• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 춘계학술발표논문집
• /
• pp.309-312
• /
• 2008

본 연구개발에서는 실리콘 오일을 가소제로 사용하지 않고 파라핀 오일과 재생 오일을 사용하고, 부착 강화제를 사용하여 실리콘 실란트를 제조하였다. 기본적인 다목적 실리콘 실란트 Formulation에 가소제인 실리콘 오일을 파라핀계 오일로 교체하여 토출성을 높여 작업성을 증진시켰으며, 접착 증진제의 교체로 무기 피착제와 폴리머와의 접착에서 각종 플라스틱, 아크릴, 폴리카보네이트 등과의 접착이 되도록 하였다. 비실리콘 오일의 교체로 기본 물성과의 차이를 극복하는 것과 접착 증진제 선택과 비율 조정이 제품화의 주요 기술이었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.220-221
• /
• 2014

The various type of polymer such as silicone, modified silicone, polyurethane, etc are being used in domestic construction sealant market. Once sealant is installed in building, it should maintain their specific performances such as preventing moisture, rain, air, etc against environment conditions for several decades. In this study, weather resistance as per polymer type of sealant has been evaluated using QUV accelerated weathering tester. As a result, weather resistance of silicone is highest and modified silicone is lowest in the comparison of other type of polymer.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.75-77
• /
• 2014

Using sealant for window installation is sealing the gap between the window frame and outer wall (such as concrete). A sealant serves to prevent external environmental impacts such as moisture, rain, sand, and dust entering inside of the building and make the building durable. In order to fulfill basic jointing function of sealing, at least 6 mm joint gap between two bonding surfaces are required. Also, adhesion performance between sealant and surfaces and the compatibility with other building materials are required to check before installation. In general, 2 part polyurethane sealant and 1 part silicone sealant are most common materials for sealing the joint of window. In this study, adhesion performances of those two generic sealants reflecting actual application conditions and the compatibility evaluations with other building materials are conducted to propose proper window installation procedures.

• 접착 및 계면
• /
• 제2권4호
• /
• pp.1-9
• /
• 2001

실리콘 실란트는 실리콘폴리머, 가소제(plasticizer), 가교제(crosslinker), 충전제(filler), 촉매(catalyst), 첨가제(additive) 등으로 제조할 수 있으며, 실란트의 실용특성에는 각 제조변수의 종류와 혼합비율이 크게 영향한다. 알코올형 실리콘 실란트는 최근들어 환경적인 이점 때문에 그 사용이 늘고 있다. 본 연구에서는 상온경화형 일액형 알코올형 실리콘 실란트를 PDMS(polydimethylsiloxane)의 점도를 달리하여 제조한 후 그 접착특성을 평가하였다. 또한 점도 20000과 80000 cps의 PDMS를 혼합 사용하고 가교제, 가소제, 촉매 등의 함량을 변화시켜가면서 실란트를 제조하고 접착특성을 평가하였다. 또한 각 실란트의 제조과정 중의 반응온도 변화를 기록하여 적절한 제조조건을 얻도록 하였다. 실란트 제조시 혼합물의 온도가 $40^{\circ}C$ 이하가 되도록 제조변수의 조성을 조절하여 적합한 물성의 실란트를 제조할 수 있었다. 피착재에 따라 접착력이 달라졌으며, 유리/유리 > 유리/알루미늄 > 알루미늄/알루미늄 순으로 나타났다. 실란트의 신장률은 폴리머 점도와 가소제의 함량 증가에 따라 증가하였으며, 강도는 가교제와 가소제 함량 감소와 촉매함량 증가에 따라 증가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.78-80
• /
• 2014

Silicone structural glazing (SSG) is a method utilizing a silicone adhesive to attach glass, metal, or other panel material to the structure of a building. Windload and other impact loads on the facade are transferred from the glass or panel through the silicone structural sealant to the systems' framework. Silicone structural glazing systems are currently a very common method of glazing throughout the world. Locally, structural silicone glazing has become very common to achieve aesthetically pleasing and high utilization of small land for both residential and commercial building. Although structural silicone glazing has been utilized for approximately thirty years in Korea, the understanding of its technology was low and limited. Consequently, Korean projects experienced many quality issues during assembly and construction, even in very recently finished buildings. Adhesion loss and water infiltration occurred on more than one project, and the time and cost to repair these issues were substantial. In general, there are two kinds of structural silicones depending on fabrication methods. 1part structural silicone is for site glazing system and 2part structural silicone is for unitized factory glazing system. In this paper, 2part structural silicone which is very common for factory fabricating curtainwall systems was evaluated with regards to various mixing ratio. Since the structural performance of 2part sealant can be affected by mixing ratios, some extra ranges of recommended mixing ratio were evaluated to see any performance differences. Besides on cure profile, comparative evaluations for mechanical properties and adhesion develop on common building substrates were conducted.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.69-70
• /
• 2017

In Korea, silicone type sealant is widely used for construction site. Before the silicone type, urethane type is one of the main type sealants. However, the weathering property is less than the silicone type, the urethane type is replace by the silicone one. Still the urethane type is used for the inside of the buildings for the perimeter of the window. The silicone type sealants are better in weathering property than those of the urethane type sealants. Except the weathering property urethane type sealant has its own advantage like movement property, low cost and so forth. There are many research results for the outdoor weathering of the sealants, but in Korea there are no results for the outdoor weathering for construction sealants. This research is focused on the outdoor weathering of the urethane sealants, how to measure the degradation, and compare the products which used in Korea. The outdoor weathering test is usually time consuming, thus we designed specialized device for accelerating the result.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.188-189
• /
• 2019

In this study, the characteristics of single-component and other sealant were analyzed to provide repair methods and effective utilization of sealant due to crack generation. Humidity studies have shown that acrylic silicone is effective in many areas of fluidity and temperature change, and that polysulfide-silicon is most effective in resistance to linear expansion coefficient and external pressure. Therefore, the difference between drying shrinkage and thermal expansion coefficient between various building materials and sealant, as well as the use of sealant, is analyzed, and construction methods derived accordingly, and prevention of defects are considered to be part of the construction project.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1076-1077
• /
• 2006

Conductive pastes consist of conductive fillers( Au, Ag, Ni, Cu etc.), organic binders, solvents and additives. Meanwhile, there are some metal powders such as copper, nickel etc that are used for pastes which have serious surface corrosion problems. This problem leads to change of the color and decrease in conductivity and affect storage stability of conductive pastes. By using silane coupling agent and dispersion agent, we can ensure both the corrosion stability and long term storage stability, and enhance the high performance electrical and mechanical properties of EMI shielding silicone sealant.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2010년 추계학술대회 논문집
• /
• pp.211-216
• /
• 2010

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 추계학술발표논문집
• /
• pp.341-343
• /
• 2007

본 연구개발에서는 은나노를 포함한 비오염성 석재용 실리콘 실란트를 제조하였다. 기본적인 실리콘 실란트 Formulation에 오일에 의한 오염성을 최소화하기 위해 편말단 폴리머를 사용하였다. 폴리머 가교를 통해 접착성과 작업성 등의 물성을 향상시켰으며, 나노크기의 은 powder를 사용하여 항균성을 부여하였다. 가장 큰 관건은 nano size의 은을 가장 균일하게 실란트에 분산시키는 것이 실란트 제품화의 주요 기술이었다.