• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.367-374
• /
• 2005

The use of system identification approaches for damage detection has been expanded in recent years. Soft computing techniques such as neural networks have been utilized increasingly. Damage assessment using neural networks is presented in this study. Data set for training neural networks are acceleration response of simple beam under the various damage states ,which are the inputs. The outputs are the damage locations and extents. Not only the trained damages but also untrained damages are. detected accuratelyintheassessmentstage.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.443-447
• /
• 2001

In this paper, a robust sensorless vector control system for induction motors with a speed estimator and an uncertainty observer is presented. At first, the proposed speed estimator is based on the MRAS(Mode Reference Adaptive System) scheme and constructed with a simple fuzzy logic(FL) approach. The structure of the proposed FL estimator is very simple. The input of the FL is the rotor flux error difference between reference and adjustable model, and the output is the estimated incremental rotor speed Secondly, the unmodeled uncertainties such as parametric uncertainties and external load disturbances are modeled by a radial basis function network(RBFN). In the overal speed control system, the control inputs are composed with a norminal control input and a compensated control input, which are from RBFN observer output and the modeling error of the RBFN, repectively. The compensated control input is derived from Lyapunov unction approach. The simulation results are presented to show the validity of the proposed system.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.54-64
• /
• 1997

This paper provides a practical control scheme called three-step input method in order to minimize both robot response time and the resulting residual vibration when the robot manipulator reaches its defined end point. This work is concerned with defining a simple practical method to utilize step inputs to achieve optimum response. The optimum response is achieved by using a self- adjusting input command function that is obtained during a real time processing . The practicality of this control scheme is demonstrated by using an analog computer to simulate a simulate a simple flexible robot and conventional servo controller. The experiments focus on point-to-point movement. Also, this method requires little computational effort through the intelligent use of conventional servo control technology and the robot's vibration characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.827-829
• /
• 1999

The identification of nonlinear system using Extended GMDH(EGMDH) is studied in this paper. The proposed EGMDH algorithm is based on GMDH(Group Method of Data handling) method and its structure is similar to Neural Networks. The each node of EGMDH structure utilizes several types of high-order polynomial such as linear, quadratic and cubic, and is connected as various kinds of multi-variable inputs. As the operating condition changes, the parameters of EGMDH will also change, so the proposed scheme by means of the EGMDH method is capable of adapting rapidly to the changing environment. The simulation result shows that the simple nonlinear process can be modeled reasonably well by the proposed method which are simple but efficient.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1685-1686
• /
• 2008

Almost all existing controllers for nonholonomic mobile robots are designed without considering the motor dynamics. This is because the presence of the motor dynamics increases the complexity of the system dynamics, and makes difficult the design of the controller. In this paper, we propose a simple controller for trajectory tracking of mobile robots including motor dynamics. For the simple controller design, the dynamic surface control methodology is applied and extended to multi-input multi-output systems (i.e., mobile robots) that the number of inputs and outputs are different. Finally, simulation results demonstrate the effectiveness of the proposed controller.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 춘계학술대회 학술발표 논문집
• /
• pp.105-108
• /
• 1997

We developed a FLC(Fuzzy Logic Controller) for tracking control of MR(Mobile Robot) with obstacle avoidance. In this research, we made a heuristic approach to tracking control which is simple and efficient in almost every situation using FLC. In addition, smooth turn is accomplished and also obstacles are avoided. Also we used the XX(don't care) linguistic variable for inputs in FLC to make simple rule-table. With various simulations, the validity of our FLC was shown.

• 전자공학회논문지A
• /
• 제30A권3호
• /
• pp.114-129
• /
• 1993

A FFT array processor algorithm and architecture which anc use a minumum required number of simple, duplicate multiplier-adder processing elements according to various computation speed, will be presented. It is based on the p fold symmetry in the radix p constant geometry FFT butterfly stage with shuffled inputs and normally ordered outputs. Also, a methodology to implement a high performance high radix FFT with VLSI by constructing a high radix processing element with the duplications of a simple lower radix processing element will be discussed. Various performances and the trade-off between computation speed and hardware complexity will be evaluated and compared. Bases on the presented architecture, a radix 2, 8 point FFT processing element chip has been designed and it structure and the results will be discusses.

• 대한전자공학회논문지SP
• /
• 제46권6호
• /
• pp.163-174
• /
• 2009

부밴드 구조에서 적응필터에 최대 다위상 분해와 노블아이덴티티를 적용함으로써 전밴드 인접투사 알고리즘은 부밴드 인접투사 알고리즘으로 변환된다. 최대 다위상 분해된 부밴드 인접투사 (Maximally Polyphase Decomposed Subband Affine Projection: MPDSAP) 알고리즘은 각 부밴드의 적응 부필터에서 사용되는 투사차원이 1인 부밴드 인접투사 알고리즘의 특별한 형태다. MPDSAP 알고리즘의 계수갱신식은 NLMS 알고리즘과 유사한 형식을 갖기 때문에 실제 구현관점에서 보다 좋은 알고리즘 선택이 될 수 있다. 본 논문은 MPDSAP 알고리즘의 새로운 통계적 해석을 제시한다. 해석적 모델은 정규직교 분해필터를 갖는 부밴드 구조에서 Autoregressive (AR) 입력과 임의의 적응이득에 대해 유도된다. 정규직교 분해필터에 의한 사전 백색화는 AR 입력과 임의의 적응이득에 대한 MPDSAP 알고리즘의 간단한 해석적 모델의 유도를 가능하게 한다.

• 제어로봇시스템학회논문지
• /
• 제21권12호
• /
• pp.1173-1177
• /
• 2015

This paper deals with estimating the acid concentration of pickling process using the Volterra inputs. To estimate the acid concentration, the whole pickling process is represented by the grey box model consists of the white box dealing with known system and the black box dealing with unknown system. Because there is a possibility of nonlinear term in the unknown system, the Volterra series are used to estimate the acid concentration. For the white box modeling, the acid tank solution level and concentration equations are used, and for the black box modeling, the acid concentration is estimated using the Volterra Least Mean Squares (LMS) algorithm and Least Squares (LS) algorithm. The LMS algorithm has the advantage of the simple structure and the low computation, and the LS algorithm has the advantage of lowest error. The simulation results compared to the measured data are included.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.174-178
• /
• 2001

An improved stationary frame-based digital current control technique for a permanent magnet (PM) synchronous motor is presented. Generally, the stationary frame current controller is known to provide the advantage of a simple implementation. However, there are some unavoidable limitations such as a steady-state error and a phase delay in the steady-state. On the other hand, in the synchronous frame current regulator, the regulated currents are dc quantities and a zero steady-state error can be obtained through the integral control. However, the need to transform the signals between the stationary and synchronous frames makes the implementation of a synchronous frame regulator complex. Although the PI controller in the stationary frame gives a steady-state error and a phase delay, the control performance can be greatly improved by employing the exact decoupling control inputs for the back EMF, resulting in an ideal steady-state control characteristics irrespective of an operating condition as in the synchronous PI decoupling controller. However, its steady-state response may be degraded due to the inexact cancellation inputs under the parameter variations. To improve the control performance in the stationary frame, the disturbance is estimated using the time delay control. The proposed scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.