DOI QR코드

DOI QR Code

Probabllistic and Shock Analysis of Head-gimbal Assembly in Micro MO Drives

초소형 광자기 드라이브용 HGA의 신뢰성 및 충격 해석

  • 오우석 (연세대학교 대학원 기계공학과) ;
  • 박노철 (연세대학교 정보저장기기 연구센터) ;
  • 양현석 (연세대학교 기계공학과) ;
  • 박영필 (연세대학교 기계공학과) ;
  • 홍어진 (연세대학교 대학원 기계공학과)
  • Published : 2004.12.01

Abstract

With respect to the researches of the optical flying head(OFH) , the head-gimbal assembly should be analyzed to guarantee the stable fabrication and the characteristics of shock resistance. The suitable design is proved through the Probabilistic analysis of the design parameters and material properties of the model. Probabilistic analysis is a technique that be used to assess the effect of uncertain input parameters and assumptions on your analysis model. Using a probabilistic analysis you can find out how much the results of a finite elements analysis are affected by uncertainties in the model. Another factor is analysis of the dynamic shock analysis. For the mobile application, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes in contact with outer shock disturbance. the system gets critical damage in head-gimbal assembly or disk. This paper describes probabilistic and dynamic shock analysis of head-gimbal assembly in micro MO drives using OFH slider.

Keywords

References

  1. Heong, J.H., Shim, J.Y., Lee, S.Q., Lee, J.H., Yoon, H.K. and Gwon, D.G., 2002, 'Swing Arm Type Pick-up Actuator Design for Near Field Recording', ISOM/ODS Technical Digest, pp.341-343
  2. Hata, S., Yamada, Y., Ichihara, J. and Simokohbe, A., 2002, 'A Micro Lens Actuator for Optical Flying Head', Optical Memory and Optical Data Storage Topical Meeting, International Symposium, pp.40-42
  3. 안채현, 임경화, 2003, '근접장 광기록용 슬라이더의 동특성 분석', 한국소음진동공학회논문집, 제13권, 제3호, pp. 164~171
  4. 윤상준, 김석훈, 최동훈, 정태건, 김수경, 2003, '근접장 기록을 위한 부상형 광학 헤드의 최적설계', 한국소음진동공학회논문집, 제13권, 제10호, pp.785~790
  5. 조태민, 임경화, 2004, '근접장 광기록용 서스펜션의 최적설계', 한국소음진동공학회논문집, 제14권, 제4호, pp. 295~302
  6. Hatem R. Radwan and Charles Kim, 1996, 'Semi-optical Design of Actuator Voice Coil Motors in Disk Drives, Adv. Info. Storage Syst., Vol.7, pp.315-330
  7. Jose L.Aristegui and Thomas L.Geers, 2000, 'Shock Analysis of a Disk-drive Assembly', Journal of Information Storage and Processing Systems, Vol.2 pp. 25-31
  8. Lin, C., 2002, 'Finite Element Analysis of a Computer Hard Disk Drive Under Shock', J. Mechan. Design, Vol.124 No.121
  9. Eric M. Jayson, Paul W. Smith and Frank E. Talke, 2003, 'Shock Modeling of the Head- media Interface in Operational Hard Disk Drive', IEEE Transactions of Magnetics, Vol.39, No.5, September.
  10. Zeng, Q.H. and Bogy, D.B., 2002, 'Numerical Simulation of Shock Response of Disk-suspension- slider Air Bearing Systems in Hard Disk Drives', Microsystem Technologies, Vol.8, pp.289-296 https://doi.org/10.1007/s00542-002-0186-6
  11. Eric M. Jayson, James M. Murphy, Paul W. Smith and Frank E. Talke, 2002, 'Shock and Head Slap Simulations of Operational and Nonoperational Hard Disk Drives', IEEE Transactions of Magnetics, Vol.38, No.5, September
  12. Brian, H., David, and B. Bogy, 2004, 'A Parametric Study of Head-disk Interface Instability Due to Intermolecular Forces', IEEE Transactions of Magnetics, Vol.40, No.1, pp.337-344 https://doi.org/10.1109/TMAG.2003.821156