• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.805-811
• /
• 2016

Prior to installation in a navy ship, shipboard equipment should be qualified by shock test requirements. The multi-function console mounted on the elastic platform of the ship should also withstand given shock loads. In this study, both real shock test methods, as well as numerical computer simulations using the finite element method were used to verify structural durability under shock load conditions. First, we used domestic test facilities to perform possible shock tests, including an impact hammer test, a drop table test and a shaker shock test. Full model tests satisfying the shock response spectrum level were performed. Thereafter, an analytical model of the complex console structure was built by the finite element method. Finally, numerical results were verified by modal test results of the real product and an FEA analysis was also performed with a full model transient response analysis.

• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.279-287
• /
• 2018

This study investigated applicability of the fast running model for damage assessment of underground structures by ground shock. For this reason, the fast running model that consists of two main models such as the ground shock generation and propagation model and the underground structural damage assessment model was developed. The ground shock generation and propagation model was programed using theoretical formula and empirical formula introduced in TM5-855-1(US army manual). The single degree of freedom model of structural components was utilized to predict structural dynamic displacements which are used as index to assess damage level of components. In order to confirm the feasibility of the developed fast running model, underground structural dynamic displacements estimated from the fast running model were compared to displacements obtained from the finite element analysis.

• 한국ITS학회 논문지
• /
• 제12권3호
• /
• pp.103-113
• /
• 2013

충격파모형은 교통류에서 운동학적 파동이 전파되는 속도이며, Lighthill과 Whitham(L-W)에 의해 처음 제시되 이래 지금까지 많은 교통류 문제에 적용되어지고 있다. 최근의 한 논문은 실재상황에서 발생되지 않는 충격파가 L-W모형에서 예측되는 모순을 지적하였고, 이러한 모순이 발생되는 원인과 이를 해소하는 새로운 점진적충격파모형을 제시한 바 있다. 그러나 이 모형은 교통류 흐름 중 감속하는 교통류에 대해 한정하여 유도 되었으며 반대상황 즉 가속하는 교통류에 대한 모형은 아직 제시되지 못하고 있다. 본 연구에서는 가속 교통류에 대한 점진적 충격파모형을 유도하고 이를 검증하고자 한다. 이를 위해 가속상태의 교통류에서 추종차량의 가속에 따른 차량간의 간격이 Greenshield의 모형을 충실히 따르도록 한정하고 이를 바탕으로 충격파모형을 유도하였다. 그 결과 본 연구에서 제시된 모형은 L-W모형의 모순이 해소됨을 확인하였고, 사례교통량을 적용해 기존모형들과의 결과 차이를 정량적으로 확인하였다. 한편 모형간의 차이가 분명하고도 구조적인 것을 확인하였고 이에 대한 추가적인 향후 연구의 필요성을 제시하였다.

• 조명전기설비학회논문지
• /
• 제20권6호
• /
• pp.63-68
• /
• 2006

22,900[V] 전압에서 발생하는 감전사고를 살펴보기 위하여 최근의 감전사고에 대한 통계자료를 분석하였다. 22,900[V] 전압의 감전사고의 메커니즘을 실증하기 위해서 분석 결과에 근거하여 모의 감전사고 실험을 수행하였다. 실험에서는 여러 가지 상황에서 모의된 감전사고의 위험성을 정량적으로 분석하기 위하여 인체모형에 흐르는 전류를 측정하였다. 실험결과 감전 상황과 관계없이 일단 감전사고가 발생하면 인체에 치명적인 것으로 밝혀졌다.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1327-1335
• /
• 2002

The shock wave process represents an abrupt change in fluid properties, in which finite variations in pressure, temperature, and density occur over the shock thickness which is comparable to the mean free path of the gas molecules involved. This shock wave fluid phenomenon is simulated by using the finite difference lattice Boltzmann method (FDLBM). In this paper, a new model is proposed using the lattice BGK compressible fluid model in FDLBM for the purpose of speeding up the calculation as well as stabilizing the numerical scheme. The numerical results of the proposed model show good agreement with the theoretical predictions.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.664-670
• /
• 2004

Navier-Stokes computation based on a new simplified model is proposed to investigate the interactions of a moving shock wave with multiple vortices arranged in the serial manner. This model problem simulates shock-vortexlet interactions at the shear layer of a compressible vortex often observed in the experiment. Applying the Foppl's idea, we extended the Rankin's model generally used for the description of a single vortex to the multi-vortex version. The acoustic pulses accelerated and decelerated are successively generated and propagated from each shock-vortex interaction, which simply explains the genesis of eccentrically diverging acoustic waves appearing in the experimental photograph.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1347-1353
• /
• 2004

With respect to the researches of the optical flying head(OFH) , the head-gimbal assembly should be analyzed to guarantee the stable fabrication and the characteristics of shock resistance. The suitable design is proved through the Probabilistic analysis of the design parameters and material properties of the model. Probabilistic analysis is a technique that be used to assess the effect of uncertain input parameters and assumptions on your analysis model. Using a probabilistic analysis you can find out how much the results of a finite elements analysis are affected by uncertainties in the model. Another factor is analysis of the dynamic shock analysis. For the mobile application, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes in contact with outer shock disturbance. the system gets critical damage in head-gimbal assembly or disk. This paper describes probabilistic and dynamic shock analysis of head-gimbal assembly in micro MO drives using OFH slider.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.986-992
• /
• 2011

In this paper, the characteristics of shock behavior of multi-layered panels under impact were studied. The panels consist of four different lightweight materials including al, al-foam, rubber and FRP in order to enhance their shock energy absorption. A commercial code, Ls-dyna was used to build the numerical model and study shock behavior based on the analysis of shock response spectrum and peak response acceleration. The reliability of the numerical model was estimated by its comparison with the experimental results acquired under the same impact conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1111-1116
• /
• 2001

A transient T-F(time-frequency) signal processing technique is applied to a tilt drop and a linear shock test rigs for identification of shock characteristics of hard disk drive (HDD). The T-F technique essentially tracks the shock characteristics of pivot point response as well as head slap and lift-off phenomena. From the T-F analysis result, the shock characteristic in HDD is modeled by the two degree of freedom coupled-dynamic system, which consists of actuator arm and suspension. As shock designing tool, the maximax shock response spectrum is employed for prediction of shock performance. Finally, the shock control technique is tested with newly designed actuator arm and suspension. Experimental head slap test result shows that the shock performance is much higher with the new shockproof designed model than the current model

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.250-253
• /
• 2005

This paper is investigates the separation shock of payload fairing. Separation test of subscale PLF using half separation device and half PLA is performed. Resulting shock loads at equipment bay and fairing joint are measured. Pyroshock estimation is performed using AUTOSEA Pyroshock Module. Input data to analysis model is obtained from the separation test results of subscale PLF. And model of AUTOSEA is updated comparing results between tests and analysis.. This enables us to validate the AUTOSEA model. Tuned model of subscale PLF and separation device is used to update full scale model, and the shock analysis result of full scale model is estimated in this paper. This paper also discusses the results regarding the difficulty of structural modeling and its numerical implementation in AutoSEA2 Software.