensile Tester(Bisco Inc.). The data were statistically analyzed using one-way ANOVA and Tukey HSD at p<0.5 level. There was no significant difference on G1(control) and G2(irrigated with NaOCl only ). (p>0.05). G3(flushed with EDTA) showed significantly high tensile bonding strength compared to the G2 (p<0.05). G4( treated with EDTA but no acid-etching) was significantly lower value than G3. (p<0.05) Although there was no significant difference, 5.25% NaOCl seemed to have an adverse effect on the bonding strength of ethanol wet bonding. The flushing with EDTA after NaOCl irrigation prevents the decrease of bonding strength. The use of 17% EDTA as a final flush can enhance the bonding strength but EDTA flushing can't substitute for a acid-etching.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.595-602
• /
• 1996

The antimicrobial effects of two disinfectants commonly used in food industry on Listeria monocytogenes ATCC 15313 were studied. The two disinfectants tested were commercial benzalkonium chloride (BAC) and sodium hypochlorite (NaOCl). Their effects were studied on cells suspended in disinfectants (in vitro) and in the sponge model with the disinfectants (in vivo). When cells were exposed to $0\~0.1\%$ BAC and $0\~150\;ppm$ NaOCL for 20 minutes, BAC and NaOCl concentration more than $0.25\%$ and 100 ppm showed the antimicrobial effects respectively. This organism decreased rapidly during the first $0.5\~1$ minute followed by a slower decrease during the rest of the exposure time. Fifteen ml of cell solution $(about\;10^7\;CFU/ml\;in\;the\;TSB)$ was mixed with 15 ml of disinfectants in the sponge $(6.0{\times}4.0{\times}4.0cm)$, BAC and NaOCl concentration more than $0.1\%$ and 300 ppm showed the antimicrobial effects, and at $0.25\%$ and 800 ppm diminished in cell numbers 3-log cycles during the first 20 minutes. In the case of sponge model, 15 ml of cell solution and 15 ml of disinfectants $(0.25\%\;of\;BAC,\;800\;ppm\;of\;NaOCl)$ were suspended in the sponge during 20 minutes, washing with 200 ml of sterilized distilled water, and this sponge was transfered in the 100 ml TBS, and then incubated at various temperature. The cells were increased about 1-log cycle during 24 hrs at $5\~15^{\circ}C$. And the others temperature, the cells growth was in proporation to storage tepmerature and the cells were about $10^9\;CFU/ml$ after $1\~3$ days incubations.

• Membrane Journal
• /
• v.30 no.2
• /
• pp.138-148
• /
• 2020

The purpose of this study was to identify the cleaning efficiency of fouled multi-bore hollow fiber membranes after purification of contaminated water. The PSf (polysulfone) based hollow fiber membrane manufactured by Pure & B Tech Co., Ltd. Was used in this study. The antifouling characteristics during the water treatment were studied using bovine serum albumin (BSA) as a model compound and the chemical resistance was evaluated after long-term impregnation in sodium hypochlorite (NaOCl) solution and Citric acid to understand the long term stability of the membranes. Water permeability and mechanical strength of the membranes after prolonged chemical exposure was measured to observe the change in mechanical stability and long term performance of the membrane. moreover, the recovery efficiency was also evaluated after chemical enhanced backwashing of a membrane contaminated with bovine serum albumin. The PSf hollow fiber membrane exhibited excellent chemical resistance, and it was confirmed that the efficiency of sodium hypochlorite was high as a result of chemical enhanced backwashing.

• Restorative Dentistry and Endodontics
• /
• v.40 no.3
• /
• pp.195-201
• /
• 2015

Objectives: The use of chitosan nanoparticles (CNPs) in endodontics is of interest due to their antibiofilm properties. This study was to investigate the ability of bioactive CNPs to remove the smear layer and inhibit bacterial recolonization on dentin. Materials and Methods: One hundred bovine dentin sections were divided into five groups (n = 20 per group) according to the treatment. The irrigating solutions used were 2.5% sodium hypochlorite (NaOCl) for 20 min, 17% ethylenediaminetetraacetic acid (EDTA) for 3 min and 1.29 mg/mL CNPs for 3 min. The samples were irrigated with either distilled water (control), NaOCl, NaOCl-EDTA, NaOCl-EDTA-CNPs or NaOCl-CNPs. After the treatment, half of the samples (n = 50) were used to assess the chelating effect of the solutions using portable scanning electronic microscopy, while the other half (n = 50) were infected intra-orally to examine the post-treatment bacterial biofilm forming capacity. The biovolume and cellular viability of the biofilms were analysed under confocal laser scanning microscopy. The Kappa test was performed for examiner calibration, and the non-parametric Kruskal-Wallis and Dunn tests (p < 0.05) were used for comparisons among the groups. Results: The smear layer was significantly reduced in all of the groups except the control and NaOCl groups (p < 0.05). The CNPs-treated samples were able to resist biofilm formation significantly better than other treatment groups (p < 0.05). Conclusions: CNPs could be used as a final irrigant during root canal treatment with the dual benefit of removing the smear layer and inhibiting bacterial recolonization on root dentin.

• Restorative Dentistry and Endodontics
• /
• v.39 no.2
• /
• pp.95-103
• /
• 2014

Objectives: This study evaluated the effect of three antioxidizing agents on pullout bond strengths of dentin treated with sodium hypochlorite. Materials and Methods: Root canals of 75 single-rooted human teeth were prepared. Fifteen teeth were irrigated with normal saline for a negative control group, and the remaining 60 teeth (groups 2 - 5) with 2.5% NaOCl. The teeth in group 2 served as a positive control. Prior to post cementation, the root canals in groups 3 - 5 were irrigated with three antioxidizing agents including 10% rosmarinic acid (RA, Baridge essence), 10% hesperidin (HPN, Sigma), and 10% sodium ascorbate hydrogel (SA, AppliChem). Seventy-five spreaders (#55, taper .02, Produits Dentaires S.A) were coated with silica and silanized with the Rocatec system and ceramic bond. All the prepared spreaders were cemented with a self-adhesive resin cement (Bifix SE, Voco Gmbh) in the prepared canals. After storage in distilled water (24 h/$37^{\circ}C$), the spreaders were pulled out in a universal testing machine at a crosshead speed of 1.0 mm/min. Pull-out strength values were analyzed by one-way ANOVA and Tukey's HSD test (${\alpha}$ = 0.05). Results: There were significant differences between study groups (p = 0.016). The highest pullout strength was related to the SA group. The lowest strength was obtained in the positive control group. Conclusions: Irrigation with NaOCl during canal preparation decreased bond strength of resin cement to root dentin. Amongst the antioxidants tested, SA had superior results in reversing the diminishing effect of NaOCl irrigation on the bond strength to root dentin.

• Journal of fish pathology
• /
• v.13 no.2
• /
• pp.97-102
• /
• 2000

In order to investigate the effect of chlorine disinfectant against white spot baculovirus (WSBV), 5, 10, or 30 ppm of sodium hypochlorite (NaOCl) was treated to the WSBV-infected shrimp, Penaeus chinensis. In contrast with the non-treated control, no shrimp was dead after of sodium hypochlorite treatment. This result indicated that WSBV was inactivated by chlorine treatment. No inactivation of WSBV was observed by 10, 20, 30 ppm of povidon-iodine treatment. WSBV was also inactivated by 2, 4 hr sunlight exposure and by 1, 2, 3 hr drying. WSBV was inactivated very effectively by addition of fresh water on sea water.

• Journal of Environmental Health Sciences
• /
• v.44 no.3
• /
• pp.244-249
• /
• 2018

Objectives: The purpose of this study was the investigation of bromide and bromate in drinking water of water supply plants, mineral springs and small water supply system located in northern area of Gyeonggi province. Methods: Analytical method was based on EPA 326.0 to use Postcolumn reaction (PCR). The instrument was 887 professional UV/VIS detector IC manufactured in Metrohm. Results: Bromate was detected at $0.5{\sim}2.4{\mu}g/L$ in tap water from 5 water supply plants. These plants were used as disinfection method for sodium hypochlorite and on-site chlorine that causes generate bromate as a by products even if not used ozone. Conclusions: The bromate was detected up to $2.5{\mu}g/Lin$ drinking water in northern Gyeonggi area that showed within $10{\mu}g/L$ for standard of tap water. However, the continuous monitoring of bromate is necessary in drinking water.

• Membrane and Water Treatment
• /
• v.14 no.2
• /
• pp.85-93
• /
• 2023

Membrane separation is widely used for several applications such as water treatment, membrane reactors and climate change. Cross-linked organic-inorganic hybrid polyvinylidene fluoride (PVDF) / Tetraethyl orthosilicate (TEOS) was adopted for the preparation of optimized hollow membrane (HFM) for membrane distillation or other low pressure separators for mechanical properties and permeability under varying pretreatment schemes. HFMs were prepared on semi-pilot membrane fabrication system. Novel adopted post-treatment schemes involved soaking in glycerol, magnesium sulphate (MgSO₄), sodium hypochlorite (NaOCl), and isopropanol for different durations. All fibers were characterized for morphology using a scanning electron microscope (SEM), surface roughness using atomic force microscope (AFM), elemental composition by examining Energy Dispersive Spectroscopy (EDS), water contact angle (CA°) and porosity. The performance of the fibers was evaluated for pure water permeation flux (PWF). Post-treatment with MgSO₄ gave the highest both tensile modulus and flux. Assessment of properties and performance revealed comparable results with other organic-inorganic separators, HF or flat. In spite of few reported data on post treatment using MgSO₄ in presence of TEOS, this proves the potential of low cost treatment without negative impact on other membrane properties. The flux is also comparable with hypochlorite which manifests substantial precaution requirements in actual industrial use.The relatively high values of flux/bar for sample treated with TEOS, post treated with MgSO₄ and hypochlorite are 88 and 82 LMH/bar respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1830-1841
• /
• 2012

We investigated the changes in microbial and physicochemical characteristics of the raw materials of Saengsk (brown rice, barley, carrot, potato, Angelica utilis Makino and kale) during storage after treatment with slightly acidic electrolyzed water (SAEW). To confirm the antimicrobial effects of the treatment washing solutions as well as the physicochemical changes in chromaticity, we stored the raw materials of Saengsik for 5, 10, 15, 20, 25 and 30 days at storage temperatures of 4, 10, 15, 20, 25 and $30^{\circ}C$ in a shelf-life study. The effects of microbial inhibition were higher in carrot treated with SAEW than in that treated with NaOCl, as indicated by a 1.75 log CFU/g reduction. Moreover, a 1.54 log CFU/g reduction of total coliforms was achieved in brown rice in response to SAEW treatment, which was higher than NaOCl treatment at all storage temperatures and periods. The lightness, redness and yellowness values of the raw materials of Saengsik were not significantly affected by SAEW treatments, except for Angelica utilis Makino and kale, whereas SAEW treatment resulted in decreased chromaticity values when compared to the NaOCl treatment. Overall, there was a significant difference (p<0.05) between the efficacy of the SAEW and NaOCl treatments. These results indicate that washing with SAEW is an effective method to reduce the microorganisms and enhance the shelf-life of raw materials of Saengsik; therefore, it can be effectively used to sanitize ingredients of Saengik without affecting the other properties during storage.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.3
• /
• pp.211-220
• /
• 2018

The water containing soluble manganese may cause problems such as discolored water, unpleasant taste, fouling or scaling of pipes in water distribution system, and so on. Conventional water treatment processes using sand filtration or sedimentation after oxidation, however, cannot often meet manganese standard for drinking water. Two types of oxidants, potassium permanganate ($KMnO_4$) and sodium hypochlorite (NaOCl), were utilized at the same time for manganese oxidation, and then the precipitated manganese oxides were removed by low pressure membrane filtration in this study. In batch experiments, the multiple injection of both oxidants showed more effective manganese removal than did the single injection using either of them. Moreover, the deterioration of manganese removal at low temperature was less serious for the multiple injection than that for the single injection. Manganese removal by the continuous system of oxidation by multiple injection combined with membrane filtration was higher than those by batch experiments at the same oxidation conditions. In addition, less membrane fouling was observed for membrane filtration with oxidation during continuous membrane filtration than membrane filtration without oxidation. These results indicate that the oxidation by multiple injection coupled with membrane filtration was efficient and applicable to actual water treatment for manganese removal.