• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.121-135
• /
• 2004

The purpose of this study is to analyze the image evaluation and the preference of tailored jacket according to the body type and the degree of satisfaction with their body of middle-aged women. The subjects used for this study were three hundred and twenty three middle-aged women ranging from 35 to 50 years old. We measured their bodies and asked them report to the questionnaire. The results are as follows. 1) Middle-aged women were classified into four typical types of body. The type 1 was tall and thin and had a front view silhouette with the form of a letter X. The type 2 was the tallest and the medium of fatness and had a front view silhouette with the form of a letter H that the lower part of the body is short. The type 3 was the medium of height and width and had a front view silhouette with the form of a letter A that the upper part of the body is short compared with their height. The type 4 were the shortest and the fattest and had a front view silhouette with the form of a letter Y that the lower and upper parts of the body is the longest. 2) Middle-aged women roughly tended not to be satisfied with part of their body. The results showed that a neck was the most satisfied body part and the weight was the least satisfied as well as overall leg shape among all 13 body parts. 3) The type 1 had the highest the degree of satisfaction on their face size, upper arm girth, waist, hip girth, weight and body shape, etc., excepting hip shape among 4 body types.

• Journal of Welding and Joining
• /
• v.14 no.5
• /
• pp.145-150
• /
• 1996

The variation of spatter generation in gas metal arc welding with welding conditions and wire compositions was investigated and interpreted in terms of arc stability. The transition range from a short circuit mode to a spray mode in the mixed gas welding showed an unstable arc and generated the largest amount of spatters. Titanium reduced spatters only in the globular mode of $CO_2$welding and silicon and manganese showed the same effect The effect of silicon and manganese, however, was no longer seen when titanium was added simultaneously to the wire. It is believed that deoxidizers easily form oxides on the anode and make the arc stable even in DCRP welding. The wires with deoxidizers also showed low short circuit frequency, resulting in the increase of large size spatters.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.523-527
• /
• 2004

This paper presents a new design methods of the short-term load forecasting system (STLFS) using the data mining. The proposed predictor takes form of the convex combination of the linear time series predictors for each inputs. The problem of estimating the consequent parameters is formulated by the convex optimization problem, which is to minimize the norm distance between the real load and the output of the linear time series estimator, The problem of estimating the premise parameters is to find the parameter value minimizing the error between the real load and the overall output. Finally, to show the feasibility of the proposed method, this paper provides the short-term load forecasting example.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1871-1873
• /
• 2002

Partial Discharge is radiated in the form of electromagnetic wave from variable sources. It can be taken by UHF antenna and the signal pulse from that has a nonstationary time-series which can be evaluated with several methods. One of them is STFT(short time fourier transform) processed in frequency region. Statistical results using STFT show the possibility being able to discriminate between several PD sources.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.2
• /
• pp.111-120
• /
• 2011

A two-dimensional analytical model for deriving the threshold voltage of a short channel fully depleted (FD) cylindrical/surrounding gate MOSFET (CGT/SGT) is suggested. By taking into account the lateral variation of the surface potential, introducing the natural length expression, and using the Bessel functions of the first and the second kinds of order zero, we can derive potentials in the gate oxide layer and the silicon core fully two-dimensionally. Making use of these potentials, the minimum surface potential can be obtained to derive the threshold voltage as a closed-form expression in terms of various device parameters and applied voltages. Obtained results can be used to explain the drain-induced threshold voltage roll-off of a CGT/SGT in a unified manner.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.1
• /
• pp.3-9
• /
• 1995

An isotropic electric-field probe, capable of characterizing and quantifying electromagnetic field, was fabricated. The probe consists of three short dipole antennas, a beam-lead Schottky diode and the high resistive transmission line. In order to get the isotropic response three mutually orthogonal dipoles are configured to form the probe. The probe's short dipole elements allow measurements of electric fields from 300MHz to 2GHz with a flatness of .+-. 2.9dB. The mutually orthogonal dipole configration shows a .+-. 1.2dB deviation in the isotropic response with respect to angle.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.3
• /
• pp.19-30
• /
• 2019

This study summarizes domestic and foreign previous works on fluvial terrace with absolute ages to discuss formative process of climatic terrace in Korea. Different from traditional climatic terrace model, approximately three quarters from foreign works have argued that formation of climatic terrace can be attributed to medium- and short-term climatic change or other environmental factors, rather than long-term climatic change of glacial and interglacial cycles. Based on previous works on fluvial terrace in Korea, it can be suggested that fluvial terrace in Korea formed not due to long-term climatic change of 100,000-year cycles related to glacial and interglacial cycles, but due to medium- and short-term climatic change or climatic event of tens of thousands of years related to intensity change in summer monsoon, one of the important factors affecting precipitation in Korea.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.359-369
• /
• 2005

It has been suggested that morphologic characteristics of the periodontium are partly related to the shape and form of the teeth. Furthermore, the severity of symptoms of periodontal disease have been proposed to differ among these various morphologic entities or "biotypes". The purpose of the present study was to examine the relationship between the form of the crowns in the maxillary anterior tooth segment and (1) a group of morphological characteristics and (2) the thickness of the gingiva. The thickness of gingiva was measured by ultrasonic device(SDM). 100 subjects devoid of symptoms of destructive periodontal disease were examined regarding, e.g., probing depth, gingival recession, width of keratinized gingiva, thickness of the keratinized gingiva. From maxillary study cast, the width(at the apical third-CW) and the length(CL) of the crowns of the 6 anterior teeth were determined. A CW/CL-ratio was calculated for each tooth and averaged for each tooth region. The individual mean CW/CL-ratio values for the central incisors were ranked. The 10 subjects ranked highest and the 10 ranked lowest were selected as having either a long-narrow(group N) or a short-wide(group W) form of the crown of the tooth. The data for each of the examined parameters were averaged for each tooth region in each subject and mean values for subjects in groups W and N were compared using the Student t-test. Stepwise multiple regression analysis, including data from the whole sample, was performed for each tooth region with the thickness of the free gingiva as the dependent variable. The results from the analyses demonstrated that individuals with a long-narrow form of the central incisors displayed, compared to individuals with a short-wide crown, form (l) a narrow zone of keratinized gingiva, (2) a pronounced "scalloped" contour of the gingival margin. There was no significant difference between groups N and W with respect to the thickness of the keratinized gingiva. The CW/CL-ratio data revealed that a certain form of the crowns in the central incisors was accompanied by a similar form in the lateral incisors and canine tooth region. The regression analyses demonstrated that the thickness of the keratinized gingiva in central, lateral incisors and canines was significantly related to the width of the keratinized gingiva.

• Communications of the Korean Mathematical Society
• /
• v.14 no.3
• /
• pp.581-595
• /
• 1999

In the present paper we provide a short of the uni-form CLT for the function-indexed martingale difference process under the uniformly integrable entropy by establishing a maximal inequality.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.1
• /
• pp.125-134
• /
• 2009

Objectives : The purpose of this study is to find out the effects of muscle energy techniques on nuchal pain caused by traffic accidents. Methods : The 20 patients were divided into 2 groups: group A was treated except muscle energy techniques and group B was treated with muscle energy techniques. Both groups were treated with acupunture treatment, physical theraphy and herbal medication. Patients were evaluated by McGill Pain Questionnaire-Short Form(SF-MPQ), Pain Disability Index(PDI) and Neck Disability Index(NDI) in traffic accident patients. Results : 1. Both Group were significantly decreased in sensory of SF-MPQ, VAS, PDI and NDI after 7 days of treatment. 2. Group B compared with the Group A was significantly decresed in VAS, PDI after 7 days of treatment. Conclusions : We found out that muscle energy techniques is considered to be effective and useful on nuchal pain caused by traffic accidents.