• Korean Journal of Crystallography
• /
• v.5 no.1
• /
• pp.24-32
• /
• 1994

The study of (0001), (1120) and (1011) GAN epitaxy films grown on the (0001),(1012) and (1120) α-Al2O3 substrates have been investigated using the haliar vapor phaes epitaxy(HVPE) method in Ga/HCI/NH3/He system. XRD, RHEED and SEM are used for the study of the films struction and surface morphology. Chemical composition of the film surface is estimsted by XPS. The following orientation relationships are observed; (0001) GaN /(0001) Al2O3 (1120) GaN/ (1012) Al2O3 and (0001) and (1011) GaN/ (1120) Al2O3 in accordance with growth conditions. The (0001) GaN films grown on(0001) and (1120) a-Al2O3 substrates at higer temperature(1050℃) have shown two dimensional grownth mechanism. Form SEM and RHEED, the smoother surface morphology and better structure are observed for the (1011) GaN films grown on (1120) sapphire at higer temperature.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2012

Because the contact time between satellite and ground station is very limited in LEO (Low Earth Orbit) satellite, all telemetry data generated on spacecraft bus are stored in a mass memory and downlinked to the ground together with real time data during the contact time. The mass memory is initialized in the first system initialization phase and the page status of each memory block is generated step by step. After the completion of the system initialization, the telemetry data are continuously stored and the stored data are played back to the ground by command. And the memory scrubbing is periodically performed for correction of single bit error which can be generated on harsh space environment. This paper introduces the mass memory operation method for telemetry processing of LEO satellite. It includes a general mass memory data structure, the methods of mass memory initialization, scrubbing, data storage and downlink, and mass memory management of primary and redundant mass memory.

• The Korean Journal of Ceramics
• /
• v.3 no.4
• /
• pp.263-268
• /
• 1997

RuO$_3$ thin films were deposited on Si(100) substrate at low temperatures by hot-wall metalorganic chemical vapor deposition. Bis(cyclopentadienyl) ruthenium, Ru$(C_5H_5)_2$, was used as the precursor RuO$_2$single phase was obtained at a low deposition temperature of 25$0^{\circ}C$ and the crystallinity of RuO$_2$thin films improved with increasing deposition temperature. RuO$_2$thin films grow perpendicularly to the substrate and show the columnar structure. The grain size of RuO$_2$films drastically increases with increasing the deposition temperature. The resistivity of the 180 nm-thick RuO$_2$thin films deposited at 27$0^{\circ}C$ was 136 $\mu$$\Omega$-cm and increased with decreasing film thickness. SrBi$_2Ta_2O_4$ thin films deposited by rf magnetron sputtering on the RuO$_2$bottom electrodes showed a fatigue-free characteristics up to ~10$^10$ cycles under 5 V bipolar square pulses and the remanent polarization, 2 P$_r$ and the coercive field, 2 E, were 5.2$\mu$C/$\textrm{cm}^2$ and 76.0 kV/cm, respectively, for an applied voltage of 5 V The leakage current density was about 7.0$\times$10$^{-6}$ A/$\textrm{cm}^2$ at 150 kV/cm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.15-22
• /
• 2012

This paper deals with the performance comparison and evaluation of blind adaptive equalizer, the PMCMA-MDD and DW-MCMA, that is used for compensation of the amplitude and phase distortion which occurs in the time dispersive channel. Basically, these algorithms are modification of MCMA cost function in order to obtain the fast convergence speed and reduced residual isi by taking the parallel and serial double structured and the combination of the concept of RCA for the updating the tap coefficient. We implements the algorithm of it and compare the recovered constellation, residual isi, MSE characteristics curve and SER in the signal to noise ratio given the time dispersive channel. As a result of simulation, the PMCMA-MDD has a good in recovered constellation than DW-MCMA. But in the SER, the DW-MCMA has a good than PMCMA-MDD.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.210-214
• /
• 2014

The effects of manganese substitution on the crystallographic and magnetic properties of Li-Zn-Cu ferrite, $Li_{0.5}Zn_{0.2}Cu_{0.4}Mn_xFe_{2.1-x}O_4$ ($0.0{\leq}x{\leq}0.8$), were investigated. Ferrites were synthesized via a conventional ceramic method. We confirmed the formation of crystallized particles using X-ray diffraction, field emission scanning electron microscopy and $M{\ddot{o}}ssbauer$ spectroscopy. All of the samples showed a single phase with a spinel structure, and the lattice constants linearly decreased as the substituted manganese content increased, and the particle size of the samples also somewhat decreased as the doped manganese content increased. All the $M{\ddot{o}}ssbauer$ spectra can be fitted with two Zeeman sextets, which are the typical spinel ferrite spectra of $Fe^{3+}$ with A- and B-sites, and one doublet. The cation distribution was determined from the variation of the $M{\ddot{o}}ssbauer$ parameters and of the absorption area ratio. The magnetic behavior of the samples showed that an increase in manganese content led to a decrease in the saturation magnetization, whereas the coercivity was nearly constant throughout. The maximum saturation magnetization was 73.35 emu/g at x = 0.0 in $Li_{0.5}Zn_{0.2}Cu_{0.4}Mn_xFe_{2.1-x}O_4$.

• Journal of the Korean Ceramic Society
• /
• v.50 no.3
• /
• pp.195-200
• /
• 2013

Here, we report preparation of cyan ceramic nano-pigment for inkjet printing and the Ni substitutional effects on the cyan color. $MgAl_2O_4$ was selected as the crystalline host network for the synthesis of nickel-based cyan ceramic nano-pigments. Various compositions of $Ni_xMg_{1-x}Al_2O_4$ ($0{\leq}x{\leq}1$) powders were prepared using the polymerized complex method. The powder was then preheated at $400^{\circ}C$ for 5 h and finally calcined at $1000^{\circ}C$ for 5 h. XRD patterns of $Ni_xMg_{1-x}Al_2O_4$ showed a single phase of the spinel structure in all the compositions. The particle sizes ranged from 20 to 50 nm in TEM observations. The characteristics of the color tones of $Ni_xMg_{1-x}Al_2O_4$ were analyzed by UV-Visible spectroscopy and CIE $L^*a^*b^*$ measurement. CIE $L^*a^*b^*$ measurement results indicate that the pigment color changes from light cyan to deep cyan due to the decrease of the $a^*$ and $b^*$ values with an increase of an Ni substitutional amount. In addition, the thermal stability and the binding nature of $Ni_xMg_{1-x}Al_2O_4$ are also discussed using TG-DSC and FT-IR results respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.261-264
• /
• 2017

$Ni_{0.79}Co_{0.15-x}Cu_xMn_{2.06}O_4$ ($0{\leq}x{\leq}0.09$) thick films were fabricated using the conventional solid-state reaction method and screen-printing method. Structural and electrical properties of specimens based on the amount of Cu were observed in order to investigate their applicability in the infrared detector. All specimens showed a single spinel phase with a homogeneous cubic structure. As the amount of Cu increased, the average grain size increased and was found to be approximately $5.01{\mu}m$ for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen. The thickness of all specimens was approximately $55{\sim}56{\mu}m$. As Cu content increased, the resistivity and TCR properties at room temperature decreased, and these values for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen were $502{\Omega}-cm$ and $-3.32%/^{\circ}C$, respectively. The responsivity and noise properties decreased with an increase in Cu content, with the specimen with a Cu content of x=0.09 showing 0.0183 V/W and $5.21{\times}10^{-5}V$, respectively.

• Korean Journal of Materials Research
• /
• v.27 no.3
• /
• pp.144-148
• /
• 2017

The effects of an excess of Bi on the piezoelectric and dielectric properties of $0.60Bi_{1+x}FeO_3-0.40BaTiO_3$ (x = 0, 0.01, 0.03, 0.05, 0.07) were investigated. The ceramics were processed through a conventional solid state reaction method and then quenched after sintering at different temperatures in the range of $980{\sim}1070^{\circ}C$. A single perovskite structure without any secondary phase was confirmed for all compositions and temperatures. It was found that excess Bi reduced the sintering temperatures, acted as a sintering aid and enhanced the properties in combination with quenching. Curie temperature ($T_C$) was found to slightly increase due to the presence of excess Bi; electrical properties were also improved by quenching. At x = 0.03 and $1030^{\circ}C$, remnant polarization ($2P_r$) was as high as $45.4{\mu}C/cm^2$ and strain at 40 kV/cm was up to 0.176 %.

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.33-39
• /
• 1997

Single phase pero~~skite lead lanthanum titanate thin films were fabricated on $Pt/Ti/SiO_2/Si$ substrates at the temperature of $480^{\circ}C$ by electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECR PECVD) using metal organic sources $Pb(DPM)_2$ pre-flowing treatment in ECIi oxygen plasma before fabricating PLT films 11romote the perovskite nucleation due to stable supplying of the $Pb(DPM)_2$ and providing the F'h-rich atmosphere in the early stage of deposition. $Pb(DPM)_2$ pie-flonring treatment enhanced the properties of PLT films. The charactcristics of the PLT filrris were investigated as a tunction of the flow rate of Ti-source. The PL'i' films were grown in a perovskite structure tvith (100) preferred orientation. The high X-ray diffraction intensity and dielectric constant were obtained from the stoichiometric perovskite $(Pb,La)TiO_3$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.2
• /
• pp.151-158
• /
• 2002

The hydorgen storage alloys were produced by melting in arc melting furnace and then solution heat treated at $1,100^{\circ}C$ followed by pulverization. The chemical analysis on the samples showed that the major elements of misch metal(Mm) were La, Ce, Pr and Nd with impurity less than 1wt.%. X-ray diffraction indicated that the structure for these samples were a single phase of hexagonal with $CaCu_5$ type. Compared to the initial particle size $100{\sim}110{\mu}m$, the many fine cracks were found and particle size decreased to $14{\mu}m$ for $MmNi_{4.5}Mn_{0.5}$ after hydriding/dehydring test run. To activate the sample the vessel filled with hydrogen storage alloys was first evacuated for for at $70^{\circ}C$ and then treated for 10.5hr under hydrogen pressure of 20atm for $MmNi_{4.5}Mn_{0.5}$ alloy. The experimental data showed that the hydrogen storage alloy of $MmNi_{4.5}Mn_{0.5}$ had superior adsorption and description properties within a temperature rang of $40^{\circ}C{\sim}80^{\circ}C$ and also they had a good P-C-T curve.