• 한국의류학회지
• /
• 제29권6호
• /
• pp.764-771
• /
• 2005

This study is to increase the efficiency for the suitability of clothing measurement and the production utility factors by setting up the measurement system with middle-aged men's physical characteristics. For this purpose this study measured the body sizes of middle-aged men and analyzed basic sizing items such as drop, height, and bust according to the ISO and KS systems and classified these sizes based on body shapes and heights. As a result, an internationally-compatible measuring system is presented in this study. The most common body shapes are portly (Drop 6) and regular (Drop 12) types and these two types form $74.7\%$. The height of 164cm$(31.2\%)$ and 170cm$(38.2\%)$ cover $69.4\%$; and the most general sizes of busts are 92, 96 and 100 and these sizes occupy $74.7\%$. In consideration of the ranges of height and bust, the general sizes (7 regular types and 9 portly types) are selected to present the standardized measurements; the mark for the top is height-bust-waist and the mark for the bottom is stature-waist-hip.

• 대한의용생체공학회:의공학회지
• /
• 제36권4호
• /
• pp.86-94
• /
• 2015

In order for medical devices to be used outside hospital, they have to be not only of small size but also power consumption has to be kept at low level. This study investigates the feasibility of application of ADS1298 ECG single-chip solution developed by Texas Instruments Inc. for use in development of a new platform for diagnostic resting ECG. To prove the feasibility of commercial products based on the ADS1298 chip, the performance of the ADS1298 chip was measured in terms of input impedance, common mode rejection, frequency response, and input dynamic range using the testing method under the suitability criteria of the IEC 60601-2-25 standard. Result of the this study shows that commercialization of the ECG products based on the ADS1298 ECG single-chip solution that satisfies the international standards would be possible, if the manufactures take the filter characteristics into account in building a new platform for diagnostic resting ECG.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.394-399
• /
• 2012

최근 MEMS 센서는 기계상태감시에 있어서 전력소모, 크기, 비용, 이동성, 응용 등에 있어서 각광을 받고 있다. 특히, MEMS 센서는 스마트센서와 통합가능하고, 대량생산이 가능하여 가격이 저렴하다는 장점이 있다. 이와 관련한 기계상태감시를 위한 많은 실험적 연구가 수행되고 있다. 이 논문은 MEMS 센서들을 3 가지 인공지능 분류기 성능평가를 위한 비교연구에 대해 설명하고 있다. 회전기계에 MEMS 가속도와 전류센서들을 부착하여 데이터를 취득했고, 특징추출과 파라미터 최적화를 위해 Cross validation 기법을 사용하였다. MEMS 센서를 이용한 결함분류기 적용은 적합하다고 판단된다.

• 디지털산업정보학회논문지
• /
• 제14권3호
• /
• pp.145-153
• /
• 2018

The purpose of this study is to seek ways how you can apply social responsibility requirements in accordance with the organizational characteristics of 'Dong' community service centers which are administrative service platform organizations, by applying the ISO 26000 to these centers. The ISO 26000, which is an international standard for social responsibility, defines the requirements for social responsibility which all organizations, regardless of their sizes or characteristics, can apply. This does not mean that all organizations must apply all the requirements regardless of their sizes or characteristics, but means that each organization can redefine the requirements applicable to its size and characteristics and apply them. Hence, this study defined 'Dong' community service centers' organizational characteristics and stakeholders and assessed the suitability of 251 categories in the ISO 26000 requirements by using the Delphi technique. Through this assessment process, 135 categories were selected. Then, after conducting an importance test by experts, 83 social responsibility assessment indicators applicable to 'Dong' community service centers were developed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1043-1052
• /
• 2009

To derive easily the coefficient of permeability from several other soil properties, the estimation model of coefficient of permeability was proposed using linear regression analysis. The coefficient of permeability is one of the major factors to evaluate the soil characteristics. The study area is located in Kangwon-do Pyeongchang-gun Jinbu-Myeon. Soil samples of 45 spots were taken from the study area and various soil tests were carried out in laboratory. After selecting the soil factor influenced by the coefficient of permeability through the correlation analysis, the estimation model of coefficient of permeability was developed using the linear regression analysis between the selected soil factor and the coefficient of permeability from permeability test. Also, the estimation model of coefficient of permeability was compared with the results from permeability test and empirical equation, and the suitability of proposed model was proved. As the result of correlation analysis between various soil factors and the coefficient of permeability using SPSS(statistical package for the social sciences), the largest influence factor of coefficient of permeability were the effective grain size, porosity and dry unit weight. The coefficient of permeability calculated from the proposed model was similar to that resulted from permeability test. Therefore, the proposed model can be used in case of estimating the coefficient of permeability at the same soil condition like study area.

• 한국병원경영학회지
• /
• 제13권2호
• /
• pp.64-85
• /
• 2008

This study purports to investigate the determinant of job satisfaction among workers working at Long-term care hospitals. The independent variables contain three groups of determinants: organizational characteristics variables(job autonomy, job variety, distributive justice, role conflict, supervisor support, job suitability, job significance, job security, organizational support, job growth, promotional opportunity), environmental variables(job opportunity), and psychological variables (met expectation, job efficacy, positive affectivity, and negative affectivity). The sample used in this study consisted of 250 workers from 4 Long-term care hospitals nationwide. Data were collected with self-administered questionnaires and analyzed using multiple regression analysis. The results of the study are as follows: 1) the following variables, listed in order of size, have significant effects on job satisfaction: negative affectivity(-), job significance(+), job growth(+), age(+), positive affectivity(+), organizational support(+), job opportunity(-). 2) the variance of job satisfaction explained by the variables used in the study are 53.8%. When demographic variables added to Model I, job satisfaction explained by variables are 55.4%. 3) the results of this study indicate that three variables of negative affectivity, job significance, job growth are especially important for improving the level of job satisfaction among workers at Long-term care hospitals.

• Smart Structures and Systems
• /
• 제1권4호
• /
• pp.355-368
• /
• 2005

Large and complex structures are being built now-a-days and, they are required to be functional even under extreme loading and environmental conditions. In order to meet the safety and maintenance demands, there is a need to build sensors integrated structural system, which can sense and provide necessary information about the structural response to complex loading and environment. Sophisticated tools have been developed for the design and construction of civil engineering structures. However, very little has been accomplished in the area of monitoring and rehabilitation. The employment of appropriate sensor is therefore crucial, and efforts must be directed towards non-destructive testing techniques that remain functional throughout the life of the structure. Fiber optic sensors are emerging as a superior non-destructive tool for evaluating the health of civil engineering structures. Flexibility, small in size and corrosion resistance of optical fibers allow them to be directly embedded in concrete structures. The inherent advantages of fiber optic sensors over conventional sensors include high resolution, ability to work in difficult environment, immunity from electromagnetic interference, large band width of signal, low noise and high sensitivity. This paper brings out the potential and current status of technology of fiber optic sensors for civil engineering applications. The importance of employing fiber optic sensors for health monitoring of civil engineering structures has been highlighted. Details of laboratory studies carried out on fiber optic strain sensors to assess their suitability for civil engineering applications are also covered.

• 복식문화연구
• /
• 제20권3호
• /
• pp.319-329
• /
• 2012

The market share of conglomerates is increasing in the Korean school uniform market these days. Functional fit problems occurred. Girls choose slim silhouette often experienced fit problems. The purpose of this study is to probe for functional design elements of high school girls' uniforms. A questionnaire survey was carried out. 202 high school girls took part in the survey. The questionnaire measured school uniform brand preference and size of school uniform jackets. The results of the survey show that over half of participants(56.6%) wore their jackets over nine hours per day. They considered the aesthetics of the design as the most important factor when purchasing school uniforms. That element affected their brand preference. In analyses of the fit suitability, there were no significant differences between brands. The jacket lengths were significantly different among brands, but all were evaluated as being short. About 60% of students had difficulty raising their arms while wearing their school uniform jackets. The results of this study revealed that high school girls' uniform jackets are too short and tight. Ergonomic design elements should be applied to high school girls' uniform jackets.

• 한국의류학회지
• /
• 제19권4호
• /
• pp.615-627
• /
• 1995

The purpose of this study is to identify the difference of value and clothing behavior by generation, and to suggest a [device for family concord by overcoming a generation gap. Data was obtained from 106 families(daughter, mother, and grandmother in one family), of which the daughter was attending Ewha Womans University. And it was analyzed by ANOVA, Duncan.test, x2_test, ANCOVA ant two-way ANOVA. The results of this study were as follows. 1. Each generation showed different values. Mother and grandmother perceived greater importance for each value except political value. 2. Each generation has its own clothing behavior characteristics. Style, silhouette, skirt length, and neckline preferrences were different by generatiorts. In general, mothers and grandmothers showed si mil ar characteristics. Wearing size and subjective feeling for suitability were also different by generation. Finally in consumption behavior, preferred clothing price and expenditure were also differed by generation.

• 한국주조공학회지
• /
• 제19권5호
• /
• pp.393-402
• /
• 1999

The reheating of the billet in the semi-solid state as quickly and homogeneously as possible is one of the most important aspects. From this point of view, an optimal design of the induction coil is necessary. The objective of inductive coil designsi a uniform induction heating over the length of the billet. The effect of coil length, diameter, the gap between coil surface and billet and axial position of the billet on temperature distribution of billet has been investigated. These design parameters have an important effectiveness on the electro-magnetic field. Therefore, in this study an optimal coil design to minimize electromagnetic ed effect will be proposed by defining the relationship between billet length and coil length. In particular, key point in induction heating process is focussed on optimizing the coil design with regard to the size of the heating billet and the frequency of induction heating system. After demonstrating the suitability of an optimal coil design through the FEM simulation of the induction heating process, the results of the coil design are also applied to the reheating process to obtain a fine globular microstructure. Its considered that the reheating conditions of aluminum alloys for thixoforging and a new CAE model of the induction heating process are very useful for thixoforging practitioners including induction heating ones.